Service Manuals, User Guides, Schematic Diagrams or docs for : Viewsonic Мониторы LCD Мониторы LCD Viewsonic VX910 VX910 VX910_SM_834_1a

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download VX910_SM_834_1a documenatation <<

Text preview - extract from the document

Service Manual
ViewSonic VX910-1
Model No. VS10162
19" Color TFT LCD Display

(VX910_SM_834 Rev. 1a June 2004)

ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright

Copyright 2004 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.

Disclaimer

ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.

Trademarks

Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.

Revision History

Revision Date Description Of Changes Approval
1a 06/07/04 Initial Release DCN-4474 Angela Lu

ViewSonic Corporation Confidential - Do Not Copy VX910
i
TABLE OF CONTENTS

1. Precautions and Safety Notices 1

2. Specification 2

3. Front Panel Function Control Description 3

4. Circuit Description 10
5. Adjusting Procedure 22
6. Trouble Shooting Flow Chart 30

7. Recommended Spare Parts List 36

8. Exploded Diagram And Spare Parts List 40
9. Block Diagram 42
10. Schematic Diagrams 44

11. PCB Layout Diagrams 50

ViewSonic Corporation Confidential - Do Not Copy VX910
ii
1. Precautions and Safety Notices

1. Caution :
No modification of any circuit should be attempted . Service work should only be performed after you
are thoroughly familiar with all of the following safety checks and servicing guide line

2. Safety Check :
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter
circuit. These voltage are exposed in such areas as the associated transformer circuits .

3. POWER SUPPLY REQUIREMENTS
The internal power converter for this display utilizes AC and DC cords , AC cord is detachable , but DC
cord is permanently attached . Any attempt to replace another power board could result in serious problem
on the display .

4. LEAKAGE CURRENT HOT CHECK
4-1 Plug the AC cord directly into the AC outlet. Do not use an isolation transformer during this check.
4-2 Connect a 1500 ohm , 10 watt resistor , paralleled by a 0.15uF capacitor between each metallic part
and a good earth ground
4-3 Use an AC voltmeter with 1000 ohm / volt or more sensitivity and measure the AC voltage across
the combination 1500 ohm resistor and 0.15uF capacitor.
4-4 Move the resistor connection to each exposed metallic part and measure the voltage.
4-5 Reverse the polarity of the AC plug in the AC outlet and repeat the above measurement.
4-6 Voltage measured must not exceed 1.5 volt RMS, from any exposed metallic part to the ground. A
leakage current tester may be used in the above hot check, in which case any circuit measured must
not exceed 1.0 milliamp. In the case of a measurement exceeding the 1.0 milliamp value, a rework
is required to eliminate the chance of a shock hazard .

AC VOLTMETER

0.15u
.

To Metal Parts 1500 10W Earth Ground

ViewSonic Corporation Confidential - Do Not Copy VX910
1
2. Specification

Mechanical :
Dimension ( W x H x D ) mm
Set : a. with stand : 430.8 x 468.4 x 201 mm
b. Without stand : 430.8 x 370.2 x 66.2 mm
Slim bezel : 19.0 / 19.0 / 22.0 / 22.0
Base (L X W) : 286 x 201 mm
Packing : ( W x H x D ) mm : 496 x 532 x 247 mm
Weight : Net / Gross ( Kg ) : 6.7 / 8.5
Wall Mount (VESA) : 100 x 100 mm

LCD Panel type : LG / LM190E03 Rev.03
Max. resolution (HxV) : 1280 x 1024
Nominal picture size (HxV) : 376.3 mm x 301.1 mm
Display colors : 16.2 M ( 6 bit + dithering )
Dot pitch : 0.264 mm
Response time : 4+12 / 16ms (Tr + Tf / typical)
Brightness (100% white) : Typical : 250 cd/m

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo