Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Dodge Durango 1998-2000 Approved Dodge Durango 1998-99 98DN_13
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 98DN_13 documenatation <<
Text preview - extract from the document
DN FRAME AND BUMPERS 13 - 1
FRAME AND BUMPERS
CONTENTS
page page
BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
BUMPERS
INDEX
page page
REMOVAL AND INSTALLATION FRONT BUMPER INNER BRACKET . . . . . . . . . . . 1
FRONT BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . 1 REAR BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FRONT BUMPER FASCIA . . . . . . . . . . . . . . . . . . 1 REAR BUMPER FASCIA . . . . . . . . . . . . . . . . . . . 3
REMOVAL AND INSTALLATION (4) Engage wire connectors to fog lamps, if
equipped.
FRONT BUMPER (5) Install push-in fasteners attaching air deflector
to front bumper fascia.
REMOVAL (6) Remove lifting device.
(1) Open hood. (7) Close hood.
(2) Support front bumper on a suitable lifting
device. FRONT BUMPER INNER BRACKET
(3) Disengage wire connectors from fog lamps, if
equipped. REMOVAL
(4) Disengage push-in fasteners attaching air (1) Remove bolts attaching top of bumper to
deflector to bottom of bumper fascia. bumper bracket.
(5) Pull the front wheelhouse liner back at the (2) Remove nuts attaching inner bumper bracket
bumper and remove bolts attaching outer bumper to frame (Fig. 1).
brackets to frame rail (Fig. 1). (3) Using a shallow socket and extension or equiv-
(6) Remove the bolts attaching the bumper to the alent, tap with a hammer to drive inner bumper
inner bumper bracket. bracket studs out of frame.
(7) Separate front bumper with outer bracket (4) Separate inner bumper bracket from frame.
attached from vehicle.
INSTALLATION
INSTALLATION (1) Position inner bumper bracket studs into frame.
When the front bumper is installed, there should (2) Install nuts attaching inner bumper bracket to
be a 19 mm gap between the bumper and front frame. Tighten nuts to 94 N◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo