Service Manuals, User Guides, Schematic Diagrams or docs for : ricoh Copiers Aficio350_450 r_af350e
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download r_af350e documenatation <<
Text preview - extract from the document
!"#$% Technical Bulletin PAGE: 1/1
Model: Adonis-C1 (Scanner Option) Date: 05-Apr-00 No.: RA283001
Subject: Service Manual Correction Prepared by: K. Takagi
From: Technical Services Dept., GTS Division
Classification: Troubleshooting Part information Action required
Mechanical Electrical Service manual revision
Paper path Transmit/receive Retrofit information
Other ( )
Please add the following SP mode in your Adonis-C1 Scanner Kit service manual, on page
4-2.
SP mode No. 017 has been added so that the scanning margin can be adjusted. This was
made available with the release of scanner controller firmware version 4.0.0.
No Function Settings
017 Trimming Adjusts the scanning margins for both the main and 0~5
sub scan directions. 1 mm / step
The larger the value, the wider the margin. 0
!"#$% Technical Bulletin PAGE: 1/1
Model: Adonis-C1 Date: 26-Apr-00 No.: RA283002
Subject: ROM History (Adonis-C Fax Option) Prepared by: M. Mano
From: Technical Services Dept., GTS Division
Classification: Troubleshooting Part information Action required
Mechanical Electrical Service manual revision
Paper path Transmit/receive Retrofit information
Other ( )
Firmware history for the Adonis-C Fax Option
File No.
A2855581 (A285Uxxx) Version C.SUM Production
A 001 16.01 91C6 1st Mass Prod.
B 002 18.00 ED65 April Prod. `00
Symptoms Corrected USA
When sending an original wider than the maximum paper width of the B
receiving machine (Auto-Reduction OFF / JBIG compression), the
machine cuts the image to the smaller size but sends the left-most area
of the image instead of the central area.
Even though the following bit switch settings should disable the File B
Retention function, the machine retains files for 24 hours:
User Parameter switch 24 (swusr_18):
(bit1, bit0) = (1, 0)
When bit 4 of Communication switch 07 is 1 (Fallback from G4 to G3 B
when G4 communication fails on the ISDN B-channel is enabled) and a
G4 communication error occurs on the ISDN B-channel (ADF mode), the
machine falls back to G3 and resumes transmission from the second
page. This is because the first page has already fed out from the ADF.
A2855581 A874-17
B TBA
Technical Bulletin PAGE: 1/2
Model: Adonis-C1 Date: 14-Jun-00 No.: RA283003
Subject: Service Manual Correction Prepared by: S. Tomoe
From: Technical Services Dept., GTS Division
Classification: Troubleshooting Part information Action required
Mechanical Electrical Service manual revision
Paper path Transmit/receive Retrofit information
Other ( )
Please correct your Service Manuals as follows.
1. Restricted Access Control for Key Counter
This function can only be selected in UP Mode.
1) Key Counter Installation [Section 3.13], Step 11 (Page 3-45)
- Incorrect -
11. Change the value of SP5-401-2 to 1.
NOTE: The key counter function is available for fax and printer modes by
changing the following SP mode
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo