Service Manuals, User Guides, Schematic Diagrams or docs for : Tektronix TDS7000 TekScope_Opt_App_1.0.10_071-1883-01_063-3914-10 TekScope_Opt_App_1.0.10_071-1883-01_063-3914-10 Applications 02_UWB readme

Date: 09/20/2007

Product: Tektronix Ultra Wideband Spectral Analysis
Version: v2.1.0 (Sep 20, 2007)

===============================================================
Contents of this Readme File:

1. System Requirements
2. Contents of Distribution
3. New Features
4. Release Notes
5. Known Problems and Limitations
6. Installation
7. Contact Information


===============================================================
1. System Requirements

- Tektronix Ultra Wideband Application Software is intended
  for Tektronix TDS/DSA/DPO Real-Time Oscilloscopes with 7GHz
  or greater bandwidth.


===============================================================
2. Contents of Distribution

- Tektronix Ultra Wideband Application Software
- MATLAB run-time library
- Sample waveform files, including:
    High Speed Serial
    Radar
    WiMedia


===============================================================
3. New Features:

V2.1.0 (2007-Sep-20)
    -Spectral+Downconversion Analysis type for for extended
     spectral analysis software such as Tektronix RSA Vu.
    -User setable Resolution Bandwidth for Spectrogram and PSD
    -Time linked cursors now include Power Spectral Density
    -Recalculate enables analysis of one waveform several ways. 

V2.0.1 (2007-Apr-30)
    -Improved handling of long record-length acquisitions.
    -Added "WiMedia / Wireless-USB Compliance Test" mode
     (enables CPE filter and limits analysis to 96 symbols).
    -Correction to EVM calculation when using CPE filter.
    -Corrected behavior when Data Rate is set to "Manual"
     and packet contains more than 96 symbols.
    -Updated Constellation plot to reflect all symbols
     analyzed (had been limited to first 100 symbols only).
    -Corrected a GPIB bus timeout problem which could lead to
     application lock-up under certain acquisition conditions.

V2.0.0 (2007-Mar-21)
    -Initial general release of TekUWB.
    -Analyze how complex wideband signals change in frequency
     and amplitude with time using Spectrograms to 20GHz.
    -Measure how signal power is distributed with frequency
     using Power Spectral Density plots to 20GHz.
    -Analyze specific signals in the presence of other traffic
     using time-gating and/or packet-selection within records
     up to 200 Mpts.
    -Correlate Frequency-domain to Time-domain with cursors
     linking Amplitude-vs-time and frequency-vs-time displays.
    -Automatically detect all 10 Time Frequency Codes and all
     8 data rates directly from WiMedia RF waveforms for easy
     setup and analysis.
    -Digital down conversion, demodulation and analysis of all
     6 WiMedia Bandgroups.
    -QPSK and DCM constellations and EVM tests based on the
     automatically detected data rate.
    -Adjacent Channel Power Ratio measurements in all bands
     within a bandgroup from a single waveform.
    -"Test All" function makes quick work of analysis, results
     logging and export of MB-OFDM modulated waveform files.


===============================================================
4. Release Notes

- "Analysis Type" popup-menu has 5 options:
    -Spectral Only (no modulation)
    -Spectral + Down conversion 
    -WiMedia MB-OFDM Modulation
    -WiMedia MB-OFDM Modulation w/CPE Correction
    -WiMedia / Wireless-USB Compliance Test

- Default mode is "Spectral Only".

- When performing a WiMedia analysis:
    -The user should select the appropriate bandgroup for the
     signal being studied via the "Band Group" buttons (1-6).
    -This application can auto-detect the TFC of the signal.
     However, if problems are encountered during demodulation,
     the user can override auto-detection by toggling the
     Auto/Manual button in the TFC section of the UI and then
     selecting a new TFC via the up/down arrows.
    -This application can also auto-detect the data rate.
     However, if problems are encountered during demodulation,
     the user can override auto-detection by toggling the
     Auto/Manual button in the Data Rate section of the UI and
     then selecting a new data rate via the up/down arrows.
    -If the data rate is set to "Auto", then the number of
     symbols to analyze is determined automatically from the
     packet header.  If the data rate is set to "Manual", then
     all symbols found when scanning through the packet payload
     are analyzed.
    -For the Compliance Test (menu item 4), the CPE filter is
     activated and only the first 96 symbols are analyzed.
    -The application display is modified as follows:
        -Power Spectral Density analysis is separated by band,
         and ACPR, mask test, and power measurements are
         included.
        -The Constellation plot and EVM analysis are included.
        -The Information box (containing date, scope setting,
         etc.) includes additional information on modulation.
        -The Results History is populated.

- Packet detection and selection:
    -This application features a packet detector which scans
     the waveform and tries to identify the presence of a
     finite-duration signal.  When multiple packets have been
     identified, the user can select which packet to analyze
     via the "Packet Selection" buttons on the UI:
        -1st: Analyze first  packet only
        -2nd: Analyze second packet only
        -3rd: Analyze third  packet only
        -4th: Analyze fourth packet only
        -ALL: Analyze all packets in succession (100 max)
        -OFF: Analyze entire waveform (ignore packets)

- Interactive zoom feature is available on all plots:
    -Click and drag to select zoom area.
    -Click once w/out dragging to zoom back to previous view.
    -Double-click to return to full view.

- Details on WiMedia terminology:
    -Band numbering: There are 14 bands each 528MHz wide across
     the 3100MHz-10600MHz UWB spectrum.
    -Bandgroups: There are 6 "bandgroups" within this spectrum.
    -Bandgroups 1-4 and 6 consist of three 528 MHz bands, while
     bandgroup 5 consists of only two 528 MHz bands.
    -Bandgroups 1-5 lie in sequence across the UWB spectrum.
    -Bandgroup 6 straddles bandgroups 3 and 4, sharing 2 bands
     from bandgroup 3, and 1 band from bandgroup 4.
    -Time Frequency Codes (TFC): 10 hopping patterns which
     determine the logical channelization. Bandgroup 5 has only
     4 possible TFCs because it occupies only two 528MHz bands.
     This software automatically determines TFC from the RF
     waveform, though manual TFC specification is possible on the
     UI in order to aid in debugging problematic waveforms.
    -Common Phase Error (CPE) of the transmitter is corrected on
     a symbol-by-symbol basis in the EVM calculation.
    -CPE filtering analysis allows the EVM calculation to "see"
     the transmitter's phase noise impairments.
    -The EVM is calculated over the payload of the packet only.
     The calculation includes initial channel estimation using
     the CE symbols and phase and timing estimation and
     correction using the pilot tones as well as estimating the 
     frequency offset. The phase error is estimated using the
     pilot tones and the timing error and common phase error is
     calculated. Timing error is corrected. The CPE is applied 
     to the CPE filter if the appropriate WiMedia analysis type
     is selected in the popup menu (see above).
     For each data and pilot subcarier the Euclidean distance to
     the closest constellation point is calculated. The RMS
     error is calculated using the WiMedia equation. The pk error
     is also displayed as well as pass/fail according to the test
     specification limits.


===============================================================
5. Known Problems and Limitations

- Tektronix Ultra Wideband Spectral Analysis requires:
     -Minimum acquisition sample rate: 250MS/s
     -Minimum acquisition record length: 1kpts

- When using TekUWB with very long captured waveforms (generally
  over 200 Mpts), it is possible for the application to run out
  of available memory with the operating system.  This condition
  depends on the number of other applications running, the
  length of the waveform being analyzed, and what type of
  analysis is being performed.  If an "OUT OF MEMORY" error
  message is encountered, we recommend using the time gating
  feeature on the oscilloscope to reduce the amount of data being
  analyzed.  To use this feature, place the instrument cursors
  around the part of the captured waveform you wish to analyze
  before beginning an analysis with TekUWB.


===============================================================
6. Installation

  A. Double-click on the setup.exe file located on the CD.
  B. Follow the default prompts.
       1. If a MATLAB Component Library 7.5 installer message
          concerning .NET Framework is shown, simply click on
          OK to continue the install.
  C. This will install three components:
       1. Tektronix Ultra Wideband Application Software
       2. MATLAB run-time library
       3. Test Waveform files
  D. A "Ultra Wideband Spectral Analysis" menu item is
     added to the TekScope Analyze or Application (App) menu.


===============================================================
7. Contact Information

- Telephone:
    Contact your North America Tektronix Representative at:
      1-800-833-9200
        Sales support,      select option 1
        Service support,    select option 2
        Technical support,  select option 3

    For product support outside of North America, contact your
    local Tektronix sales office or distributor.


-WEB:
    http://www.tek.com/

    Click on "Software & Drivers" under the "Resources" set of
    links on the left.

    Type "Ultra-Wideband" into the search field and click "GO".

---End of File---