Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Infiniti M45 Y34 2003-2004 Approved M45-Y34-2004 lu

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download lu documenatation <<

Text preview - extract from the document

ENGINE LUBRICATION SYSTEM

B ENGINE

ENGINE LUBRICATION SYSTEM
SECTION LU LU

E
CONTENTS
PRECAUTIONS ......................................................... 2. OIL FILTER ................................................................ 9
. F
Precautions for Liquid Gasket ................................. 2 . Removal and Installation ......................................... 9 .
REMOVAL OF LIQUID GASKET SEALING ......... 2 . REMOVAL ............................................................ 9
.
LIQUID GASKET APPLICATION PROCEDURE 2 ..... INSTALLATION .................................................... 9. G
PREPARATION .......................................................... 3
. INSPECTION AFTER INSTALLATION ................. 9 .
Special Service Tools .............................................. 3. OIL PUMP ................................................................ 10
.
Commercial Service Tools ....................................... 3 . Removal and Installation ....................................... 10 .
H
LUBRICATION SYSTEM ........................................... 4 . REMOVAL .......................................................... 10
.
Lubrication Circuit ................................................... 4
. INSTALLATION .................................................. 10 .
System Drawing ...................................................... 5
. INSPECTION AFTER INSTALLATION ............... 10 .
ENGINE OIL .............................................................. 6
. Disassembly and Assembly ................................... 11 . I
Inspection ................................................................ 6
. DISASSEMBLY .................................................. 11 .
ENGINE OIL LEVEL ............................................ 6 . INSPECTION AFTER DISASSEMBLY ............... 11 .
OIL APPEARANCE .............................................. 6 . ASSEMBLY ........................................................ 12
. J
OIL LEAKAGE ...................................................... 6. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 13 .
OIL PRESSURE CHECK ..................................... 6 . Standard and Limit ................................................. 13
.
Changing Engine Oil ............................................... 7 . OIL PRESSURE ................................................. 13 .
K
OIL PUMP .......................................................... 13
.
REGULATOR VALVE ......................................... 13 .
ENGINE OIL CAPACITY (APPROXIMATELY) ... 13
Tightening Torque .................................................. 13
. L

Revision: 2004 October LU-1 2004 M45
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Liquid Gasket ABS000P2

REMOVAL OF LIQUID GASKET SEALING
q After removing the mounting bolts and nuts, separate the mating
surface using the seal cutter (SST) and remove the liquid gasket
sealing.
CAUTION:
Be careful not to damage the mating surfaces.
q In areas where the seal cutter (SST) is difficult to use, use a
plastic hammer to lightly tap (1) the seal cutter where the liquid
gasket is applied. Use a plastic hammer to slide the seal cutter
(2) by tapping on the side.
CAUTION:
If for some unavoidable reason a tool such as a flat-bladed PBIC0002E

screwdriver is used, be careful not to damage the mating
surfaces.
LIQUID GASKET APPLICATION PROCEDURE
1. Using a scraper, remove the old liquid gasket adhering to the
gasket application surface and the mating surface.
q Remove the liquid gasket completely from the groove of the
liquid gasket application surface, mounting bolts, and bolt
holes.
2. Wipe the gasket application surface and the mating surface
removing any adhering moisture, grease and foreign material.

PBIC0003E

3. Attach the liquid gasket tube to the tube presser (SST).
Use Genuine RTV Silicone Sealant or equivalent. Refer to
GI-46, "RECOMMENDED CHEMICAL PRODUCTS AND SEAL-
ANTS".
4. Apply the liquid gasket without breaks to the specified location
with the specified dimensions.
q If there is a groove for the liquid gasket application, apply the
liquid gasket to the groove.

PBIC2160E

q As for the bolt holes, normally apply the gasket inside the
holes. Occasionally, it should be applied outside the holes.
Make sure to read the text of this manual.
q Within five minutes of liquid gasket application, install the mat-
ing component.
q If the liquid gasket protrudes, wipe it off immediately.

q Do not retighten after the installation.

q Wait 30 minutes or more after installation before refilling the
engine with oil and coolant.
CAUTION: SEM159F
If there are specific instructions in this manual, observe
them.

Revision: 2004 October LU-2 2004 M45
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools ABS000M7

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number LU
(Kent-Moore No.) Description
Tool name

ST25051001 Measuring oil pressure
C
(J25695-1) Maximum measuring range:
Oil pressure gauge 2,452 kPa (25 kg/cm2 , 356 psi)

S-NT050

ST25052000 Adapting oil pressure gauge to cylinder block
E
(J25695-2)
Hose
F

S-NT559
G
KV10115801 Removing and installing oil filter
(J38956) a : 64.3 mm (2.531 in)
Oil filter wrench
H

I
S-NT375

WS39930000 Pressing the tube of liquid gasket
( -- )
Tube presser J

K
S-NT052

Commercial Service Tools ABS000M8
L
Tool name Description

Power tool Loosening bolts and nuts M

PBIC0190E

Deep socket Removing and installing oil pressure switch
Deep socket 27mm (1.06in)

NT818

Revision: 2004 October LU-3 2004 M45
LUBRICATION SYSTEM

LUBRICATION SYSTEM PFP:15010

Lubrication Circuit ABS000M9

PBIC0133E

Revision: 2004 October LU-4 2004 M45
LUBRICATION SYSTEM

System Drawing ABS000MA

L
PBIC0134E

Revision: 2004 October LU-5 2004 M45
ENGINE OIL

ENGINE OIL PFP:KLA92

Inspection ABS000MB

ENGINE OIL LEVEL
NOTE:
Before starting engine, check the engine oil level. If engine is already started, stop it and allow 15 minutes
before checking.
1. Put vehicle horizontally.
2. Pull out oil level gauge and wipe it clean.
3. Insert oil level gauge and check that the engine oil level is within
the range shown in the figure.
4. If it is out of range, adjust it.

PBIC0801E

OIL APPEARANCE
q Check engine oil for a white milky appearance or excessive contamination.
q If engine oil is milky, it is highly probable that it is contaminated with engine coolant. Repair the broken
parts.
OIL LEAKAGE
Check for oil leakage around the following area.
q Oil pan
q Oil pan drain plug
q Oil pressure switch
q Oil filter
q Intake valve timing control cover
q Intake valve timing control solenoid valve
q Front cover
q Mating surface between cylinder block and cylinder head
q Mating surface between cylinder head and rocker cover
q Crank oil seal (front and rear)
OIL PRESSURE CHECK
WARNING:
q Be careful not to burn yourself, as engine oil is hot.
q Oil pressure check should be done in "Parking position".
1. Check engine oil level. Refer to LU-6, "ENGINE OIL LEVEL" .
2. Remove engine undercover with power tool.
3. Disconnect oil pressure switch harness connector.
4. Remove oil pressure switch using the deep socket (commercial
service tool).

PBIC0136E

Revision: 2004 October LU-6 2004 M45
ENGINE OIL

5. Install oil pressure gauge and hose [SST].
A

SLC926
D
6. After warming up engine, check that oil pressure corresponding to the engine speed is produced.
NOTE:
When engine oil temperature is low, the engine oil pressure becomes high. E
Engine oil pressure [Oil temperature is 80

◦ Jabse Service Manual Search 2025 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo