Service Manuals, User Guides, Schematic Diagrams or docs for : Tektronix TDS7000 TekScope_Opt_App_1.0.10_071-1883-01_063-3914-10 TekScope_Opt_App_1.0.10_071-1883-01_063-3914-10 Applications 07_HT3-1.3 DTG_Pattern_Files Readme

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
Preview not available!
Sorry, no preview image available for this document.
Possible reasons are : this is not a PDF document, it is password protected or the file is partially corrupted.
We are working to fix the issue.
You can still download the full file from the link below and it will be viewable.



>> Download Readme documenatation <<

Text preview - extract from the document
HDMI Compliance Test Software(1.3) (DTG Distribution)

Product:  TDSHT3v1-3 (DTG Distribution)
Version:  3.3.1 
Date   :  10th October 2007

================================================================================

What is in this file:

1. System Requirements
2. Installation 
3. Contact Tektronix

================================================================================

1. System Requirements
  - The HDMI Compliance Test Software(1.3) is compatible with the following 
    instruments:

	 Product      Firmware-Version 	
	==========   ==================
	 DTG5274           1.0.14	
         DTG5334	   2.0.4

  - Disk space requirements:
    585Mb of free disk space to install and operate this application.

================================================================================

2. Installing DTG Patterns

  The Sink and Cable tests require DTG Patterns on the DTG at -
  C:\TekApplications\TDSHT3v-3 sub-folder.  Install the DTG Pattern 
  files on the Data Timing Generator (DTG 5274/DTG 5334).
  
  If the DTG Pattern files are not installed on the DTG hard disk, perform the 
  following steps to install it from the Optional Applications Software on a 
  Windows-Based Oscilloscope Compact disc (CD-ROM):

  i. If the keyboard is not installed, connect it to the oscilloscope rear panel
     (the optional-accessory keyboard plugs into the USB connector).

  ii. Power on the DTG to start Windows.

  iii. Install the optional applications software CD in the CD-ROM reader 
       of the DTG.

  iv. The autorun utility will start the installation program.  If the autorun 
      utility doesn't start up automatically, browse to the CDROM and 
      double-click the launch.exe.

  v. Click 'HDMI Compliance Test(1.3)'.

  vi. Click 'DTG INSTALL'. This will install the DTG Pattern files at - 
      C:\TekApplications\TDSHT3v1-3  sub-folder on the DTG.        

  Or if you have downloaded the DTG patterns installables from the Web, then 
  double-click TDSHT3v1-3_DTG_Distribution.exe to get the pattern files installed 
  at - C:\TekApplications\TDSHT3v1-3  sub-folder on the DTG.

================================================================================



3. Contact Tektronix
 
For any assistance or feedback on the TDSHT3v1-3, please send an email to: 
- [email protected] or
- [email protected] 

---End of File---



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo