Service Manuals, User Guides, Schematic Diagrams or docs for : apple Printer Apple LaserWriter Select Service Source
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Apple LaserWriter Select Service Source documenatation <<
Text preview - extract from the document
K Service Source
LaserWriter Select
LaserWriter Select 300, LaserWriter Select 310,
LaserWriter Select 360
K Service Source
Basics
LaserWriter Select
Basics Paper Path - 1
Paper Path
There are three paper sources and one output tray in a
complete system.
Output Tray
Manual Feed Tray
Standard Cassette
(250 Sheets)
Optional Sheet Feeder
(250 or 500 Sheets)
Basics Sensing System - 2
Sensing System
There are four paper sensors in the LaserWriter Select
printer. Each sensor consists of an actuator, a U-shaped
photo interrupter, and circuitry that communicates back to
the DC controller.
Paper Delivery Sensor PS201
Registration Sensor PS602
Manual Feed Sensor PS701
Paper-Out Sensor PS601
Basics Interface Connectors - 3
Interface Connectors
Interface connector diagrams for each of three LaserWriter
Select models are located on the following pages.
Basics Interface Connectors - 4
LaserWriter Select 300
Mini DIN-8
Basics Interface Connectors - 5
LaserWriter Select 310
Centronics Parallel Mini DIN-8
Basics Interface Connectors - 6
LaserWriter Select 360
RJ-11 Centronics Parallel Mode Switch RS-232 Mini DIN-8
(Optional
Fax Port)
Basics LaserWriter Safety - 7
LaserWriter Safety
Unplug Printer
LaserWriter printers operate at high voltages. To prevent
serious injury, always switch off the printer and unplug the
AC power cord before servicing the printer.
Laser Beam Safety
Never remove the cover of the laser/optic assembly or
disconnect the beam-detect cabling when the printer is
switched on. Although the reflected laser beam is invisible,
direct exposure to it can permanently damage your eyes.
Never disassemble the laser/optical assembly, whether the
printer is powered on or not. The laser diode and focusing
lenses are factory-aligned.
Basics LaserWriter Safety - 8
Fuser Heat
The fuser assembly rollers become very hot during printer
operation. Before servicing the fuser assembly, switch off
the printer for at least 5 minutes to allow the fuser
assembly rollers to cool.
Toner Safety
Toner is a nontoxic substance composed of plastic, iron, and
a small amount of pigment. Clean skin and clothing by
removing as much toner as possible with a dry tissue and
then washing with cold water. Hot water causes toner to jell
and permanently fuse into clothing. Toner attacks vinyl
materials, so don't allow toner to contact vinyl.
Motor Stops When Cassette is Removed
For safety purposes, the main motor on the LaserWriter
Basics LaserWriter Safety - 9
Select 360 stops when the paper cassette is removed.
Weight
LaserWriter printers are heavy. When lifting or moving
the printer, be careful not to strain your back.
K Service Source
Specifications
LaserWriter Select
Specifications General - 1
General
Engine Select 300/310: Fuji Xerox P0 engine
Select 360: Fuji Xerox P1 engine
Printing Method Electrophotography using single-component dry toner
Optical System Semiconductor laser
Resolution Select 300/310: 300 dots per inch (dpi)
Select 360: 600 dpi (300 dpi in PCL mode)
Imaging Languages Select 300: QuickDraw
Supported Select 310: PostScript
Select 360: PostScript and HP PCL
Specifications Intro Dates - 2
Intro Dates
Select 300/310 February 1993
500-Sheet Feeder August 1993
Select 360 October 1993
Specifications Logic Board - 3
Logic Board
CPU Select 300: N/A
Select 310: AMD Am29205; 16 MHz
Select 360: AMD Am29200; 15 MHz
DRAM Select 300: 512K, expandable to 1.5 MB or 4.5 MB
Select 310: 1.5 MB, expandable to 5.5 MB
Select 360: 7 MB (3 MB soldered on board), expandable to 16 MB
Note: If you install a 16 MB RAM SIMM, the 3 MB of soldered
RAM is not used.
ROM Select 300: 32K
Select 310: 1 MB, expandable to 2 MB
Select 360: 4 MB
Specifications Logic Board - 4
I/O Select 300: RS-422
Select 310: RS-232; Centronics parallel connector
Select 360: RS-232; Centronics parallel connector; AppleTalk
DIN-8
Specifications Performance - 5
Performance
Print Delivery Face-down
Life Expectancy Select 300/310: 150,000 pages
Select 360: 300,000 pages
Printing Speed Select 300/310: 5 pages-per-minute maximum; actual
performance depends on the application.
Select 360: 10 pages-per-minute maximum; actual performance
depends on the application.
Specifications Built-In-Fonts - 6
Built-In-Fonts
LaserWriter Select 39 fonts from the following font families: Avant Garde, Bookman,
300 Chicago, Courier, Geneva, Helvetica, Helvetica Narrow, Monaco,
New Century Schoolbook, New York, Palatino, Symbol, Times,
Zapf Chancery, and Zapf Dingbats.
LaserWriter Select 13 fonts from the following font families: Courier, Helvetica,
310 Times, and Symbol. Additional PostScript fonts can be
downloaded to printer memory.
LaserWriter Select Fonts from the following font families: Avant Garde, Bookman,
360 Courier, Helvetica, Helvetica Narrow, New Century
Schoolbook, Palatino, Symbol, Times, Zapf Chancery, and Zapf
Dingbats.
Specifications Electrical - 7
Electrical
Line Voltage US/Japan:100-115 VAC, 50-60 Hz
Europe/Australia:220-240 VAC, 50 Hz
Power Consumption 450 W maximum at115 V or 220V
Specifications Physical - 8
Physical
Dimensions Height: 8.0 in. (25.3 cm)
Width: 15 in. (38 cm)
Depth: 18.3 in. (45 cm)
Weight 26.4 lbs. (12 kg)
Specifications Environmental - 9
Environmental
Temperature 50◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo