Service Manuals, User Guides, Schematic Diagrams or docs for : panasonic Video NV-HD636EG_EU_SVC Viewing SGML_VIEW_DATA EU NV-HD636EG SVC aa06mp04

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download aa06mp04 documenatation <<

Text preview - extract from the document

Pin No. In/Out      Port Name                                       Function
  82      I      POWER KEY(H)   Power on/off key input.
  83      I      SHORT DN       DC voltage (BIAS (H)) detection.
                                    When detecting High at BIAS (H) during BIAS (H) is set to except high, complsory power
                                    is turned off (Self test indication display F08).
                                    When detecting Low at BIAS (H) during BAIS (H) is set to high, complsory power is
                                    turned off (Self test indication display F07).
  84      I      Csync          C sync signal (Built in sync separation circuit) input.
  85      I      CAP.FG         Capstan FG input.
  86      I      CYL.PFG        Cylinder PFG input.
  87      I      SECAM24(H)     Video head selection input.
                                    In SECAM model, this port is high when using 24u head chip for LP mode is mounted on the
                                    cylinder.
 88       -      GND            GND.
 89       O      OREF           Op amp output for 1/2 VDD reference.
 90       I      IREF           Op amp input for 1/2 VDD reference.
 91       I      CTL.HEAD(-)    Control signal (-) input.
 92       I      CTL.HEAD(+)    Control signal (+) input.
 93       O      CTL.AMP.SW     Control amp switching output.
 94       I      CTL.AMP.IN     Control amp input.
 95       I      CTL.AMP.REF    Control amp reference input.
 96       -      CTL.AMP.GND    Control amp GND.
 97       O      PB.CTL.OUT     Control amp output.
 98       -      5V(A)          Analog 5V.
 99       -      5V(AD)         5V.
 100      O      Not used

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo