Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Infiniti FX45 FX35 2006-2008 Approved FX45_35-S50-2006 se
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download se documenatation <<
Text preview - extract from the document
SEAT
I BODY
A
SECTION SE SEAT
B
C
D
E
CONTENTS
PRECAUTIONS ......................................................... 3
. CAN Communication Unit ...................................... 16 . F
Precautions for Supplemental Restraint System Schematic .............................................................. 17
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- Wiring Diagram -- AUT/DP -- .............................. 19 .
SIONER" ................................................................. 3
. Terminals and Reference Values for BCM ............. 31 . G
Service Notice ......................................................... 3
. Terminals and Reference Values for Automatic
PREPARATION .......................................................... 4
. Drive Positioner Control Unit ................................. 31 .
Special Service Tools .............................................. 4
. Terminals and Reference Values for Driver Seat
H
Commercial Service Tools ....................................... 4 . Control Unit ............................................................ 33
.
SQUEAK AND RATTLE TROUBLE DIAGNOSES..... 5 Work Flow .............................................................. 36
.
Work Flow ............................................................... 5
. Preliminary Check ................................................. 36.
CUSTOMER INTERVIEW .................................... 5 . SETTING CHANGE FUNCTION ........................ 36 . SE
DUPLICATE THE NOISE AND TEST DRIVE ...... 6 . CHECK POWER SUPPLY AND GROUND ........ 37 .
CHECK RELATED SERVICE BULLETINS .......... 6 . CONSULT-II Function (AUTO DRIVE POS.) ......... 39 .
LOCATE THE NOISE AND IDENTIFY THE CONSULT-II OPERATION .................................. 39 . J
ROOT CAUSE ..................................................... 6 . SELF-DIAGNOSIS RESULTS ............................ 39 .
REPAIR THE CAUSE .......................................... 6 . DATA MONITOR ................................................ 40 .
CONFIRM THE REPAIR ...................................... 7 . ACTIVE TEST .................................................... 41 .
K
Generic Squeak and Rattle Troubleshooting .......... 7 . Check CAN Communication System ..................... 42 .
INSTRUMENT PANEL ......................................... 7 . Symptom Chart ...................................................... 42
.
CENTER CONSOLE ............................................ 7 . Check Sliding Motor Circuit ................................... 43 .
DOORS ................................................................ 7
. Check Reclining Motor Circuit ............................... 45 . L
TRUNK ................................................................. 8
. Check Front Lifting Motor Circuit ........................... 46 .
SUNROOF/HEADLINING .................................... 8 . Check Rear Lifting Motor Circuit ............................ 47 .
SEATS .................................................................. 8
. Check Telescopic Motor Circuit ............................. 49 . M
UNDERHOOD ...................................................... 8 . Check Tilt Motor Circuit ......................................... 50 .
Diagnostic Worksheet ............................................. 9 . Check Driver Side Mirror Motor Circuit .................. 51 .
AUTOMATIC DRIVE POSITIONER ..........................11 . Check Passenger Side Mirror Motor Circuit .......... 53 .
System Description ................................................11. Check Sliding Sensor Circuit ................................. 55 .
MANUAL OPERATION .......................................11 . Check Reclining Sensor Circuit ............................. 56 .
AUTOMATIC OPERATION .................................11 . Check Front Lifting Sensor Circuit ......................... 57 .
MEMORY STORING AND KEYFOB INTER- Check Rear Lifting Sensor Circuit ......................... 58 .
LOCK STORING ................................................ 12 . Check Telescopic Sensor Circuit ........................... 59 .
MEMORY SWITCH OPERATION ...................... 13 . Check Tilt Sensor Circuit ....................................... 60 .
ENTRY OPERATION ......................................... 13 . Check Driver Side Mirror Sensor Circuit ................ 61 .
EXITING OPERATION ....................................... 13 . Check Passenger Side Mirror Sensor Circuit ........ 62 .
KEYFOB INTERLOCK OPERATION ................. 14 . Check Steering and Door Mirror Sensor Power Sup-
FAIL- SAFE MODE ............................................ 14 . ply and Ground Circuit ........................................... 64 .
CANCEL OF FAIL-SAFE MODE ........................ 14 . Check Front Door Switch (Driver Side) Circuit ...... 65 .
Component Parts and Harness Connector Location 15 ... Check Sliding Switch Circuit .................................. 67 .
CAN Communication System Description ............. 16 . Check Reclining Switch ......................................... 68 .
Revision: 2006 December SE-1 2006 FX35/FX45
Check Front Lifting Switch Circuit .......................... 70 . FRONT SEAT ...........................................................97.
Check Rear Lifting Switch Circuit .......................... 71 . Removal and Installation ........................................97 .
Check Power Seat Switch Ground Circuit ............. 72 . REMOVAL ......................................................... 100 .
Check Telescopic Switch Circuit ............................ 73 . INSTALLATION ................................................. 102 .
Check Tilt Switch Circuit ........................................ 75 . REMOVAL OF SEATBACK TRIM AND PAD .... 102 .
Check Door Mirror Remote Control Switch INSTALLATION OF SEATBACK TRIM AND PAD.103
(Changeover Switch) Circuit .................................. 77 . REMOVAL OF SEAT CUSHION TRIM AND PAD.103
Check Door Mirror Remote Control Switch (Mirror INSTALLATION OF SEAT CUSHION TRIM AND
Switch) Circuit ........................................................ 79
. PAD ................................................................... 104
.
Check Detention Switch (P Range Switch) Circuit... 81 REAR SEAT ............................................................ 105
.
Check Key Switch Circuit (With Intelligent Key) .... 82 . Removal and Installation ...................................... 105 .
Check Key Switch Circuit (Without Intelligent Key) 84 ... REMOVAL ......................................................... 107 .
Check Seat Memory Switch Circuit ....................... 85 . INSTALLATION ................................................. 107 .
Check Seat Memory Indicator Lamp Circuit .......... 87 . REMOVAL OF SEAT CUSHION TRIM AND PAD.107
Check UART Communication Line Circuit ............. 88 . INSTALLATION OF SEAT CUSHION TRIM AND
Check Lumbar Support Circuit .............................. 90 . PAD ................................................................... 108
.
POWER SEAT .......................................................... 92
. REMOVAL OF SEATBACK TRIM AND PAD .... 108 .
Wiring Diagram -- SEAT -- ................................... 92 . INSTALLATION OF SEATBACK TRIM AND PAD.108
HEATED SEAT ......................................................... 94
. REMOVAL OF REMOTE CONTROL LEVER ... 109 .
Description ............................................................. 94
. INSTALLATION OF REMOTE CONTROL
Wiring Diagram -- HSEAT -- ................................ 95 . LEVER .............................................................. 109
.
Revision: 2006 December SE-2 2006 FX35/FX45
PRECAUTIONS
PRECAUTIONS PFP:00001
A
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" NIS001UH
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front C
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING: D
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer. E
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section. F
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
G
Service Notice NIS001UI
q When removing or installing various parts, place a cloth or padding onto the vehicle body to prevent
scratches. H
q Handle trim, molding, instruments, grille, etc. carefully during removing or installing. Be careful not to oil or
damage them.
q Apply sealing compound where necessary when installing parts. SE
q When applying sealing compound, be careful that the sealing compound does not protrude from parts.
q When replacing any metal parts (for example body outer panel, members, etc.), be sure to take rust pre-
J
vention measures.
K
L
M
Revision: 2006 December SE-3 2006 FX35/FX45
PREPARATION
PREPARATION PFP:00002
Special Service Tools NIS001UJ
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
(Kent-Moore No.) Description
Tool name
(J39570)
Location the noise
Chassis ear
SIIA0993E
(J43980)
NISSAN Squeak and Rattle Repairing the cause of the noise
Kit
SIIA0994E
Commercial Service Tools NIS001UK
Tool name Description
Engine ear Location the noise
SIIA0995E
Revision: 2006 December SE-4 2006 FX35/FX45
SQUEAK AND RATTLE TROUBLE DIAGNOSES
SQUEAK AND RATTLE TROUBLE DIAGNOSES PFP:00000
A
Work Flow NIS0028M
B
C
D
E
F
SBT842
G
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diag- H
nostic Worksheet during the interview to document the facts and conditions when the noise occurs and any
customer's comments; refer to SE-9, "Diagnostic Worksheet" . This information is necessary to duplicate the
conditions that exist when the noise occurs.
SE
q The customer may not be able to provide a detailed description or the location of the noise. Attempt to
obtain all the facts and conditions that exist when the noise occurs (or does not occur).
q If there is more than one noise in the vehicle, be sure to diagnose and repair the noise that the customer
J
is concerned about. This can be accomplished by test driving the vehicle with the customer.
q After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so the customer, service adviser and technician are all speaking the same language when
defining the noise. K
q Squeak --(Like tennis shoes on a clean floor)
Squeak characteristics include the light contact/fast movement/brought on by road conditions/hard sur-
faces=higher pitch noise/softer surfaces=lower pitch noises/edge to surface=chirping L
q Creak--(Like walking on an old wooden floor)
Creak characteristics include firm contact/slow movement/twisting with a rotational movement/pitch
dependent on materials/often brought on by activity. M
q Rattle--(Like shaking a baby rattle)
Rattle characteristics include the fast repeated contact/vibration or similar movement/loose parts/missing
clip or fastener/incorrect clearance.
q Knock --(Like a knock on a door)
Knock characteristics include hollow sounding/sometimes repeating/often brought on by driver action.
q Tick--(Like a clock second hand)
Tick characteristics include gentle contacting of light materials/loose components/can be caused by driver
action or road conditions.
q Thump--(Heavy, muffled knock noise)
Thump characteristics include softer knock/dead sound often brought on by activity.
q Buzz--(Like a bumble bee)
Buzz characteristics include high frequency rattle/firm contact.
q Often the degree of acceptable noise level will vary depending upon the person. A noise that you may
judge as acceptable may be very irritating to the customer.
q Weather conditions, especially humidity and temperature, may have a great effect on noise level.
Revision: 2006 December SE-5 2006 FX35/FX45
SQUEAK AND RATTLE TROUBLE DIAGNOSES
DUPLICATE THE NOISE AND TEST DRIVE
If possible, drive the vehicle with the customer until the noise is duplicated. Note any additional information on
the Diagnostic Worksheet regarding the conditions or location of the noise. This information can be used to
duplicate the same conditions when you confirm the repair.
If the noise can be duplicated easily during the test drive, to help identify the source of the noise, try to dupli-
cate the noise with the vehicle stopped by doing one or all of the following:
1) Close a door.
2) Tap or push/pull around the area where the noise appears to be coming from.
3) Rev the engine.
4) Use a floor jack to recreate vehicle "twist".
5) At idle, apply engine load (electrical load, half-clutch on M/T model, drive position on A/T model).
6) Raise the vehicle on a hoist and hit a tire with a rubber hammer.
q Drive the vehicle and attempt to duplicate the conditions the customer states exist when the noise occurs.
q If it is difficult to duplicate the noise, drive the vehicle slowly on an undulating or rough road to stress the
vehicle body.
CHECK RELATED SERVICE BULLETINS
After verifying the customer concern or symptom, check ASIST for Technical Service Bulletins (TSBs) related
to that concern or symptom.
If a TSB relates to the symptom, follow the procedure to repair the noise.
LOCATE THE NOISE AND IDENTIFY THE ROOT CAUSE
1. Narrow down the noise to a general area. To help pinpoint the source of the noise, use a listening tool
(Chassis Ear: J-39570,Engine Ear and mechanics stethoscope).
2. Narrow down the noise to a more specific area and identify the cause of the noise by:
q removing the components in the area that you suspect the noise is coming from.
Do not use too much force when removing clips and fasteners, otherwise clips and fastener can be broken
or lost during the repair, resulting in the creation of new noise.
q tapping or pushing/pulling the component that you suspect is causing the noise.
Do not tap or push/pull the component with excessive force, otherwise the noise will be eliminated only
temporarily.
q feeling for a vibration with your hand by touching the component(s) that you suspect is (are) causing the
noise.
q placing a piece of paper between components that you suspect are causing the noise.
q looking for loose components and contact marks.
Refer to SE-7, "Generic Squeak and Rattle Troubleshooting" .
REPAIR THE CAUSE
q If the cause is a loose component, tighten the component securely.
q If the cause is insufficient clearance between components:
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo