Service Manuals, User Guides, Schematic Diagrams or docs for : Wavetek 9100_vo1umeng0000

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 9100_vo1umeng0000 documenatation <<

Text preview - extract from the document

                               W

USER'S HANDBOOK

Model 9100
Universal Calibration System

Volume 1 -- Operation




                                   Final Width = 215mm
                            User's Handbook
                                                           For

                          The Model 9100
                    Universal Calibration System
                              Volume 1 -- Operation
   (for Remote Operation, Instrument Specification, Specification Verification, Routine Maintenance and Calibration
                                       refer to Volume 2 -- Performance)




W                                   For any assistance contact your nearest Wavetek Sales and Service Center.
                                    Addresses can be found at the back of this handbook.
                                    Due to our policy of continuously updating our products, this handbook may contain minor
ISO 9002
Wavetek Ltd
                                    differences in specification, components and circuit design to the instrument actually supplied.
                                    Amendment sheets precisely matched to your instrument serial number are available on request.

CERTIFICATE
No. FM 29700
                                   Wis a US registered trademark of Wavetek Corporation.
                                                  Wavetek Corporation
                                                Standard Warranty Policy
Wavetek warrants that all Products manufactured or procured by Wavetek conform to Wavetek's published specifications and are free from
defects in materials and workmanship for a period of one (1) year from the date of delivery to the original Buyer, when used under normal
operating conditions and within the service conditions for which they were designed. This warranty is not transferrable and does not apply
to used or demonstration products.
The obligation of Wavetek arising from a Warranty claim shall be limited to repairing, or at its option, replacing without charge, any assembly
or component (except batteries) which in Wavetek's sole opinion proves to be defective within the scope of the Warranty. In the event Wavetek
is not able to modify, repair or replace nonconforming defective parts or components to a condition as warranted within a reasonable time
after receipt thereof, Buyers shall receive credit in the amount of the original invoiced price of the product.
Wavetek must be notified in writing of the defect or nonconformity within the Warranty period and the affected Product returned to Wavetek's
factory, designated Service Provider, or Authorized Service Center within thirty (30) days after discovery of such defect or nonconformity.
Buyer shall prepay shipping charges and insurance for Products returned to Wavetek or its designated Service Provider for warranty service.
Wavetek or its designated Service Provider shall pay costs for return of Products to Buyer.
Wavetek shall have no responsibility for any defect or damage caused by improper storage, improper installation, unauthorized modification,
misuse, neglect, inadequate maintenance, accident or for any Product which has been repaired or altered by anyone other than Wavetek or
its authorized representative or not in accordance with instructions furnished by Wavetek.
The Warranty described above is Buyer's sole and exclusive remedy and no other warranty, whether written or oral, expressed or implied by
statute or course of dealing shall apply. Wavetek specifically disclaims the implied warranties of merchantability and fitness for a particular
purpose. No statement, representation, agreement, or understanding, oral or written, made by an agent, distributor, or employee of Wavetek,
which is not contained in the foregoing Warranty will be binding upon Wavetek, unless made in writing and executed by an authorized
representative of Wavetek. Under no circumstances shall Wavetek be liable for any direct, indirect, special, incidental, or consequential
damages, expenses, or losses, including loss of profits, based on contract, tort, or any other legal theory.
                                                                                                                                           April 1, 1994



SAFETY WARNING!
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.


                                This product complies with the requirements of the following European Community Directives:
                                               89/336/EEC (Electromagnetic Compatibility) and 73/23/EEC (Low Voltage)
                                                                 as amended by 93/68/EEC (CE Marking).
                                However, noisy or intense electromagnetic fields in the vicinity of the equipment can disturb the measurement
                                circuit. Users should exercise caution and use appropriate connection and cabling configurations to avoid
                                misleading results when making precision measurements in the presence of electromagnetic interference.




      

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo