Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Infiniti FX45 FX35 2006-2008 Approved FX45_35-S50-2007 tf

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
tf


>> Download tf documenatation <<

Text preview - extract from the document
TRANSFER


D DRIVELINE/AXLE

                                                                                                                                                             A


                                                                                                                                                             B
                                                                                                     SECTION
                                                                                                                        TRANSFER                             C


                                                                                                                                                             TF


                                                                                                                                                             E
                                                                 CONTENTS
PRECAUTIONS ......................................................... 3 .           AWD CONTROL UNIT INSPECTION TABLE .... 21                       .         F
 Precautions for Supplemental Restraint System                                    CONSULT-II Function (ALL MODE AWD/4WD) .... 22                    .
 (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-                                            FUNCTION ......................................................... 22
                                                                                                                                                    .
 SIONER" ................................................................. 3
                                                                        .           CONSULT-II SETTING PROCEDURE ............... 22                 .        G
 Precautions ............................................................. 3
                                                                        .           SELF-DIAG RESULT MODE .............................. 22         .
 Service Notice or Precautions ................................. 4      .           DATA MONITOR MODE ..................................... 24      .
PREPARATION .......................................................... 5.           ACTIVE TEST MODE ........................................ 25    .
                                                                                                                                                             H
 Special Service Tools .............................................. 5 .           AWD CONTROL UNIT PART NUMBER ............ 25                    .
 Commercial Service Tools ....................................... 7     .        TROUBLE DIAGNOSIS FOR SYSTEM ................... 26                .
NOISE, VIBRATION AND HARSHNESS (NVH)                                              Power Supply Circuit for AWD Control Unit ........... 26          .
TROUBLESHOOTING ............................................... 8       .           CONSULT-II REFERENCE VALUE IN DATA                                        I
 NVH Troubleshooting Chart .................................... 8       .           MONITOR MODE ............................................... 26 .
TRANSFER FLUID .................................................... 9   .           DIAGNOSTIC PROCEDURE ............................. 26           .
 Replacement ........................................................... 9
                                                                        .         AWD Control Unit .................................................. 27
                                                                                                                                                    .         J
   DRAINING ............................................................ 9
                                                                        .           DIAGNOSTIC PROCEDURE ............................. 27           .
   FILLING ................................................................ 9
                                                                        .         ABS System .......................................................... 27
                                                                                                                                                    .
 Inspection ................................................................ 9
                                                                        .           DIAGNOSTIC PROCEDURE ............................. 27           .
                                                                                                                                                             K
   FLUID LEAKAGE AND FLUID LEVEL ................. 9                    .         AWD Solenoid ....................................................... 28
                                                                                                                                                    .
AWD SYSTEM ......................................................... 10 .           CONSULT-II REFERENCE VALUE IN DATA
 Power Transfer Diagram ....................................... 10      .           MONITOR MODE ............................................... 28 .
 System Description ............................................... 10  .           DIAGNOSTIC PROCEDURE ............................. 28           .         L
   DESCRIPTION ................................................... 10   .           COMPONENT INSPECTION ............................. 30           .
   ELECTRIC CONTROLLED COUPLING .............11                         .         AWD Actuator Relay .............................................. 31
                                                                                                                                                    .
   AWD CONTROL UNIT ........................................11          .           CONSULT-II REFERENCE VALUE IN DATA                                       M
   AWD WARNING LAMP ...................................... 12           .           MONITOR MODE ............................................... 31 .
 System Diagram .................................................... 12 .           DIAGNOSTIC PROCEDURE ............................. 31           .
   COMPONENTS FUNCTION DESCRIPTION .... 13                              .         Engine Control Signal ............................................ 32
                                                                                                                                                    .
 CAN Communication ............................................. 13     .           DIAGNOSTIC PROCEDURE ............................. 32           .
   SYSTEM DESCRIPTION ................................... 13            .         CAN Communication Line ..................................... 32   .
TROUBLE DIAGNOSIS ........................................... 14        .           DIAGNOSTIC PROCEDURE ............................. 32           .
 Fail-Safe Function ................................................. 14.        TROUBLE DIAGNOSIS FOR SYMPTOMS ............. 33                    .
 How to Perform Trouble Diagnosis ....................... 14            .         AWD Warning Lamp Does Not Turn ON When The
   BASIC CONCEPT .............................................. 14      .         Ignition Switch Is Turned to ON ............................. 33  .
 Location of Electrical Parts .................................... 15   .           DIAGNOSTIC PROCEDURE ............................. 33           .
 Circuit Diagram ..................................................... 16
                                                                        .         AWD Warning Lamp Does Not Turn OFF Several
 Wiring Diagram -- AWD -- ................................... 17        .         Seconds after Engine Started ................................ 33  .
 Trouble Diagnosis Chart for Symptoms ................ 20               .           DIAGNOSTIC PROCEDURE ............................. 33           .
 AWD Control Unit Input/Output Signal Reference                                   Heavy Tight-Corner Braking Symptom Occurs
 Values ................................................................... 21
                                                                        .         When The Vehicle Is Driven and The Steering Wheel
                                                                                  Is Turned Fully to Either Side after The Engine Is


Revision: 2006 July                                                         TF-1                                                   2007 FX35/FX45
 Started ................................................................... 35
                                                                         .        REAR OIL SEAL ......................................................41
                                                                                                                                                     .
   DIAGNOSTIC PROCEDURE ............................. 35                 .         Removal and Installation ........................................41
                                                                                                                                                     .
 Vehicle Does Not Enter AWD Mode Even Though                                         REMOVAL ...........................................................41
                                                                                                                                                     .
 AWD Warning Lamp Turned to OFF ...................... 36                .           INSTALLATION ...................................................42
                                                                                                                                                     .
   DIAGNOSTIC PROCEDURE ............................. 36                 .        AIR BREATHER HOSE ............................................43   .
 While Driving, AWD Warning Lamp Flashes Rapidly                                   Removal and Installation ........................................43
                                                                                                                                                     .
 (When Flashing in Approx. 1 Minute and Then Turn-                                TRANSFER ASSEMBLY ..........................................44     .
 ing OFF) ................................................................ 37
                                                                         .         Removal and Installation ........................................44
                                                                                                                                                     .
 While Driving, AWD Warning Lamp Flashes Slowly                                      REMOVAL ...........................................................44
                                                                                                                                                     .
 (When Continuing to Flash until Turning Ignition                                    INSTALLATION ...................................................44
                                                                                                                                                     .
 Switch OFF) ........................................................... 37
                                                                         .         Disassembly and Assembly ...................................45    .
   DIAGNOSTIC PROCEDURE ............................. 37                 .           COMPONENTS ..................................................45 .
AWD CONTROL UNIT ............................................. 39        .           DISASSEMBLY ...................................................46
                                                                                                                                                     .
 Removal and Installation ....................................... 39     .           INSPECTION ......................................................51
                                                                                                                                                     .
   REMOVAL .......................................................... 39 .           ASSEMBLY .........................................................52
                                                                                                                                                     .
   INSTALLATION ................................................... 39   .        SERVICE DATA AND SPECIFICATIONS (SDS) .....59                      .
FRONT OIL SEAL .................................................... 40   .         General Specifications ...........................................59
                                                                                                                                                     .
 Removal and Installation ....................................... 40     .
   REMOVAL .......................................................... 40 .
   INSTALLATION ................................................... 40   .




Revision: 2006 July                                                          TF-2                                                   2007 FX35/FX45
                                             PRECAUTIONS

PRECAUTIONS                                                         PFP:00001
                                                                                                                        A
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER"                                                                                         NDS0009M


The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front C
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:                                                                                                             TF
q    To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
     in the event of a collision which would result in air bag inflation, all maintenance must be per-
     formed by an authorized NISSAN/INFINITI dealer.                                                                  E
q    Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
     sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
     Bag Module, see the SRS section.                                                                                 F
q    Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
     Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
     harness connectors.
                                                                                                                      G
Precautions                                                                                                  NDS0009N


q   Before connecting or disconnecting the AWD control unit
    harness connector, turn ignition switch "OFF" and discon-                                                           H
    nect battery ground cable. Because battery voltage is
    applied to AWD control unit even if ignition switch is turned
    "OFF".                                                                                                              I


                                                                                                                        J


                                                                                                          SEF289H
                                                                                                                        K
q   When connecting or disconnecting pin connectors into or
    from AWD control unit, take care not to damage pin termi-
    nals (bend or break).                                                                                               L
    When connecting pin connectors, make sure that there are
    no bends or breaks on AWD control unit pin terminal.
                                                                                                                        M




                                                                                                          SEF291H



q   Before replacing AWD control unit, perform AWD control
    unit input/output signal inspection and make sure whether
    AWD control unit functions properly or not. Refer to TF-21,
    "AWD Control Unit Input/Output Signal Reference Values" .




                                                                                                          SDIA1848E




Revision: 2006 July                                  TF-3                                       2007 FX35/FX45
                                            PRECAUTIONS

Service Notice or Precautions                                                                             NDS0009O


q   Do not reuse transfer fluid, once it has been drained.
q   Check the fluid level or replace the fluid only with the vehicle parked on level ground.
q   During removal or installation, keep inside of transfer clear of dust or dirt.
q   Replace all tires at the same time. Always use tires of the proper size and the same brand and pattern.
    Fitting improper size and unusual wear tires applies excessive force to vehicle mechanism and can cause
    longitudinal vibration.
q   Disassembly should be done in a clean work area, it is preferable to work in dustproof area.
q   Before proceeding with disassembly, thoroughly clean the transfer. It is important to prevent the internal
    parts from becoming contaminated by dirt or other foreign matter.
q   All parts should be carefully cleaned with a general purpose, non-flammable solvent before inspection or
    reassembly.
q   Check for the correct installation status prior to removal or disassembly. If matching marks are required,
    be certain they do not interfere with the function of the parts when applied.
q   Check appearance of the disassembled parts for damage, deformation, and unusual wear. Replace them
    with a new ones if necessary.
q   Gaskets, seals and O-rings should be replaced any time when the transfer is disassembled.
q   In principle, tighten bolts or nuts gradually in several steps working diagonally from inside to outside. If
    tightening sequence is specified, use it.
q   Observe the specified torque when assembling.
q   Clean and flush the parts sufficiently and blow-dry them.
q   Be careful not to damage sliding surfaces and mating surfaces.
q   Clean innerparts with lint-free cloth or towels. Do not use cotton work gloves and rags to prevent adhering
    fibers.




Revision: 2006 July                                 TF-4                                       2007 FX35/FX45
                                                       PREPARATION

PREPARATION                                                                                                                    PFP:00002
                                                                                                                                             A
Special Service Tools                                                                                                             NDS0009P

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
  Tool number                                                                                                                                B
  (Kent-Moore No.)                                                                       Description
  Tool name

  ST27862000                                                                             q   Installing front oil seal
                                                                                                                                             C
  (     --   )
  Drift
  a: 62.5 mm (2.461 in) dia.
  b: 42 mm (1.65 in) dia.                                                                                                                    TF

                                                                        ZZA0194D


  KV381054S0                                                                             q   Removing rear oil seal
                                                                                                                                             E
  (J-34286)
  Puller
                                                                                                                                              F


                                                                        ZZA0601D
                                                                                                                                             G
  ST30720000                                                                             q   Installing rear oil seal
  (J-25405)                                                                              q   Installing mainshaft oil seal
  Drift
                                                                                                                                             H
  a: 77 mm (3.03 in) dia.
  b: 55.5 mm (2.185 in) dia.

                                                                                                                                              I
                                                                        ZZA0811D


  KV40104830                                                                             q   Installing rear oil seal
  (     --   )
  Drift                                                                                                                                       J
  a: 70 mm (2.76 in) dia.
  b: 63.5 mm (2.500 in) dia.
                                                                                                                                             K
                                                                        ZZA1003D


  KV38100300                                                                             q   Removing mainshaft bearing
  (J-25523)                                                                                                                                   L
  Drift
  a: 54 mm (2.13 in) dia.
  b: 46 mm (1.81 in) dia.
  c: 32 mm (1.26 in) dia.
                                                                                                                                             M

                                                                        ZZA1046D


  ST33052000                                                                             q   Removing mainshaft assembly
  (     --   )
  Drift
  a: 28 mm (1.10 in) dia.
  b: 22 mm (0.87 in) dia.


                                                                        ZZA1000D


  ST30611000                                                                             q   Removing rear bearing
  (J-25742-1)
  Drift bar
  a: 350 mm (1.10 in)
  b: 25 mm (1.10 in) dia.
  c: M12 



◦ Jabse Service Manual Search 2022 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo