Service Manuals, User Guides, Schematic Diagrams or docs for : Viewsonic Мониторы LCD Мониторы LCD Viewsonic VP930-1 VP930-1 vp930-1_vp930b-1_sm_1a

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
vp930-1_vp930b-1_sm_1a


>> Download vp930-1_vp930b-1_sm_1a documenatation <<

Text preview - extract from the document
Service Manual
             ViewSonic VP930/b
                                       Model No. VS10725
                    19" Color TFT LCD Display




                                                         (VP930/b_SM Rev. 1a Oct. 2005)


ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
   Copyright

   Copyright    2005 by ViewSonic Corporation. All rights reserved. No part of this publication may be
   reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
   computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
   manual or otherwise, without the prior written permission of ViewSonic Corporation.


   Disclaimer

   ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
   contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
   purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
   to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
   changes.


   Trademarks

   Optiquest is a registered trademark of ViewSonic Corporation.
   ViewSonic is a registered trademark of ViewSonic Corporation.
   All other trademarks used within this document are the property of their respective owners.




                                         Revision History
   Revision   SM Editing Date   ECR Number                         Description of Changes                  Editor

     1a          10/19/05                    Initial Release                                               G. Han




ViewSonic Corporation                                                         Confidential - Do Not Copy      VP930/b
                                                               i
                                    TABLE OF CONTENTS


         1. Precautions and Safety Notices                                             1

         2. Specification                                                              5

         3.   Front Panel Function Control Description                                10

         4.   Circuit Description                                                     17
         5.   Adjustment Procedure                                                    18
         6.   Troubleshooting Flow Chart                                              30

         7.   Recommended Spare Parts List                                            35

         8.   Exploded Diagram and Exploded Parts List                                43

         9.   Block Diagram                                                           50
       10.    Schematic Diagrams                                                      51

       11.    PCB Layout Diagrams                                                     57




ViewSonic Corporation                                    Confidential - Do Not Copy        VP930/b
                                           ii
1. Precautions and Safety Notices

1. Appropriate Operation

      (1)    Turn off the product before cleaning.
      (2)    Use only a dry soft cloth when cleaning the LCD panel surface.
      (3)    Use a soft cloth soaked with mild detergent to clean the display housing.
      (4)    Use only a high quality, safety approved AC/DC power cord.
      (5)    Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
      (6)    If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
      (7)    Do not touch the LCD panel surface with sharp or hard objects.
      (8)    Do not place heavy objects on the LCD display, video cable, or power cord.
      (9)    Do not use abrasive cleaners, waxes or solvents for your cleaning.
      (10)   Do not operate the product under the following conditions:
             - Extremely hot, cold or humid environment.
             - Areas containing excessive dust and dirt.
             - Near any appliance generating a strong magnetic field.
             - In direct sunlight.

2. Caution
 No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar
 with all of the following safety checks and servicing guidelines.

3. Safety Check
 Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is
 exposed in such areas as the associated transformer circuits.


4. LCD Module Handling Precautions

    4.1 Handling Precautions
     (1) Since front polarizer is easily damaged, pay attention not to scratch it.
     (2) Be sure to turn off power supply when connecting or disconnecting input connector.
     (3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots.
     (4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
     (5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
     (6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling.
     (7) Do not open or modify the Module Assembly.
     (8) Do not press the reflector sheet at the back of the module in any direction.
     (9) In the event that a Module must be put back into the packing container slot after it was taken out of the
          container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the
          CFL Reflector edge softly. Otherwise the TFT Module may be damaged.
     (10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface
          Connector of the TFT Module.




ViewSonic Corporation                                                                 Confidential Do Not Copy              VP930/b
                                                                 1
      (11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or
           bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration
           that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module
           may be damaged.
      (12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local
            ordinances or regulations for disposal.
      (13) The LCD module contains a small amount of materials having no flammability grade. The LCD module
           should be supplied with power that complies with the requirements of Limited Power Source
           (IEC60950 or UL1950), or an exemption should be applied for.
      (14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950
           or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.




ViewSonic Corporation                                                      Confidential Do Not Copy           VP930/b
                                                        2
        Correct Methods:                          Incorrect Methods:

     Only touch the metal frame of the LCD       Surface of the LCD panel is pressed by
    panel or the front cover of the monitor.Do   fingers and that will probably cause
    not touch the surface of the polarizer.      "Mura".




        Take out the monitor with cushions       Taking out the monitor by grasping the
                                                 LCD panel.That will probably cause
                                                 "Mura".




ViewSonic Corporation                                    Confidential Do Not Copy   VP930/b
                                             3
         Place the monitor on a clean and soft   Placing the monitor on foreign objects.
          foam pad.                              That will probably scratch the surface
                                                 of the panel or cause "Mura."




                                                 The panel is placed facedown on
                                                 the lap. That will probably cause
                                                 "Mura."




ViewSonic Corporation                                  Confidential Do Not Copy    VP930/b
                                            4
                                   2.SPECIFICATIONS

      GENERAL specification
     Test Resolution & Frequency         1280x1024 @ 60Hz
     Test Image Size                     Full Size
                                         Factory Default:
     Contrast and Brightness Controls    Contrast = 70%, Brightness = 100%
       VIDEO INTERFACE
     Input Connector                     D-SUB1= DB-15(Analog)
                                         D-SUB2= DB-15(Analog)
                                         DVI= DVI-D(Digital)

     Default Input Connector         Defaults to the first detected input
                                     Equal to twice the weight of the monitor for
     Video Cable Strain Relief
                                     five minutes
     Video Cable Connector DB-15 Pin Compliant DDC 2B
     out
                                     Video RGB (Analog)
     Video Signals                      Separate Sync / Composite Sync / SOG
                                     TMDS (Digital)
     Video Impedance                 75 Ohms (Analog), 100 Ohms (Digital)
     Maximum PC Video Signal         950 mV with no damage to monitor
     Maximum Mac Video Signal        1250 mV with no damage to monitor
     Sync Signals                    TTL
     DDC/CI                          Compliant with Revision 1.0
     Sync Compatibility              Separate Sync / Composite Sync / SOG

                                         Shall be compatible with all PC type
     Video Compatibility                 computers, Macintosh computers, and
                                         after market video cards
                                         640 x 350, 640 x 400, 640 x 480, 640 x
                                         870, 720 x 400, 720 x 480, 720 x 576, 800
     Resolution Compatibility            x 600, 832 x 624, 1024 x 768, 1152 x 864,
                                         1152 x 870, 1280 x 720, 1280 x 768, 1280
                                         x 960, 1280 x 1024

     Exclusions                          Not compatible with interlaced video

     Horizontal / Vertical Frequency
     Horizontal Frequency                24 



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo