Service Manuals, User Guides, Schematic Diagrams or docs for : Viewsonic Мониторы LCD Мониторы LCD Viewsonic VG712 VG712 VG712sb_SM_835_1b

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
VG712sb_SM_835_1b


>> Download VG712sb_SM_835_1b documenatation <<

Text preview - extract from the document
Service Manual
         ViewSonic VG712s/b-1
         Model No. VLCDS23719-6W/7W
                   17" Color TFT LCD Display




                                               (VG712s/b_SM_835_1b Rev. 1b Oct. 2004)

ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
   Copyright

   Copyright    2004 by ViewSonic Corporation. All rights reserved. No part of this publication may be
   reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
   computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
   manual or otherwise, without the prior written permission of ViewSonic Corporation.


   Disclaimer

   ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
   contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
   purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
   to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
   changes.


   Trademarks

   Optiquest is a registered trademark of ViewSonic Corporation.
   ViewSonic is a registered trademark of ViewSonic Corporation.
   All other trademarks used within this document are the property of their respective owners.




                                          Revision History
                                   Documents Number
   Revision   SM Editing Date                                             Description of Changes                    Editor
                                DCN Number ECR Number

     1a          06/18/04          4475                 Initial Release                                             A. Lu

                                                        Change Panel From AUO M170EN05 V.8 48.62701.003 12ms/20ms
     1b         10/18/04           4774      4626       To AUO M170EG01 V.0 48.62701.004 12ms
                                                                                                                    A. Lu




ViewSonic Corporation                                                             Confidential - Do Not Copy         VG712s/b
                                                          i
                               TABLE OF CONTENTS


        1.   Precautions and Safety Notices                                           1

        2.   Specification                                                            5

        3.   Front Panel Function Control Description                                14

        4.   Circuit Description                                                     21
        5.   Adjusting Procedure                                                     24
        6.   Trouble Shooting Flow Chart                                             49

        7.   Recommended Spare Parts List                                            53

        8.   Exploded Diagram And Spare Parts List                                   61
        9.   Block Diagram                                                           65
       10.   Schematic Diagrams                                                      66

       11.   PCB Layout Diagrams                                                     72




ViewSonic Corporation                                   Confidential - Do Not Copy        VG712s/b
                                              ii
1.   Precautions and Safety Notices



     1. Appropriate Operation


       (1)   Turn off the product before cleaning.
       (2)   Use only a dry soft cloth when cleaning the LCD panel surface.
       (3)   Use a soft cloth soaked with mild detergent to clean the display housing.
       (4)   Use only high quality and safety approved AC/DC power adapter.
       (5)   Disconnect the power plug from AC outlet if the product is not used for a long period of time.
       (6)   If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
       (7)   Do not touch the LCD panel surface with sharp or hard objects.
       (8)   Do not place heavy objects on the LCD display, video cable, or power cord.
       (9)   Do not use abrasive cleaners, waxes or solvents for your cleaning.
       (10) Do not operate the product under the following conditions:
             - Extremely hot, cold or humid environment.
             - Areas susceptible to excessive dusts and dirt.
             - Near any appliance generating a strong magnetic field.
             - Place in direct sunlight.




     2. Caution


     No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly
     familiar with all of the following safety checks and servicing guidelines.




     3. Safety Check


     Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage
     is exposed in such areas as the associated transformer circuits.




     4. Power Supply Requirements


     The external power converter for this display utilizes AC and DC cords, AC cord is detachable, but DC cord is permanently
     attached. Any attempt to replace another adapter could result in serious problems on the display.




ViewSonic Corporation                                                                Confidential - Do Not Copy          VG712s/b
                                                                 1
    5. LCD Module Handling Precautions


     5.1 Handling Precautions


      (1)   Since front polarizer is easily damaged, pay attention not to scratch it.
      (2)   Be sure to turn off power supply when inserting or disconnecting from input connector.
      (3)   Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
      (4)   When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
      (5)   Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
      (6)   Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
            handling.
      (7)   Do not open nor modify the Module Assembly.
      (8)   Do not press the reflector sheet at the back of the module to any directions.
      (9)   In case if a Module has to be put back into the packing container slot after once it was taken out from the
            container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL
            Reflector edge softly. Otherwise the TFT Module may be damaged.
      (10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
            Connector of the TFT Module.
      (11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist
            nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into
            consideration that no bending/twisting forces are applied to the TFT Module from outside.       Otherwise the
            TFT Module may be damaged.
      (12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances
            or regulations for disposal.
      (13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module
            should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950),
            or be applied exemption.
      (14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (IEC60950 or
            UL1950). Do not connect the CFL in Hazardous Voltage Circuit.




ViewSonic Corporation                                                            Confidential - Do Not Copy          VG712s/b
                                                             2
     5.2 Handling and Placing Methods



                         Correct Methods:                                          Incorrect Methods:

     Only touch the metal frame of the LCD panel or the front   Surface of the LCD panel is pressed by fingers and that
     cover of the monitor. Do not touch the surface of the      will probably cause "Mura."
     polarizer.




     Take out the monitor with cushions                         Take out the monitor by grasping the LCD panel. That
                                                                will probably cause "Mura."




ViewSonic Corporation                                                       Confidential - Do Not Copy         VG712s/b
                                                         3
     Place the monitor on a clean and soft foam pad.       Place the monitor on foreign objects. That will probably
                                                           scratch the surface of the panel or cause "Mura."




                                                           The panel is placed facedown on the lap. That will
                                                           probably cause "Mura."




ViewSonic Corporation                                                    Confidential - Do Not Copy         VG712s/b
                                                       4
2.   Specification

     1. General Requirements

         Test Resolution & Frequency               1280x1024 @ 60Hz
         Test Image Size                           Full Size
                                                   Factory Default:
         Contrast and Brightness Controls
                                                   Contrast = 70%, Brightness = 100%


     2. Signal Interface
         Video Interface
         Analog Input Connector                    DB-15 (Analog)
         Digital Input Connector                   DVI-I (Digital)
         Default Input Connector                   Defaults to the first detected input
         Video Cable Connector DB-15 Pin out       Compliant DDC 2B
         Video Signals                             1. Video RGB (Analog)
                                                   Separate
                                                   2. TMDS (Digital)
         Video Impedance                           75 Ohms (Analog), 100 Ohms (Digital)
         Exclusions                                Not compatible with interlaced video


     3. Power
         Power Supply
         Power Supply (Adapter)                    Part Number: LSE 0107A1240
         Input Voltage Range                       90 to 264 VAC
         Over Current Protection                   12.7V ~ 18V full load
         Power Dissipation                         40 Watts (typ.)


     4. Electrical Requirements

        Horizontal / Vertical Frequency
        Horizontal Frequency                       30 



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo