Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Dodge Durango 1998-2000 Approved Dodge Durango 2000 00dn_13
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 00dn_13 documenatation <<
Text preview - extract from the document
DN FRAME AND BUMPERS 13 - 1
FRAME AND BUMPERS
TABLE OF CONTENTS
page page
BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
BUMPERS
TABLE OF CONTENTS
page page
DESCRIPTION AND OPERATION FRONT BUMPER INNER BRACKET. . . . . . . . . . . .2
BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FRONT BUMPER FASCIA . . . . . . . . . . . . . . . . . . .2
REMOVAL AND INSTALLATION REAR BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . .2
FRONT BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . 1 REAR BUMPER FASCIA . . . . . . . . . . . . . . . . . . . .3
DESCRIPTION AND OPERATION (5) Pull the front wheelhouse liner back at the
bumper and remove bolts attaching outer bumper
BUMPERS brackets to frame rail (Fig. 1).
(6) Remove the bolts attaching the bumper to the
DESCRIPTION inner bumper bracket.
Bumpers are used at the front and rear of the (7) Separate front bumper with outer bracket
vehicle. Bumpers are incorporated into the design of attached from vehicle.
the front and rear fascias. They are mounted to the
frame with brackets and may contain some lamp ele- INSTALLATION
ments. When the front bumper is installed, there should
be a 19 mm gap between the bumper and front
OPERATION fender.
Bumpers are designed to protect the exterior sheet- (1) Place the bumper on a suitable lifting device
metal in low impact situations. The bumpers are and position the bumper at the vehicle.
attached to the frame and provide mounting points (2) Install the bolts attaching front bumper to
for some optional accessories such as fog lights. inner bumper bracket. Tighten to 94 N◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo