Service Manuals, User Guides, Schematic Diagrams or docs for : epson printer Epson EPL-3000 Service Manual
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Epson EPL-3000 Service Manual documenatation <<
Text preview - extract from the document
EPSON TERM NAL PR NTER
EPL-3000
ActionLaser 1300
SERVICE MANUAL
EPSON
NOTICE
All rights reserved. Reproduction of any part of this manual in any form whatsoever without
SEIKO EPSON's express written permission is forbidden.
The contents of this manual are subjects to change without notice.
All efforts have been made to ensure the accuracy of the contents of this manual. However, should
any errors be detected, SEIKO EPSON would greatly appreciate being informed of them.
The above notwithstanding SEIKO EPSON can assume no responsibility for any errors in this
manual or the consequence thereof.
Epson is registered trademark of Seiko Epson Corporation.
General Notice: Other product names used herein are for identication purposes only and maybe
trademarks of their respective campanies.
t
!
Copyright @ 1994 by SEIKO EPSON CORPORATION Nagano, Japan
G' i
-i-
SAFETY INFORMATION
This printer is a page printer which operates by means of a laser. There is no possibility of danger from
the laser, provided the printer is operated according to the instructions in this manual provided.
Since radiation emitted by the laser is completely confined within protective housings, the laser beam
cannot escape from the machine during any phase of user operation.
For United States Users;
[Laser Safety]
This printer is certified as a Class 1 Laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard according to the Radia-
tion Control for Health and Safety Act of 1968. This means that the printer does not
produce hazardous laser radiation.
[CDRH Regulations]
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2,1976. Compli-
ance is mandatory for products marketed in the United States. The label shown below
indicates compliance with the CDRH regulations and must be attached to laser products
marketed in the United States.
WARNING: Use of controls, adjustments or performance of procedures other
thanthosespecified in this manual may result in hazardous radiation exposurel
[Internal Laser Radiation]
Maximum Radiation Power: 3.025 X 1OA (W)
Wave Length: 780 *20 nm
This is a Class IIIb Laser Diode Assay that has an invisible laser beam. The print head
unit is NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not be
opened under any circumstances.
For Other Countries Users;
WARNING: Use of controls, adjustments or performance of procedures other
than those specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 3.025
x 104 W and the wavelen gth is 780 f 20 nm.
For Denmark Usem;
ADVARSEL
Usynlig laserstr~ling ved iibning, ni% sikkerhedsafbrydere er ude af funktion.
Undgi?i udszttelse for strtiling.
Klasse 1 laser produkt der opfy lder IEC825 sikkerheds kravene. I
...
- Ill -
SAFETY INFORMATION
This printer is a page printer which operates by means of a laser. There is no possibility of danger from
the laser, provided the printer is operated according to the instructions in this manual provided.
Since radiation emitted by the laser is completely confined within protective housings, the laser beam
cannot escape from the machine during any phase of user operation.
For United Slates Users;
[Laser Safety]
This printer is certified as a Class 1 Laser prcduct under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard according to the Radia-
tion Control for Health and Safety Act of 1968. This means that the printer does not
produce hazardous laser radiation.
[CDRH Regulations]
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2,1976. Compli-
ance is mandatory for products marketed in the United States. The label shown below
indicates compliance with the CDRH regulations and must be attached tolaserproducts
marketed in the United States.
I WARNING: Use of controls, adjustments or performan ceof procedures othe
thanthosesoecified in this manual mav result inhaardous radiation exDosure1
[Internal Laser Radiation]
Maximum Radiation Power: 3.025X 10 4 (w)
Wave Length: 780 + 20nm
This is a Class IIIb Laser Diode &say that has. an invisible laser beam. The print head
unit is NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not be
opened under any circumstances. .- ,.
. ,.,
~) "
For Other Coun&ks Users;
WARNING: Use of controls, adjustments or perforrnan ce of procedures other
thanthosespeci "fied in this manual may result in hazardous radiationexposurel
This is a semiconductor laser. The maximum power of the laser diode is 3.(X#
x 104 Wand the wavelength is 780 f 20 nm.
For Denmark Usem;
ADVARSEL
Usynlig laserstdling ved &mins &r sikkerhedsafbrydere er ude af funktion.
Undgi% udszettelse for str?ding.
Klasse 1 laser produkt der opfylder IEC825 sikkerheds kravene. I
...
- Ill -
For Finland, Sweden Users;
VAROITUS
Laitteen kiiyttaminen muulla kuin tiissii lciiyttoohjeessa mainitulla tavalla saat-
taa altistaa kayttajan turvallisuusluokan 1 ylittavalle nakymattomalle
lasersateiylle.
VARNING
Om apparaten anviinds pa annat satt an i denna bruksanvisning specificerats,
kan anviindaren utsattas for osynlig laserstriNnin& som overskrider gransen
for laser klass 1.
For Finland, Sweden Service People
VAROITUS
Avattaessa ja suojalukitus ohitettaessa olet alttiina nakymattorrkille laser-
sateilylle. Ala katso sateeseen.
VARNING
Osynlig laserstrNning niir denna del ar oppnad och sparren ar urkopplad.
Betrakta ej stri?den.
For Norway Users;
ADVARSEL
Dersom apparatet brukes pii annen rni%e em spesifisert i denne bruksan-
visning, kan brukeren utsettes for unsynlig laserstr~ling som overskrider
grensen for laser klasse 1.
Dette er en halvleder laser. Maksimal effeckt til laserdiode er 3.025 x 10 -4 W
og bolgelengde er 780 * 20 nm.
Laser Safety Labels
[Label on rear printer case]
A laser safety labels is attached on the outside of the printer shown below.
For United State
This laser product conferms to the
applicable requirement of 21 CFR
Chapter 1, subchapter J.
SEIKO EPSON CORP.
Hirooka Office
80 Hirooka, Shiojiri-shi, Nagano-ken,
JAPAN
MANUFACTURED:
- iv -
For Europa
[Lsbel inside printer]
The following laser safety label will be attached inside the printer as shown below.
For Danmark, Finland, Swadan, and Norway
C..")
.
I \ 1%
I I
I
-..,
IB CAUTIO N- NVISISLE LASER RADIATION WHEN OPEN AVOID
EXPOSURE TO BEAM
(J
I
VORSICHT- U"iJSICNTBARE LASERSTRAHLUNG WENN ABOECKUNG
GE6FFNET NICNT DEM STRA~L AUSSSTZEN
AOYARSEL-USYNLIG LASERSTRiLlffi NAR OEKSEL hJES U*
EKSPONERING FOR STRdLEN
VARO ! AVATTAESSA OLET -A~TTllNA N~KYMiTT6M~LLE
LASERSATEILYLLE ALA KATSO S.ATEESEEN
AOVARSEL-USYNIJG LASERSTtiLING VED ABNING UNDG/i
uD.9ETTELSE FOR STf7ALlNG
VARNING- OSYNLIG LASERSTRiLNING NAR OENNA O E L h I%WAD
STF&LEN AR FARLIG
-v-
PREFACE
This manual describes functions, theory of electrical and mechanical operations, maintenance, and repair
of EPL-3000/ActionLaser 1300.
The instructions and procedures included herein are intended for the experience repair technician, and
attention should be given to the precautions on the preceding page. The chapters are organizd as
follows:
CHAPTER 1. GENERAL DESCRIPTION
Provides a general product overview, lists speeitications, and illustrates the main components of the printer.
CHAPTER 2. OPERATING PRINCIPLES
Describes the theory of printer operation.
CHAPTER 3. DISASSEMBLY AND ASSEMBLY
Includes a step-by-step guide for product disassembly and assembly.
CHAPTER 4. ADJUSTMENT
Includes a step-by-step guide for adjustmen~
CHAPTER 5. TROUBLESHOOTING
Provides Epson-approved techniques for adjustment.
CHAPTER 6. MAINTENANCE
Describes preventive maintenance techniques and lists lubricants and adhesives required to service the equipment.
APPENDIX
Describes connector pin assignments, circuit diagrams, circuit board component layout and exploded diagram.
The contents of this manual are subject to change without notice.
- vi -
REVISION SHEET
t T
Revision laeue Date Revision Page
Rev. A July 22,1994 let iesue
C"
5.
`i
.. .
- vii -
TABLE OF CONTENTS
CHAPTER 1. GENERAL DESCRIPTION
CHAPTER 2. OPERATING PRINCIPLES
CHAPTER 3. DISASSEMBLY AND ASSEMBLY
CHAPTER 4. ADJUSTMENT
CHAPTER 5. TROUBLESHOOTING
CHAPTER 6. MAINTENANCE
APPENDIX
...
- Vlll -
Chapter 1 General Description
Table of Contents
1.1 FEATURES 1-1
1.2 SPECIFICATIONS 1-3
. -
1.2.1 Basic Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-~
1.2.2 Electrical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
1.2.3 Reliability Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
1.2.4 Environmental Conditions for Operation (Including Imaging Cartridge). . 1-5
1.2.5 Environmental Conditions for Storage and Transportation
(Excluding Image Cartridge) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
1.2.6 Applicable Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
1.2.7 Consumable (Imaging Cartridge) Specifications . . . . . . . . . . . . . . . . . . . 1-6
1.2.8 Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
1.2.9 Software Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
1.3 INTERFACE SPECIFICATIONS 1-9
1.3.1 Parailellnterface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
1.3.1.1 Compatibility lvlodeof Parallel Interface. . . . . . . . . . . . . . . . . . . 1-9
1.3.1.2 Reverse Mode... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
1.3.2 Optional Interface C82305*/C82306* (EPL-3000 only) . . . . . . . . . . . . . 1-15
1.4 OPERATING INSTRUCTIONS 1-16
1.4.1 Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
1.4.2 Service Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
1.4.3.1 Hexadecimal Dump Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
1.4.3.2 Factory Service Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
1.4.3.3 EEPROM Format Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
1.4.3 Message Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
1.4.3.1 Status and Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
1.4.3.2 SewiceCall Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
1.4.4 Printer Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
1.4.5 Emulation Mode Switch Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
1.4.5.1 Emulation Switch by SPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
1.4.5.2 Intelligent Emulation Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
1.4.6 Resolution Improvement Technology . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21
1.4.7 Toner Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
1.4.8 Optional Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
1.5 MAIN COMPONENTS 1-23
1.5.1 C144 MAIN Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
1.5.2 ROM SIMM Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
1.5.3 PWB-E Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
1.5.4 PWB-F Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
1.5.5 Optical Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
1.5.8 Fusing Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27
1.5.9 Drive Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........ 1-27
1.5.10 Imaging Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27
EPL-3000 /ActionLaser 1300 Sewice Manual General Description
1.1 FEATURES
The EPSON@ EPL-3000 and the ActionLaserTM 1300 are non-impact page printers that combine a
semi-conductor laser with electro-photographic technology. These printers are small and light, and
feature high-speed, high-resolution printing. Maintenance is very easy because of various built-in
diagnostic functions. The main features are:
c1 No ozone
Ct Printing speed -- 4 ppm (pages per minute)
cl Resolution -- 300 dpi (dots per inch)
c1 Light weight -- about 7 kg (15 lb.)
c1 Small footprint
Q Easy maintenance
c1 HP@ LaserJet@ 4L emulation mode (PCL@5e emulation)
D 22 built-in scalable fonts (8 Agfa@ and 14 TrueType fonts)
a Resolution Improvement Technology (RITech) refines the print quality by eliminating jagged
edges from images and characters.
c1 Two levels (35~o less and 50~0 less) for Toner Save Mode
c1 Optional EPSONScript Level 2 (PostScript@ compatible) SIMM module
c1 Optional WPS (Windows Printing System) SIMM module
Q 1 MB standard RAM and up to 5 MB RAM with the addition of optional SIMM
c1 Bidirectional parallel interface
c1 High-speed parallel communication rate of approximately 125 KB/second
c1 A multi-user, multi-emulation mode (EPL-3000)
c1 IES (Intelligent Emulation Switch) allows switching between EPSONScript mode and PCL5e
emulation mode.
c1 SPL (Shared Printer Language) enables switching of the printer mode by command.
Figure 1-1 shows an exterior view of the EPL-3000 and ActionLaser 1300.
Paper support
(Paper suppoti\extenSiOn)
. Latch
J"---+!n!?! Parallel
interface
-B%&R1 / cover
cover
\ ~ l\
. - , ,-. . . . . Control
Ac mleT i-usel
, panel
%\
Power
Switchl \w//
Imaging
cartridge
\
T Front cover
paper guides
Figure 1-1. Exterior View of the EPL-3000
and ActionLaser 1300
Rev. A 1-1
General Description EPL~(M/ActionLaser 13W Service Umue!
Table 1-1 lists the optional units avaiiable tbr the EPL-3000 and ActionLaser 1300.
Table 1-1. Options for EPL-3000 and ActionLaser 1300
I MachineType
Cat. No. Description Note Action
EPL- y6&
3000
Supports EPSONScript
EPSONScript Level 2 SIMM Level 2 mode (PostScript
C83212* Yes Yes
Module Level 2 mmpatible) fonts and
commands
Supports AtWork Printing
283213* AWPS SIMM Module Yes Yes
System
-- Bitmap Local Language Font SUWRS bitmap local
Yes No
ROM Chip language fonts
-- Scalable Local Language Font Supports scalable local Yes No
ROM Chip language fonts
-- Thai Font ROM Chip Suppotis Thai fonts Yes No
3051020 Imaging cartridge Toner cartridge Yes Yea c?
&
.. . . . ;
:::::$ Serial interface card -- Yes No
>82307W Yes No
32 KB serial interface card --
282308X
28231 OW -- Yes No
32 KB parallel interface cad
28231 1X
282312X I LocalTalkcard -- Yes I No
28231 4X COAX interface card -- Yes No
28231 5* TWINAX interface card -- Yes No
Notes:
1. These printers can use only one optional ROM SIMM module.
2. The EPL-3M10can useonlyoneoptional ROMchip.
3. The ActionLaser 1300 has not optional Type-B interface card slot.
0 .'. : --
-,.,.
$
,,
@
1-2 Rev. A
EPL-3000/ActionLaser 1300 Service Manual General Description
1.2 SPECIFICATIONS
This section provides statistical data for the EPL-3000 and ActionLaser 1300.
1.2.1 Basic Specifications
Printing method: Laser beam scanning and dry electro-photography
Resolution: 300 dpi
Printing speed: 4 ppm (letter/A4)
First printing time (A4/LT): Less than30 seconds
Warm-up time: Less than 40 seconds
(at rated current and 23`C (73 0 F) temperature)
Paper supply: See Table 1-2.
Table 1-2. Paper Feed Methods
Capacity Usage Thickness
Paper Supply (20 lb. (70 /m2) Paper Size (Ream Weight)
paperY
A5, B5, A4, LT,
16 to 24 lb.
150 GLT, EXE, LG,
(60 to 90 g/m2)
GLG, F4, HLT
Auto feed
Standard built-in Monarch, Envelopes made
paper tray 5 to 10 DL, C5, C6, IB5 of 16 to 24 lb. (60
Commercial-10 to 90 g/m2) paper
Any size feedable 16 to 42 lb.
Manual feed 1 (Note 2) (60 to 157 g/m2)
Notes:
1. The weight inpounds (lb.) is determined by how much 500 sheets cut to 17 x 22 inches would
weigh; l-g/mz= 0.2659763 lb.
2. Paper size range: width 3.0 to 8.5 inches (76.2 to 216 mm)
length 5.0 to 14.0 inches (127 to 356 mm)
Paper types: See Table 1-3.
Table 1-3. Paper Types
Xerox@ 4024 DP paper
Standard paper 20 lb. (75 g/m2)
Regular photocopier paper
Bond paper
Normal paper Recycled paper
16 to 24 lb. (60 to 90 g/m2)
Card stock (90 to 157 g/m2)
Envelopes
Labels
Special paper Letterhead
Transparency (OHP) sheets
Colored paper
Rev. A 1-3
General Description EPL4000/ActionLaser 1300 Service h#imual
Usability of special paper: See Table 1-4.
Table 1-4. Uaability of Special Paper
Input output OHP Envelopes Labels Card Stock Letterhead
Standard
built-in paper Face down P P P P R
tray
R: Reliable feeding and good image quality.
P: Possible, but better avoided.
N: Not supported.
Paper feed alignment and direction: Center alignment for all sizes
Paper ejection: Face down
Output tray capacity: 50 sheets (standard paper)
Printable area (standard paper): See Figure 1-2.
4.Omm
--
i
0
Printable Areii
-- 4.Omm
i
-- I 4.Omm -- 4
Figure 1-2. Printable Area c'
Note: The actual printable area depends on the printer mode.
Noise: Less than 30 dB(A) (standby)
Less than 47 dB(A) (operating)
Ozone density: Less than 0.01 ppm
Toxicity: No toxicity exists in organic photo conductor (OPC), toner,
or plastic materials
,.
0
.!
1-4 Rev. A
EPL-3000 /ActionLaser 1300 Service Manual General Description
1.2.2 Electrical Specifications
Table 1-5. Electrical Specifications
Description lMl V Version 200 V Version
Rated voltage 100-120 VAC 220-240 VAC
Input voltage range 90-132 VAC 198-264 VAC
Rated frequency range 50-60 Hz
I
Input frequency range 4 7 - 6 3 tiz
Power consumption Less than 350 W Less than 450 W
Power consumption while
Less than 15 W
in standby mode
1.2.3 Reliability Specifications
MPBF (Mean Prints Between Failures): Over 17,000 sheets
Note: MPBF indicates the average number of pages printed before the occurrence of a problem
requiring replacement or service.
MTBF (Mean Time Between Failures): 3000 power-n hours (POH)
Jam rate: 1 out of 2,000 sheets or less (excluding multiple-sheet feeding)
Feed failure: 1 out of 2,000 sheets or less (excluding multiple-sheet feeding)
Multiple paper feeds: 1 out of 500 sheets or less
Paper curl height: 30 mm (1.2 inches) or less
Leading edge bending (1 cm or more): 1 out of 1,000 sheets
MTTR (Mean Time To Repair): 30 minutes or less
Durability: 5 years or 100,0000 sheets
1.2.4 Environmental Conditions for Operation (Including Imaging Cartridge)
Temperature: 10 to 35◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo