Service Manuals, User Guides, Schematic Diagrams or docs for : Tektronix TEK CTS850 Test Set Reference 85p2cmds
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 85p2cmds documenatation <<
Text preview - extract from the document
CTS 850 Cross-Reference listing Remote Commands 10/23/98 Matt Fichtenbaum There are now two separate files. Each begins with the various major menus (Test Setups, Tx #1, Tx #2, Utility, etc.) and lists, for each horizontal menu button, the assocaited HIF page(s) and the sequence numbers of those pages in the listing. This "index" is new. Then comes the main listing, a picture of each HIF screen listing the menu items on the screen together with their screen labels and either (1) the remote commands associated with each item, or (2) the vertical menu button choices associated with each item (new). Document file 85p2cmds.doc lists Remote Commands; Document file 85p2vert.doc lists the Vertical Menu Choices. CTS 850 Cross-Reference listing Remote Commands 1 INDEX ** denotes pages that have no menus and are not shown ----P_RESULTS_MAJOR_MENU1---- TEST SDH PDH JITTE ERROR PERF -more SUMMA RESUL RESUL WANDE ANALY ANALY 1 of---------------------- Button Page 1. ** P_RESULTS_TEST_SUMMARY_PARAM1 2. ** P_RESULTS_ALL_RESULTS_PARAM1 ** P_RESULTS_ALL_RESULTS_SDH_SECTION_DEFECTS_PARAM1 3. ** P_RESULTS_ALL_RESULTS_PARAM1 ** P_RESULTS_ALL_RESULTS_SDH_SECTION_DEFECTS_PARAM1 4. ** P_RESULTS_ALL_RESULTS_PARAM10 5. ** P_RESULTS_ALL_RESULTS_PARAM1 ** P_RESULTS_ALL_RESULTS_SDH_SECTION_DEFECTS_PARAM1 6. 3 P_PERFORMANCE_ANALYSIS_M2101_PARAM1 ========================================= ----P_RESULTS_MAJOR_MENU2---- TEST SDH PDH HISTO SAVE RECAL -more SUMMA RESUL RESUL GRAPH RESUL RESUL 2 of ---------------------- Button Page 1. ** P_RESULTS_TEST_SUMMARY_PARAM1 2. ** P_RESULTS_ALL_RESULTS_PARAM1 ** P_RESULTS_ALL_RESULTS_SDH_SECTION_DEFECTS_PARAM1 3. ** P_RESULTS_ALL_RESULTS_PARAM1 ** P_RESULTS_ALL_RESULTS_SDH_SECTION_DEFECTS_PARAM1 4. ** P_RESULTS_HISTORY_GRAPHS_PARAM1 5. 7 P_RESULTS_SAVE_RESULTS_PARAM1 6. 6 P_RESULTS_RECALL_RESULTS_PARAM1 ========================================= ----P_RX_MAJOR_MENU---- RECEI SIGNA JITTE TRANS PATH SETTI STATU WANDE OVERH OVERH ---------------------- Button Page 1. 19 P_RX_SETTINGS_PARAM1 20 P_RX_SETTINGS_TRIB_PARAM1 2. ** P_RX_SIGNAL_STATUS_PARAM1 ** P_RX_SIGNAL_STATUS_PARAM2 3. 11 P_RX_JITTER_WANDER_PARAM1 ** P_TX_JITTER_PARAM1_NO_OPTION 4. 22 P_RX_TRANSPORT_OVERHEAD_PARAM1 5. 12 P_RX_PATH_OVERHEAD_PARAM1 13 P_RX_PATH_OVERHEAD_V5_PARAM1 14 P_RX_PATH_OVERHEAD_VC12_PARAM1 15 P_RX_PATH_OVERHEAD_VC3_PARAM1 ========================================= ----P_RX_SDH_MAJOR_MENU1---- RECEI 64k R SIGNA ANALY JITTE -more SETTI SETTI STATU CONFI WANDE 1 of ---------------------- Button Page 1. 17 P_RX_SDH_SETTINGS_PARAM1 18 P_RX_SDH_SETTINGS_TRIB_PARAM1 2. 16 P_RX_SDH_K64_SETTINGS_PARAM1 CTS 850 Cross-Reference listing Remote Commands 2 3. ** P_RX_SIGNAL_STATUS_PARAM1 ** P_RX_SIGNAL_STATUS_PARAM2 4. 8 P_RX_ANALYSIS_CONFIGURATION_SETTINGS_PARAM1 5. 11 P_RX_JITTER_WANDER_PARAM1 ** P_TX_JITTER_PARAM1_NO_OPTION ========================================= ----P_RX_SDH_MAJOR_MENU2---- RECEI 64k R SECTI PATH Rx CA -more SETTI SETTI OVERH OVERH VOICE 2 of ---------------------- Button Page 1. 17 P_RX_SDH_SETTINGS_PARAM1 18 P_RX_SDH_SETTINGS_TRIB_PARAM1 2. 16 P_RX_SDH_K64_SETTINGS_PARAM1 3. 22 P_RX_TRANSPORT_OVERHEAD_PARAM1 4. 12 P_RX_PATH_OVERHEAD_PARAM1 13 P_RX_PATH_OVERHEAD_V5_PARAM1 14 P_RX_PATH_OVERHEAD_VC12_PARAM1 15 P_RX_PATH_OVERHEAD_VC3_PARAM1 5. 9 P_RX_CAS_VOICE_SETTINGS_PARAM1 10 P_RX_CAS_VOICE_SETTINGS_PARAM2 ========================================= ----P_TEST_SETUP_MAJOR_MENU---- TEST RECAL RECAL SAVE SAVE JITTE INSTRUMENT PASS/ INSTRUMENT PASS/ CONTR SETUP TESTS SETUP TESTS TESTS ---------------------- Button Page 1. 36 P_TEST_SETUP_TEST_CONTROL_PARAM1 2. 32 P_TEST_SETUP_RECALL_INSTRUMENT_SETUPS_PARAM1 3. 33 P_TEST_SETUP_RECALL_PASS_FAIL_TESTS_PARAM1 4. 34 P_TEST_SETUP_SAVE_INSTRUMENT_SETUPS_PARAM1 5. 35 P_TEST_SETUP_SAVE_PASS_FAIL_TESTS_PARAM1 6. 25 P_TEST_JITTER_OUTPUT_PARAM1 26 P_TEST_JITTER_POINTER_PARAM1 27 P_TEST_JITTER_RECALL_RESULTS 28 P_TEST_JITTER_SAVE_RESULTS 29 P_TEST_JITTER_SPECTRUM_PARAM1 30 P_TEST_JITTER_TOLERANCE_PARAM1 31 P_TEST_JITTER_TRANSFER_PARAM1 ** P_TEST_JITTER_VIEW_DATA_TOLERANCE ** P_TEST_JITTER_VIEW_DATA_TRANSFER ** P_TEST_JITTER_VIEW_GRAPH_SPECTRUM ** P_TEST_JITTER_VIEW_GRAPH_TOLERANCE ** P_TEST_JITTER_VIEW_GRAPH_TRANSFER ** P_TX_JITTER_PARAM1_NO_OPTION ========================================= ----P_TX_MAJOR_MENU---- TRANS ERROR POINT JITTE APS TRANS PATH SETTI & ALA & TIM WANDE COMMA OVERH OVERH ---------------------- Button Page 1. 49 P_TX_SDH_SETTINGS_PARAM1 50 P_TX_SDH_SETTINGS_TRIB_PARAM1 51 P_TX_SETTINGS_PARAM1 52 P_TX_SETTINGS_THROUGH_MODE_PARAM1 53 P_TX_SETTINGS_TRIB_PARAM1 2. 39 P_TX_ERRORS_ALARMS_PARAM1 3. 45 P_TX_POINTERS_TIMING_FREQUENCY_PARAM1 46 P_TX_POINTERS_TIMING_PARAM1 47 P_TX_POINTERS_TIMING_SEQUENCE_PARAM1 4. 40 P_TX_JITTER_PARAM1 CTS 850 Cross-Reference listing Remote Commands 3 ** P_TX_JITTER_PARAM1_NO_OPTION 5. 38 P_TX_APS_COMMANDS_PARAM1 6. 54 P_TX_TRANSPORT_OVERHEAD_PARAM1 7. 41 P_TX_PATH_OVERHEAD_PARAM1 42 P_TX_PATH_OVERHEAD_V5_PARAM1 43 P_TX_PATH_OVERHEAD_VC12_PARAM1 44 P_TX_PATH_OVERHEAD_VC3_PARAM1 ========================================= ----P_TX_SDH_MAJOR_MENU1---- TRANS 64k T DEFEC POINT JITTE APS -more SETTI SETTI ANOMA & TIM WANDE COMMA 1 of ---------------------- Button Page 1. 49 P_TX_SDH_SETTINGS_PARAM1 50 P_TX_SDH_SETTINGS_TRIB_PARAM1 52 P_TX_SETTINGS_THROUGH_MODE_PARAM1 53 P_TX_SETTINGS_TRIB_PARAM1 2. 48 P_TX_SDH_K64_SETTINGS_PARAM1 3. 39 P_TX_ERRORS_ALARMS_PARAM1 4. 45 P_TX_POINTERS_TIMING_FREQUENCY_PARAM1 46 P_TX_POINTERS_TIMING_PARAM1 47 P_TX_POINTERS_TIMING_SEQUENCE_PARAM1 5. 40 P_TX_JITTER_PARAM1 ** P_TX_JITTER_PARAM1_NO_OPTION 6. 38 P_TX_APS_COMMANDS_PARAM1 ========================================= ----P_TX_SDH_MAJOR_MENU2---- TRANS SECTI PATH TRACE SIGNA OVERH -more SETTI OVERH OVERH SETTI LABEL PRBS 2 of ---------------------- Button Page 1. 49 P_TX_SDH_SETTINGS_PARAM1 50 P_TX_SDH_SETTINGS_TRIB_PARAM1 52 P_TX_SETTINGS_THROUGH_MODE_PARAM1 53 P_TX_SETTINGS_TRIB_PARAM1 2. 54 P_TX_TRANSPORT_OVERHEAD_PARAM1 3. 41 P_TX_PATH_OVERHEAD_PARAM1 42 P_TX_PATH_OVERHEAD_V5_PARAM1 43 P_TX_PATH_OVERHEAD_VC12_PARAM1 44 P_TX_PATH_OVERHEAD_VC3_PARAM1 4. 37 P_TRACE_SETTINGS_PARAM1 5. 24 P_SIGNAL_LABELS_PARAM1 6. 1 P_OVERHEAD_PRBS_TEST_PARAM1 ========================================= ----P_UTILITY_MAJOR_MENU---- MISC PRINT REMOT INSTR SELF JITTE SETTI SETUP CONTR CONFI TEST CAL ---------------------- Button Page 1. 58 P_UTILITY_MISC_SETTINGS_PARAM1 2. 59 P_UTILITY_PRINTER_SETUP_PARAM1 3. 60 P_UTILITY_REMOTE_CONTROL_PARAM1 4. 57 P_UTILITY_INSTRUMENT_CONFIG_PARAM1 5. 61 P_UTILITY_SELF_TEST_PARAM1 6. 55 P_UTILITY_CALIBRATION_PARAM1 ** P_UTILITY_CALIBRATION_M45_PARAM1 ========================================= CTS 850 Cross-Reference listing Remote Commands 4 1. ----P_OVERHEAD_PRBS_TEST_PARAM1---- Tx Overhead PRBS Test ...... None 2^15-1 Normal Rx Overhead PRBS Test ...... None 2^15-1 Normal Pattern Lock ... Unlocked Errors ... BER ... ---------------------- Item OVERHEAD_TEST_SELECT_TX_BYTE ("Tx Overhead PRBS Test ...") :source:data:telecom:overhead:prbs Item OVERHEAD_TEST_SELECT_TX_PATTERN ("Tx Overhead PRBS Test ...") :source:data:telecom:overhead:prbs Item OVERHEAD_TEST_SELECT_TX_INVERT ("Tx Overhead PRBS Test ...") :source:data:telecom:overhead:prbs Item OVERHEAD_TEST_SELECT_RX_BYTE ("Rx Overhead PRBS Test ...") :sense:data:telecom:overhead:prbs Item OVERHEAD_TEST_SELECT_RX_PATTERN ("Rx Overhead PRBS Test ...") :sense:data:telecom:overhead:prbs Item OVERHEAD_TEST_SELECT_RX_INVERT ("Rx Overhead PRBS Test ...") :sense:data:telecom:overhead:prbs ============================================= CTS 850 Cross-Reference listing Remote Commands 5 2. ----P_PERFORMANCE_ANALYSIS_G826_PARAM1---- Analysis Type .............. G.826 SDH Allocation ............. PDH Allocation ............. Include UAS ................ No Limit .. Current Results Near End Far End Near End Far End RS PASS 140 PASS PASS MS PASS PASS 34 PASS PASS HP PASS PASS 8 PASS PASS LP PASS PASS 2 PASS PASS ---------------------- Item PERFORMANCE_ANALYSIS_SELECT_ANALYSIS_G826_TYPE ("Analysis Type ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_G826_SDH_ALLOCATION ("SDH Allocation ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_G826_PDH_ALLOCATION ("PDH Allocation ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_G826_UAS_ENABLE ("Include UAS ...") :sense:data:telecom:measure:analysis:g826:uaseconds:enable Item SENSE_DATA_MEASURE_ANALYSIS_G826_UAS_LIMIT ("Limit ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 6 3. ----P_PERFORMANCE_ANALYSIS_M2101_PARAM1---- Analysis Type .............. M.2101.1 Test Type .................. BIS Allocation ................. Include UAS ................ No Limit .. APO Multiplier ............. Section ES . SES .. Path ES . SES .. Current Results Acceptable Near End Far End RS ACCEPTABLE MS ACCEPTABLE ACCEPTABLE HP ACCEPTABLE ACCEPTABLE LP ACCEPTABLE ACCEPTABLE ---------------------- Item PERFORMANCE_ANALYSIS_SELECT_ANALYSIS_M2101_TYPE ("Analysis Type ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_M2101_TEST_TYPE ("Test Type ...") :sense:data:telecom:measure:analysis:m2101:test:type Item SENSE_DATA_MEASURE_ANALYSIS_M2101_ALLOCATION_HIF ("Allocation ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_M2101_UAS_ENABLE ("Include UAS ...") :sense:data:telecom:measure:analysis:m2101:uaseconds:enable Item SENSE_DATA_MEASURE_ANALYSIS_M2101_UAS_LIMIT_HIF ("Limit ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_M2101_SECTION_ES_APOM_HIF ("ES ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_M2101_SECTION_SES_APOM_HIF ("SES ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_M2101_PATH_ES_APOM_HIF ("ES ...") (No commands found) Item SENSE_DATA_MEASURE_ANALYSIS_M2101_PATH_SES_APOM_HIF ("SES ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 7 4. ----P_RESULTS_ANALYSIS_SDH_G826_B1BIP---- Section Analysis (B1 BIP) Near End B1-BIP B2-BIP B3-BIP TU-BIP Far End MS-REI HP-REI LP-REI B1-BIP Analysis COUNT RATIO Errored Blocks Errored Seconds Background Block Errors Severely Errored Seconds Consecutive SES Periods Unavailable Seconds Analysis PASS ---------------------- Item ..._B1BIP (No commands found) Item ..._B2BIP (No commands found) Item ..._MSREI (No commands found) Item ..._B3BIP (No commands found) Item ..._HPREI (No commands found) Item ..._TUBIP (No commands found) Item ..._LPREI (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 8 5. ----P_RESULTS_ANALYSIS_SDH_M2101_B1BIP---- Section Analysis (B1 BIP) Near End B1-BIP B2-BIP B3-BIP TU-BIP Far End MS-REI HP-REI LP-REI B1-BIP Analysis (per G.829) COUNT RATIO Errored Blocks Errored Seconds Background Block Errors Severely Errored Seconds Consecutive SES Periods Unavailable Seconds Analysis ACCEPTABLE ---------------------- Item ..._B1BIP (No commands found) Item ..._B2BIP (No commands found) Item ..._MSREI (No commands found) Item ..._B3BIP (No commands found) Item ..._HPREI (No commands found) Item ..._TUBIP (No commands found) Item ..._LPREI (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 9 6. ----P_RESULTS_RECALL_RESULTS_PARAM1---- Memory Start Time Durati Current 00:00:00 01-Jan-00 Running...r> Disk Description < ---------------------- Item RESULTS0_NAME (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 10 7. ----P_RESULTS_SAVE_RESULTS_PARAM1---- The results of the last test are stored in memory. For a permanent record, they must be saved to disk. Name ....................... Description ................ Save To Disk ........... Select Action Memory Start Time/Date Duration Current 00:00:00 01-Jan-00 Running... ---------------------- Item ..._NAME ("Name ...") (No commands found) Item SENSE_DATA_MEASURE_INFORMATION_DESCRIPTION ("Description ...") (No commands found) Item ..._SAVE_DISK ("\011 Save To Disk ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 11 8. ----P_RX_ANALYSIS_CONFIGURATION_SETTINGS_PARAM1---- FAS Error Threshold ..................... Pointer ss-Bit Mismatch Action .......... Loss of Pointer Trace Mismatch Detection ................ Disabled HP Unequipped Detection ................. Disabled LP Unequipped Detection ................. Disabled HP Signal Label Mismatch Detection.. Disabled LP Signal Label Mismatch Detection... Disabled Severely Errored Second CRC Error Threshold .................... 300 Rx Error Trigger Output ................. None ---------------------- Item ..._FAS_THRESHOLD ("FAS Error Threshold ...") (No commands found) Item ..._POINTER_MISMATCH ("Pointer ss-Bit Mismatch Action ...") :sense:data:telecom:measure:config:pointer:mismatch Item ..._TRACE_MISMATCH ("Trace Mismatch Detection ...") :sense:data:telecom:measure:config:trace:mismatch Item SENSE_DATA_POVERHEAD_HPUNEQUIPPED ("HP Unequipped Detection ...") :sense:data:telecom:poverhead:hpunequipped Item SENSE_DATA_POVERHEAD_LPUNEQUIPPED ("LP Unequipped Detection ...") :sense:data:telecom:poverhead:lpunequipped Item SENSE_DATA_POVERHEAD_HPPLM ("HP Signal Label Mismatch Detection..") :sense:data:telecom:poverhead:hpplm Item SENSE_DATA_POVERHEAD_LPPLM ("LP Signal Label Mismatch Detection...") :sense:data:telecom:poverhead:lpplm Item ..._SES_THRESHOLD ("CRC Error Threshold ...") :sense:data:telecom:measure:tributary:analysis:g826:threshold:m2:seseconds :sense:data:telecom:measure:tributary:analysis:g826:threshold:m45:seseconds Item ..._ERROR_TRIGGER ("Rx Error Trigger Output ...") :sense:data:telecom:erroutput:source ============================================= CTS 850 Cross-Reference listing Remote Commands 12 9. ----P_RX_CAS_VOICE_SETTINGS_PARAM1---- CAS Display Mode............ Single Selected Timeslot........... Speaker..................... Off TS abcd CAS Bit Values.............. ---------------------- Item ..._CAS_MODE ("CAS Display Mode...") :sense:data:telecom:cas:mode Item ..._TIMESLOT ("Selected Timeslot...") (No commands found) Item ..._VOLUME ("Speaker...") :sense:data:telecom:tributary:k64:speaker ============================================= CTS 850 Cross-Reference listing Remote Commands 13 10. ----P_RX_CAS_VOICE_SETTINGS_PARAM2---- CAS Display Mode............ Single TS abcd TS abcd TS abcd TS abcd 1 9 17 25 2 10 18 26 3 11 19 27 4 12 20 28 5 13 21 29 6 14 22 30 7 15 23 31 8 16 ---- 24 ---------------------- Item ..._CAS_MODE ("CAS Display Mode...") :sense:data:telecom:cas:mode ============================================= CTS 850 Cross-Reference listing Remote Commands 14 11. ----P_RX_JITTER_WANDER_PARAM1---- Jitter Mode ................ Peak-Peak Jitter Input Source ........ Line Jitter Input Clock Rate .... 52MHz (STM-0) Jitter Range ............... Normal (6UI) Jitter Measurement Filter .. Wideband (100Hz - 400kHz) Fullband Highpass .......... 10.0Hz Jitter Hit Threshold ....... Pointer Hit Threshold ...... ---------------------- Item RX_JITTER_WANDER_MODE ("Jitter Mode ...") :sense:data:telecom:jitter:mode Item RX_JITTER_WANDER_SOURCE ("Jitter Input Source ...") :sense:data:telecom:jitter:source Item RX_JITTER_WANDER_CLOCK_RATE ("Jitter Input Clock Rate ...") :sense:data:telecom:jitter:clock:rate Item RX_JITTER_WANDER_RANGE ("Jitter Range ...") :sense:data:telecom:jitter:range Item RX_JITTER_WANDER_FILTER_TYPE ("Jitter Measurement Filter ...") :diagnostic:select :sense:data:telecom:jitter:filter:highband :sense:data:telecom:jitter:filter:type Item RX_JITTER_WANDER_FILTER_SUBBAND_HPASS ("Fullband Highpass ...") :sense:data:telecom:jitter:filter:fullband:hpass Item RX_JITTER_WANDER_HIT_THRESHOLD ("Jitter Hit Threshold ...") (No commands found) Item RX_JITTER_WANDER_PTR_EVENT_THRESHOLD ("Pointer Hit Threshold ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 15 12. ----P_RX_PATH_OVERHEAD_PARAM1---- Overhead View .............. STS Path Overhead External Drop .............. None Pause Control .............. Updates Active C2 Signal Label ............ (Undefined) J1 HP Trace Format ......... 64-byte Path Overhead Path Trace Message J1: C2: G1: F2: H4: Z3: Z4: Z5: ---------------------- Item ..._DISPLAY ("Overhead View ...") (No commands found) Item ..._EXTERNAL_DROP ("External Drop ...") :sense:data:telecom:overhead:drop :sense:data:telecom:poverhead:drop Item RX_PATH_OVERHEAD_CONTROL ("Pause Control ...") :initiate Item RX_PATH_OVERHEAD_J1_TRACE_FORMAT ("J1 HP Trace Format ...") :sense:data:telecom:poverhead:trace:format ============================================= CTS 850 Cross-Reference listing Remote Commands 16 13. ----P_RX_PATH_OVERHEAD_V5_PARAM1---- Receiving STS-1 with STS-1 : 1 under test Overhead View .............. STS Path Overhead Pause Control .............. Updates Active Overhead V5: ---------------------- Item RX_PATH_OVERHEAD_SELECT_V5 (No commands found) Item RX_PATH_OVERHEAD_V5_CONTROL ("Pause Control ...") :initiate ============================================= CTS 850 Cross-Reference listing Remote Commands 17 14. ----P_RX_PATH_OVERHEAD_VC12_PARAM1---- Overhead View .............. STS Path Overhead Pause Control .............. Updates Active V5 Signal Label ............ (Unequipped) Path Overhead Path Trace Message V5: J2: K4: ---------------------- Item RX_PATH_OVERHEAD_SELECT_VC12 ("Overhead View ...") (No commands found) Item RX_PATH_OVERHEAD_VC12_CONTROL ("Pause Control ...") :initiate ============================================= CTS 850 Cross-Reference listing Remote Commands 18 15. ----P_RX_PATH_OVERHEAD_VC3_PARAM1---- Overhead View .............. STS Path Overhead Pause Control .............. Updates Active C2 Signal Label ............ Path Overhead Path Trace Message J1: C2: G1: F2: H4: Z3: Z4: Z5: ---------------------- Item RX_PATH_OVERHEAD_SELECT_VC3 ("Overhead View ...") (No commands found) Item RX_PATH_OVERHEAD_VC3_CONTROL ("Pause Control ...") :initiate ============================================= CTS 850 Cross-Reference listing Remote Commands 19 16. ----P_RX_SDH_K64_SETTINGS_PARAM1---- 2 Mb/s Framing.............. Framed Configuration............... N x 64k Number of Timeslots......... Starting Timeslot........... Test Pattern................ 2^23-1 Normal (ITU) Active Timeslots << < << < << < < < < << < << < << < << < < << << < < < 1 5 10 15 20 25 30 ---------------------- Item ..._FRAMING ("2 Mb/s Framing...") :sense:data:telecom:tributary:framing Item ..._CONFIGURATION ("Configuration...") (No commands found) Item ..._WIDTH ("Number of Timeslots...") (No commands found) Item ..._TIMESLOT ("Starting Timeslot...") (No commands found) Item ..._TEST_PATTERN ("Test Pattern...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item ..._TEST_PATTERN_POLARITY ("Test Pattern...") :sense:data:telecom:payload:prbs:invert Item ..._UBYTE ("Test Pattern...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern ============================================= CTS 850 Cross-Reference listing Remote Commands 20 17. ----P_RX_SDH_SETTINGS_PARAM1---- Receive Rate ............... STM-4 Optical Receive Level .............. Cross Connect AU Under Test .............. 1 SDH Structure .............. AU-4 Bulk TU Under Test .............. :1 (Group 1, TUG-2:1 TU-12:1 Payload Structure .......... 140 Mb/suipped)Framed Test Pattern ............. 2^23-1 Normal (ITU) 34Mb/s Active Channel..... 1 8Mb/s Active Channel..... 1 2Mb/s Active Channel..... 1 Payload Drop................ Drop DS1 (AMI) Tx/Rx Setup................. Independent ---------------------- Item ..._RATE ("Receive Rate ...") :input1:telecom:rate :input1:telecom:type :input3:telecom:rate :sense:data:telecom:source Item ..._QUALIFIER ("Receive Rate ...") :input1:telecom:type Item ..._LEVEL ("Receive Level ...") :input1:telecom:level Item ..._AU ("AU Under Test ...") (No commands found) Item ..._STRUCTURE ("SDH Structure ...") :sense:data:telecom:payload:mapping :sense:data:telecom:structure :sense:data:telecom:tributary:mapping Item ..._TU_GROUP ("TU Under Test ...") (No commands found) Item ..._TU2 ("TU Under Test ...") (No commands found) Item ..._TU12 ("TU Under Test ...") (No commands found) Item ..._BULK_PAYLOAD ("Payload Structure ...") :sense:data:telecom:payload:mapping Item ..._TU_PAYLOAD ("Payload Structure ...") :sense:data:telecom:tributary:payload Item ..._TU_PAYLOAD_FRAMING ("Payload Structure ...") :sense:data:telecom:tributary:framing Item ..._TEST_PATTERN ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item ..._TEST_PATTERN_POLARITY ("Test Pattern ...") :sense:data:telecom:payload:prbs:invert Item ..._UBYTE ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item ..._M34_CHANNEL ("34Mb/s Active Channel...") :sense:data:telecom:tributary:dmx34:channel Item ..._M8_CHANNEL ("8Mb/s Active Channel...") :sense:data:telecom:tributary:dmx8:channel Item ..._M2_CHANNEL ("2Mb/s Active Channel...") :sense:data:telecom:tributary:dmx2:channel Item ..._PAYLOAD_DROP ("Payload Drop...") :output2:telecom:code :output3:telecom:code :sense:data:telecom:tributary:drop Item ..._TX_RX ("Tx/Rx Setup...") :instrument:coupling CTS 850 Cross-Reference listing Remote Commands 21 :source:data:telecom:source ============================================= CTS 850 Cross-Reference listing Remote Commands 22 18. ----P_RX_SDH_SETTINGS_TRIB_PARAM1---- Receive Rate ............... STM-4 Balanced Receive Level............... Normal (Cross Connect) Payload Structure .......... 140 Mb/s Framed Test Pattern ............. 2^23-1 Normal (ITU) 34Mb/s Active Channel..... 1 8Mb/s Active Channel..... 1 2Mb/s Active Channel..... 1 Payload Drop................ Drop DS1 (AMI) Tx/Rx Setup................. Independent ---------------------- Item ..._RATE ("Receive Rate ...") :input1:telecom:rate :input1:telecom:type :input3:telecom:rate :sense:data:telecom:source Item ..._QUALIFIER ("Receive Rate ...") :input2:telecom:code :input2:telecom:terminator :input3:telecom:code Item ..._LEVEL ("Receive Level...") :input2:telecom:level :input3:telecom:level Item ..._PAYLOAD ("Payload Structure ...") :sense:data:telecom:tributary:payload Item ..._PAYLOAD_FRAMING ("Payload Structure ...") :sense:data:telecom:tributary:framing Item ..._TEST_PATTERN ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item ..._TEST_PATTERN_POLARITY ("Test Pattern ...") :sense:data:telecom:payload:prbs:invert Item ..._UBYTE ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item ..._M34_CHANNEL ("34Mb/s Active Channel...") :sense:data:telecom:tributary:dmx34:channel Item ..._M8_CHANNEL ("8Mb/s Active Channel...") :sense:data:telecom:tributary:dmx8:channel Item ..._M2_CHANNEL ("2Mb/s Active Channel...") :sense:data:telecom:tributary:dmx2:channel Item ..._PAYLOAD_DROP ("Payload Drop...") :output2:telecom:code :output3:telecom:code :sense:data:telecom:tributary:drop Item ..._TX_RX ("Tx/Rx Setup...") :instrument:coupling :source:data:telecom:source ============================================= CTS 850 Cross-Reference listing Remote Commands 23 19. ----P_RX_SETTINGS_PARAM1---- Receive Rate ............... STS-1 Receive Level .............. Cross Connect Signal Structure ........... STS-1 STS Under Test ............. 1 Mapping .................... Bulk Fill (Equipped) DS3 Framing ................ DS3 C-bit 1, VT 1) TU-12:1 DS1 Under Test ............. DS1 1nframed DS1 Framing ................ DS1 Unframed Tributary Drop ............. Drop DS1 (AMI) Test Pattern ............... 2^23-1 Tx/Rx Settings ............. Independent ---------------------- Item ..._RATE ("Receive Rate ...") :input1:telecom:rate :input1:telecom:type :input2:telecom:terminator :input3:telecom:rate :sense:data:telecom:source Item ..._LEVEL ("Receive Level ...") :input1:telecom:level Item ..._SIGNAL_STRUCTURE ("Signal Structure ...") :sense:data:telecom:structure Item ..._SPE ("STS Under Test ...") (No commands found) Item ..._SPE_MAPPING ("Mapping ...") :sense:data:telecom:payload:mapping :sense:data:telecom:tributary:mapping Item ..._VT_GROUP ("DS3 Framing ...") (No commands found) Item ..._TU_TU12_CHANNEL ("DS3 Framing ...") (No commands found) Item ..._VT_FRAMING ("DS1 Under Test ...") :sense:data:telecom:tributary:framing Item ..._DEMAP_FRAMING ("DS3 Framing ...") :sense:data:telecom:tributary:framing Item ..._DEMUX_CHAN_READOUT ("DS1 Under Test ...") (No commands found) Item SENSE_DATA_TRIBUTARY_DEMUX_FRAMING ("DS1 Framing ...") :sense:data:telecom:tributary:demultiplex:framing Item ..._TRIBUTARY_DROP ("Tributary Drop ...") :output2:telecom:code :output3:telecom:code :sense:data:telecom:tributary:drop Item ..._TEST_PATTERN ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item ..._UBYTE ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item ..._TX_RX ("Tx/Rx Settings ...") :instrument:coupling :source:data:telecom:source ============================================= CTS 850 Cross-Reference listing Remote Commands 24 20. ----P_RX_SETTINGS_TRIB_PARAM1---- Receive Rate ............... STS-1 Receive Level .............. Normal (Cross Connect) DS3 Framing ................ DS3 C-bitmed DS1 Under Test ............. DS1 1 DS1 Framing ................ DS1 Unframed Test Pattern ............... 2^23-1 Tx/Rx Settings ............. Independent ---------------------- Item RX_SETTINGS_SELECT_TRIB_RATE ("Receive Rate ...") :input1:telecom:rate :input1:telecom:type :input2:telecom:terminator :input3:telecom:rate :sense:data:telecom:source Item RX_SETTINGS_SELECT_TRIBUTARY_LEVEL ("Receive Level ...") :input2:telecom:level :input3:telecom:level Item RX_SETTINGS_SELECT_TRIBUTARY_FRAMING ("Framing ...") :sense:data:telecom:tributary:framing Item RX_SETTINGS_SELECT_TRIBUTARY_DEMAP_FRAMING ("Framing ...") :sense:data:telecom:tributary:framing Item RX_SETTINGS_SELECT_TRIBUTARY_DEMUX_CHAN_READOUT ("DS1 Under Test ...") (No commands found) Item RX_SETTINGS_SELECT_TRIBUTARY_DEMUX_FRAMING ("DS1 Framing ...") :sense:data:telecom:tributary:demultiplex:framing Item RX_SETTINGS_SELECT_TRIB_TEST_PATTERN ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item RX_SETTINGS_SELECT_TRIB_UBYTE ("Test Pattern ...") :sense:data:telecom:payload:pattern :sense:data:telecom:tributary:pattern Item RX_SETTINGS_SELECT_TRIB_TX_RX ("Tx/Rx Settings ...") :instrument:coupling :source:data:telecom:source ============================================= CTS 850 Cross-Reference listing Remote Commands 25 21. ----P_RX_SET_BYTE_TRACE_PARAM1---- ---------------------- ============================================= CTS 850 Cross-Reference listing Remote Commands 26 22. ----P_RX_TRANSPORT_OVERHEAD_PARAM1---- Showing Overhead for ....... STS-1 :1 External Drop .............. None Pause Control .............. Updates Active J0 RS Trace ................ Tek CTS 850 S1 Sync. Status Message .... Column ? Column ? Column ? A1: A2: J0: B1: E1: F1: D1: D2: D3: H1: H2: H3: B2: K1: K2: D4: D5: D6: D7: D8: D9: D10: D11: D12: S1: Z2: E2: ---------------------- Item ..._COLUMNS_HIF ("Showing Overhead for ...") (No commands found) Item ..._EXTERNAL_DROP ("External Drop ...") :sense:data:telecom:overhead:drop :sense:data:telecom:poverhead:drop Item RX_TRANSPORT_OVERHEAD_CONTROL ("Pause Control ...") :initiate Item RX_TRANSPORT_OVERHEAD_TRACE_J0 ("J0 RS Trace ...") :sense:data:telecom:section:trace:mode ============================================= CTS 850 Cross-Reference listing Remote Commands 27 23. ----P_RX_VIEW_BYTE_TRACE_PARAM1---- ---------------------- ============================================= CTS 850 Cross-Reference listing Remote Commands 28 24. ----P_SIGNAL_LABELS_PARAM1---- C2 HP-Signal Label Measurement: Disabled Expected ...... Rx ............ (Undefined) Tx ............ C2 LP-Signal Label Measurement: Disabled Expected ...... Rx............. Tx............. V5 LP-Signal Label Measurement: Disabled Expected ...... 000 (Unequipped) Rx............. ---------------------- Item TX_SIGNAL_LABELS_C2_HP_EXPECTED_VALUE ("Expected ...") (No commands found) Item TX_SIGNAL_LABELS_C2_LP_EXPECTED_VALUE ("Expected ...") (No commands found) Item TX_SIGNAL_LABELS_V5_LP_EXPECTED_VALUE ("Expected ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 29 25. ----P_TEST_JITTER_OUTPUT_PARAM1---- Test Type .................. Output Jitter Test Control ............... Edit Setup Test Duration .............. 1 min 0 sec No Data Measured Max Allowed Filter Jitter (G.823) Wideband Highband Press START/STOP to Begin Jitter Transfer Test ---------------------- Item ..._TYPE ("Test Type ...") :sense:data:telecom:test:jitter:type Item ..._CONTROL ("Test Control ...") :sense:data:telecom:test:jitter:tolerance:alldata Item ..._DURATION ("Test Duration ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 30 26. ----P_TEST_JITTER_POINTER_PARAM1---- Test Type .................. Output Jitter Test Control ............... Edit Setup Sequence Type (G.783) ...... a) Single Alternating No Data Measured Max Allowed Filter Jitter (G.783) Wideband Highband (Go to Transmit POINTERS & TIMING to setup sequence) Press START/STOP to Begin Jitter Transfer Test ---------------------- Item ..._TYPE ("Test Type ...") :sense:data:telecom:test:jitter:type Item ..._CONTROL ("Test Control ...") :sense:data:telecom:test:jitter:tolerance:alldata Item SENSE_DATA_TEST_JITTER_POINTER_SEQUENCE_TYPE ("Sequence Type (G.783) ...") :sense:data:telecom:test:jitter:pointer:sequence:type ============================================= CTS 850 Cross-Reference listing Remote Commands 31 27. ----P_TEST_JITTER_RECALL_RESULTS---- Test Type .................. Output Jitter Test Control ............... Edit Setup Choose Test ................ Select Action Disk Description < ---------------------- Item TEST_SETUP_JITTER_RECALL_RESULTS_TYPE ("Test Type ...") :sense:data:telecom:test:jitter:type Item TEST_SETUP_JITTER_RECALL_RESULTS ("Test Control ...") :sense:data:telecom:test:jitter:tolerance:alldata Item TEST_JITTER_CHOOSE_TEST ("Choose Test ...") (No commands found) Item JITTER_RESULTS0_FILENAME (No commands found) Item JITTER_RESULTS1_FILENAME (No commands found) Item JITTER_RESULTS2_FILENAME (No commands found) Item JITTER_RESULTS3_FILENAME (No commands found) Item JITTER_RESULTS4_FILENAME (No commands found) Item JITTER_RESULTS5_FILENAME (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 32 28. ----P_TEST_JITTER_SAVE_RESULTS---- Test Type .................. Output Jitter Test Control ............... Edit Setup File Name .................. Description ................ Disk Operation ............. Select Action ---------------------- Item TEST_SETUP_JITTER_SAVE_RESULTS_TYPE ("Test Type ...") :sense:data:telecom:test:jitter:type Item TEST_SETUP_JITTER_SAVE_RESULTS ("Test Control ...") :sense:data:telecom:test:jitter:tolerance:alldata Item TEST_JITTER_SAVE_RESULTS_NAME ("File Name ...") (No commands found) Item TEST_JITTER_SAVE_RESULTS_DESCRIPTION ("Description ...") (No commands found) Item TEST_JITTER_SAVE_RESULTS_DISK ("Disk Operation ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 33 29. ----P_TEST_JITTER_SPECTRUM_PARAM1---- Test Type .................. Output Jitter Test Control ............... Edit Setup Frequency Range ............ Spectral 0.1Hz - 1kHz Press START/STOP to Begin Jitter Transfer Test ---------------------- Item ..._TYPE ("Test Type ...") :sense:data:telecom:test:jitter:type Item ..._CONTROL ("Test Control ...") :sense:data:telecom:test:jitter:tolerance:alldata Item SENSE_DATA_TEST_JITTER_SPECTRUM_RANGE ("Frequency Range ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 34 30. ----P_TEST_JITTER_TOLERANCE_PARAM1---- Test Type .................. Output Jitter Test Control ............... Edit Setup Mask Type .................. G.825 Start Frequency ............ End Frequency .............. Number Freq Samples ........ Tolerance Criteria ......... Onset Of Errors Method Record Error Threshold ..... SELECT ACTION Recommended BER (O.171) > Current BER (Threshold) In Progress... Press START/STOP to Begin Jitter Transfer Test ---------------------- Item SENSE_DATA_TEST_JITTER_TYPE ("Test Type ...") :sense:data:telecom:test:jitter:type Item SENSE_DATA_TEST_JITTER_CONTROL ("Test Control ...") :sense:data:telecom:test:jitter:tolerance:alldata Item SENSE_DATA_TEST_JITTER_TOLERANCE_MASK ("Mask Type ...") :sense:data:telecom:test:jitter:tolerance:mask Item SENSE_DATA_TEST_JITTER_TOLERANCE_FREQUENCY_START ("Start Frequency ...") (No commands found) Item SENSE_DATA_TEST_JITTER_TOLERANCE_FREQUENCY_END ("End Frequency ...") (No commands found) Item SENSE_DATA_TEST_JITTER_TOLERANCE_SAMPLES ("Number Freq Samples ...") (No commands found) Item SENSE_DATA_TEST_JITTER_TOLERANCE_METHOD ("Tolerance Criteria ...") :sense:data:telecom:test:jitter:tolerance:method Item SENSE_DATA_TEST_JITTER_TOLERANCE_MEASURE ("Record Error Threshold ...") :sense:data:telecom:test:jitter:tolerance:measure ============================================= CTS 850 Cross-Reference listing Remote Commands 35 31. ----P_TEST_JITTER_TRANSFER_PARAM1---- Test Type .................. Output Jitter Test Control ............... Edit Setup Mask Type .................. GR-253 Start Frequency ............ End Frequency .............. Number Freq Samples ........ Action ..................... Perform Jitter Transfer The calibration is performed to establish a 0dB amplitude reference trace of the CTS (using an internal loopback). Calibration Status: Unsupported Settings Press START/STOP to Begin Jitter Transfer Test ---------------------- Item ..._TYPE ("Test Type ...") :sense:data:telecom:test:jitter:type Item ..._CONTROL ("Test Control ...") :sense:data:telecom:test:jitter:tolerance:alldata Item SENSE_DATA_TEST_JITTER_TRANSFER_MASK ("Mask Type ...") :sense:data:telecom:test:jitter:transfer:mask Item SENSE_DATA_TEST_JITTER_TRANSFER_FREQUENCY_START ("Start Frequency ...") (No commands found) Item SENSE_DATA_TEST_JITTER_TRANSFER_FREQUENCY_END ("End Frequency ...") (No commands found) Item SENSE_DATA_TEST_JITTER_TRANSFER_SAMPLES ("Number Freq Samples ...") (No commands found) Item SENSE_DATA_TEST_JITTER_TRANSFER_STATE ("Action ...") :sense:data:telecom:test:jitter:transfer:state ============================================= CTS 850 Cross-Reference listing Remote Commands 36 32. ----P_TEST_SETUP_RECALL_INSTRUMENT_SETUPS_PARAM1---- Memory Description 0. DEFAULT FACTORY SETTINGS 1. EMPTY 2. EMPTY 3. EMPTY 4. EMPTY 5. EMPTY Disk Description < ---------------------- Item INSTRUMENT_SETUP0_NAME ("0.") (No commands found) Item INSTRUMENT_SETUP1_NAME ("1.") (No commands found) Item INSTRUMENT_SETUP2_NAME ("2.") (No commands found) Item INSTRUMENT_SETUP3_NAME ("3.") (No commands found) Item INSTRUMENT_SETUP4_NAME ("4.") (No commands found) Item INSTRUMENT_SETUP5_NAME ("5.") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 37 33. ----P_TEST_SETUP_RECALL_PASS_FAIL_TESTS_PARAM1---- Disk Description < ---------------------- Item PASS_FAIL_TEST0_NAME (No commands found) Item PASS_FAIL_TEST1_NAME (No commands found) Item PASS_FAIL_TEST2_NAME (No commands found) Item PASS_FAIL_TEST3_NAME (No commands found) Item PASS_FAIL_TEST4_NAME (No commands found) Item PASS_FAIL_TEST5_NAME (No commands found) Item PASS_FAIL_TEST6_NAME (No commands found) Item PASS_FAIL_TEST7_NAME (No commands found) Item PASS_FAIL_TEST8_NAME (No commands found) Item PASS_FAIL_TEST9_NAME (No commands found) Item PASS_FAIL_TEST10_NAME (No commands found) Item PASS_FAIL_TEST11_NAME (No commands found) Item PASS_FAIL_TEST12_NAME (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 38 34. ----P_TEST_SETUP_SAVE_INSTRUMENT_SETUPS_PARAM1---- Set up the instrument as required. Then fill out the parameters below and save to disk or memory. Name ....................... Description ................ Save to Memory ......... Select Action Save to Disk ........... Select Action ---------------------- Item ..._NAME ("Name ...") (No commands found) Item SYSTEM_DESCRIPTION ("Description ...") (No commands found) Item ..._SAVE_MEM ("\012 Save to Memory ...") (No commands found) Item ..._SAVE_DISK ("\011 Save to Disk ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 39 35. ----P_TEST_SETUP_SAVE_PASS_FAIL_TESTS_PARAM1---- Set up the instrument as required. Then fill out the parameters below and save your test to disk. Name ....................... Description ................ Operator Start Prompt ...... Test Duration .............. Fail If Operator End Prompt ........ On Test Completion ......... Do Nothing Save to Disk ........... Select Action ---------------------- Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_NAME ("Name ...") (No commands found) Item SENSE_DATA_MEASURE_STESTS_DESCRIPTION ("Description ...") (No commands found) Item SENSE_DATA_MEASURE_STESTS_START_PROMPT ("Operator Start Prompt ...") (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_DURATION ("Test Duration ...") (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_CLASS1 :sense:data:telecom:measure:stests:threshold Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_TYPE1 (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_THRESHOLD1 (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_CLASS2 :sense:data:telecom:measure:stests:threshold Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_TYPE2 (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_THRESHOLD2 (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_CLASS3 :sense:data:telecom:measure:stests:threshold Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_TYPE3 (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_THRESHOLD3 (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_CLASS4 :sense:data:telecom:measure:stests:threshold Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_TYPE4 (No commands found) Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_EVAL_THRESHOLD4 (No commands found) Item SENSE_DATA_MEASURE_STESTS_END_PROMPT ("Operator End Prompt ...") (No commands found) Item SENSE_DATA_MEASURE_STESTS_ON_COMPLETE ("On Test Completion ...") :sense:data:telecom:measure:stests:done Item TEST_SETUP_SAVE_PASS_FAIL_TESTS_DISK_ACTION ("\011 Save to Disk ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 40 36. ----P_TEST_SETUP_TEST_CONTROL_PARAM1---- Test Duration .............. History Resolution ......... Normal (1 min samples) At 1 minute resolution the maximum history length is at least 5 days. Upon reaching the 5 day limit new data will begin overwriting the old data. ---------------------- Item UTILITY_TEST_DURATION ("Test Duration ...") (No commands found) Item ..._HIST_RES ("History Resolution ...") :sense:data:telecom:test:history:resolution ============================================= CTS 850 Cross-Reference listing Remote Commands 41 37. ----P_TRACE_SETTINGS_PARAM1---- Trace Select ... RS Trace (J0) Measurement: Disabled Expected ..... Rx ........... Tx ........... ---------------------- Item OVERHEAD_TEST_SELECT_TRACE ("Trace Select ...") (No commands found) Item OVERHEAD_TEST_EXPECTED_TRACE_1 (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 42 38. ----P_TX_APS_COMMANDS_PARAM1---- APS Mode ................... Span Network USER SETUP TRANSMIT RECEIVE K1 Full Byte ............... Bits 1-4: Switch Request ... ? ? ? Bits 5-8: Channel Requesting ? ? ? K2 Full Byte ............... Bits 1-4: Bridged Channel .. ? ? ? Bit 5: Architecture ........ ? ? ? Bits 6-8: Status ........... ? ? ? Transmit Setup ............. Select Action ---------------------- Item SOURCE_DATA_APS_MODE ("APS Mode ...") (No commands found) Item TX_APS_K1_BYTE ("K1 Full Byte ...") (No commands found) Item TX_APS_K1_BITS_1_4 ("Bits 1-4: Switch Request ...") (No commands found) Item TX_APS_K1_BITS_5_8 ("Bits 5-8: Channel Requesting ...") (No commands found) Item TX_APS_K2_BYTE ("K2 Full Byte ...") (No commands found) Item TX_APS_K2_BITS_1_4 ("Bits 1-4: Bridged Channel ...") (No commands found) Item TX_APS_K2_BIT_5 ("Bit 5: Architecture ...") (No commands found) Item TX_APS_K2_BITS_6_8 ("Bits 6-8: Status ...") (No commands found) Item TX_APS_TRANSMIT_SETUP ("Transmit Setup ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 43 39. ----P_TX_ERRORS_ALARMS_PARAM1---- Error Type set to .......... Section B1 BIP Frame Bit Error Burst ...... Error in Frames PDH Anomaly Layer .......... 140 Mb/s Transmit Alarm set to ...... None PDH Alarm Layer ............ 140 Mb/s Transmit Failure set to .... None PDH Failure Layer .......... 140 Mb/s Press INSERT ERROR to insert a single error into the transmitted signal. ---------------------- Item ..._TYPE ("Error Type set to ...") :source:data:telecom:error:enable :source:data:telecom:error:type :source:data:telecom:tributary:error Item ..._RATE ("Error Rate set to ...") :source:data:telecom:error:enable Item ..._FAS_BURST_COUNT ("Error Rate set to ...") (No commands found) Item ..._FAS_BURST_SIZE ("Error in") (No commands found) Item ..._ERROR_LAYER ("PDH Anomaly Layer ...") :source:data:telecom:tributary:anomaly:layer Item ..._ALARM ("Transmit Alarm set to ...") :source:data:telecom:alarm :source:data:telecom:tributary:alarm Item ..._ALARM_LAYER ("PDH Alarm Layer ...") :source:data:telecom:tributary:defect:layer Item ..._FAILURE ("Transmit Failure set to ...") :source:data:telecom:failure:type :source:data:telecom:tributary:failure Item ..._FAILURE_LAYER ("PDH Failure Layer ...") :source:data:telecom:tributary:fault:layer ============================================= CTS 850 Cross-Reference listing Remote Commands 44 40. ----P_TX_JITTER_PARAM1---- Jitter/Wander Generation ... Off Jitter Output .............. Line Jitter Clock Rate .......... 52MHz (STM-0) Jitter Clock Offset ........ Jitter Frequency ........... Jitter Amplitude ........... For Jitter Generation Set Jitter Frequency > 10 Hz For Wander Generation Set Jitter Frequency < 10 Hz ---------------------- Item TX_JITTER_MODE ("Jitter/Wander Generation ...") :source:data:telecom:jitter:mode Item TX_JITTER_SOURCE ("Jitter Output ...") :source:data:telecom:jitter:source Item TX_JITTER_CLOCK_RATE ("Jitter Clock Rate ...") :source:data:telecom:jitter:clock:rate Item TX_JITTER_CLOCK_OFFSET ("Jitter Clock Offset ...") (No commands found) Item TX_JITTER_FREQUENCY ("Jitter Frequency ...") :diagnostic:select :sense:data:telecom:jitter:filter:highband :sense:data:telecom:jitter:filter:type Item TX_JITTER_AMPLITUDE ("Jitter Amplitude ...") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 45 41. ----P_TX_PATH_OVERHEAD_PARAM1---- Transmitting STS-1 : 1 under test Overhead View .............. STS Path Overhead External Add ............... None C2 Signal Label ............ H4 Multiframe Sequence ..... 4 Bytes Path Overhead Path Trace Message J1: C2: G1: F2: H4: Z3: Z4: Z5: ---------------------- Item ..._DISPLAY ("Overhead View ...") (No commands found) Item ..._EXTERNAL_ADD ("External Add ...") :source:data:telecom:overhead:insert :source:data:telecom:poverhead:insert Item TX_PATH_C2_OVERHEAD_LABEL ("C2 Signal Label ...") (No commands found) Item TX_PATH_OVERHEAD_H4_SEQUENCE ("H4 Multiframe Sequence ...") (No commands found) Item SOURCE_DATA_POVERHEAD_BYTENAME_J1 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset Item SOURCE_DATA_POVERHEAD_BYTENAME_B3 (No commands found) Item SOURCE_DATA_POVERHEAD_BYTENAME_C2 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset Item SOURCE_DATA_POVERHEAD_BYTENAME_G1 ("\014\014\014\014") (No commands found) Item SOURCE_DATA_POVERHEAD_BYTENAME_F2 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset Item SOURCE_DATA_POVERHEAD_BYTENAME_H4 (No commands found) Item SOURCE_DATA_POVERHEAD_BYTENAME_Z3 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset Item SOURCE_DATA_POVERHEAD_BYTENAME_Z4 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset Item SOURCE_DATA_POVERHEAD_BYTENAME_Z5 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset ============================================= CTS 850 Cross-Reference listing Remote Commands 46 42. ----P_TX_PATH_OVERHEAD_V5_PARAM1---- Transmitting STS-1 : 1 under test Overhead View .............. STS Path Overhead V5: ---------------------- Item TX_PATH_OVERHEAD_SELECT_V5 (No commands found) Item TX_PATH_OVERHEAD_TRIB_VT_SIG_LABEL ("\014\014\014\014") (No commands found) ============================================= CTS 850 Cross-Reference listing Remote Commands 47 43. ----P_TX_PATH_OVERHEAD_VC12_PARAM1---- Transmitting STS-1 : 1 under test Overhead View .............. STS Path Overhead V5 Signal Label ............ Path Overhead Path Trace Message V5: J2: K4: ---------------------- Item TX_PATH_OVERHEAD_SELECT_VC12 (No commands found) Item ..._V5 ("V5 Signal Label ...") (No commands found) Item TX_PATH_OVERHEAD_TRIB_TU12_SIG_LABEL (No commands found) Item TX_PATH_OVERHEAD_TRIB_VALUE_J2 (No commands found) Item TX_PATH_OVERHEAD_TRIB_VALUE_Z6 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset Item TX_PATH_OVERHEAD_TRIB_VALUE_Z7 :source:data:telecom:overhead:preset :source:data:telecom:poverhead:preset ============================================= CTS 850 Cross-Reference listing Remote Commands 48 44. ----P_TX_PATH_OVERHEAD_VC3_PARAM1---- Transmitting STS-1 : 1 under test Overhead View .............. STS Path Overhead C2 Signal Label ............ H4 Multiframe Sequence ..... 4 Bytes Path Overhead Path Trace Message J1: C2: G1: F2: H4: Z3: