Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Acura 3.5RL 1996-2004 Approved srm RL9604A19007A

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download RL9604A19007A documenatation <<

Text preview - extract from the document

                Main Menu                 Table of Contents



Steering Angle Sensor
 Neutral Position Check and Memorizing
 Check

 1. Connect the SCS service connector to the service check connector (2P) located under the glove box.

 2. Turn the ignition switch ON (II). The VSA activation indicator comes on then goes off.

 3. Press the VSA off switch one time before the VSA activation indicator comes on again.

 4. Check that the VSA activation indicator comes on when the steering wheel is in the straight ahead position (neutral
    position), and the indicator goes off when the steering wheel turns to the right or left more than 2.5 degrees.

 5. If the VSA activation indicator does not come on or go off, perform the neutral position memorizing procedure.
                Main Menu                 Table of Contents



Steering Angle Sensor
 Neutral Position Check and Memorizing (cont'd)
 Memorizing

 NOTE: Beacause timing is impotant, familiarize yourself with the whole procedure before you begin.

 1. Connect the SCS service connector to the service check connector (2P) located under the glove box.

 2. Turn the steering wheel to the straight ahead position, then turn the ignition switch ON (II). The VSA and ABS indica-
    tors come on for 2 seconds then go off for 1 second.

 3. Quickly push and release the VSA off switch two times before the VSA and ABS indicators come back on. (If this step is
    not completed during the 1 second that the VSA and ABS indicators are out, the VSA control unit will not enter the
    steering angle neutral memorization mode and the VSA activation indicator will go out before the procedure is fin-
    ished.) The VSA activation indicator comes on for 0.3 seconds, goes off for 0.2 seconds, then come back on.
    The ABS indicator blinks DTC 84. (This code will clear after the steering angle sensor neutralization has been success-
    fully completed.)

 NOTE: Do steps 4 - 7 in less than 7 seconds.

 4. Turn the steering wheel from the straight ahead position to the right about 20 degrees until the VSA activation indica-
    tor goes off. Return the steering wheel to the straight ahead position (the VSA activation indicator comes back on).

 5. Turn the steering wheel to the left about 20 degrees until the VSA activation indicator goes off.

 6. Return the steering wheel to the straight ahead position, and press the VSA off switch. The VSA activation indicator
    goes off then comes back on. (If the VSA activation indicator does not come back on, disconnect the VSA modulator
    42P connector for 30 seconds. Reconnect the 42P connector and repeat steps 2 - 7.)

 7. Press the VSA off switch again. The VSA activation indicator blink five times. If the indicator does not blink, repeat the
    neutral position memorizing procedure.

 Memorizing Timing Chart

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo