Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Infiniti Q45 FY33 F50 2001-2006 Approved 2006_Q45 rax
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download rax documenatation <<Text preview - extract from the documentREAR AXLE
D DRIVELINE/AXLE
A
SECTION RAX REAR AXLE
B
C
RAX
E
CONTENTS
PRECAUTIONS ......................................................... 2 . INSTALLATION .................................................... 6 . F
Caution .................................................................... 2
. Disassembly and Assembly ..................................... 6 .
PREPARATION .......................................................... 3. DISASSEMBLY .................................................... 6 .
Special Service Tools (SST) .................................... 3 . INSPECTION AFTER DISASSEMBLY ................. 7 . G
Commercial Service Tools ....................................... 3 . ASSEMBLY .......................................................... 7
.
NOISE, VIBRATION AND HARSHNESS (NVH) INSPECTION AFTER ASSEMBLY ....................... 8 .
TROUBLESHOOTING ............................................... 4 . REAR DRIVE SHAFT ................................................ 9 .
H
NVH Troubleshooting Chart .................................... 4 . Removal and Installation ......................................... 9 .
WHEEL HUB ............................................................. 5
. REMOVAL ............................................................ 9
.
On-Vehicle Inspection and Service ......................... 5 . INSPECTION AFTER REMOVAL ........................ 9 .
WHEEL BEARING INSPECTION ........................ 5 . INSTALLATION .................................................... 9 . I
Removal and Installation ......................................... 5 . Disassembly and Assembly ................................... 10 .
COMPONENT ...................................................... 5 . DISASSEMBLY .................................................. 10 .
REMOVAL ............................................................ 5
. INSPECTION AFTER DISASSEMBLY ............... 11 . J
INSPECTION AFTER REMOVAL ........................ 6 . ASSEMBLY ........................................................ 12.
SERVICE DATA AND SPECIFICATIONS (SDS) ..... 15 .
Wheel Bearing ....................................................... 15
.
K
Drive Shaft ............................................................. 15
.
L
M
Revision: 2005 November RAX-1 2006 Q45
PRECAUTIONS
PRECAUTIONS PFP:00001
Caution NDS0006J
Observe the following precautions when disassembling and assembling drive shaft.
q Perform work in a location which is as dust-free as possible.
q Before disassembling and assembling, clean the outside of parts.
q Prevention of entry of foreign objects must be taken into account during disassembly of the service loca-
tion.
q Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean
cover must be placed over parts.
q Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adher-
ing to parts.
q Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by
blowing with air or wiping with paper shop cloths.
Revision: 2005 November RAX-2 2006 Q45
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools (SST) NDS0006K
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
B
(Kent-Moore No.) Description
Tool name
C
ST33220000
( -- ) q Removing wheel hub
Drift q Removing wheel bearing outer side inner RAX
a: 32 mm (1.26 in) dia. race
b: 21 mm (0.83 in) dia.
ZZA0539D
E
ST33251000 F
( -- ) Installing wheel hub
Drift
G
ZZA0982D
ST35300000 H
( -- )
Drift Installing wheel hub
a: 45 mm (1.77 in) dia.
b: 59 mm (2.32 in) dia. I
ZZA0881D
J
KV38100500
( -- )
Drift Installing drive shaft plug
a: 80 mm (3.15 in) dia K
b: 60 mm (2.36 in) dia
ZZA0701D
L
KV38102200
( -- )
Drift Installing drive shaft plug M
a: 90 mm (3.54 in) dia
b: 31 mm (1.22 in) dia
ZZA0920D
Commercial Service Tools NDS0006L
Tool name Description
q Removing wheel nuts
Power tool
q Removing brake caliper assembly
PBIC0190E
Revision: 2005 November RAX-3 2006 Q45
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING PFP:00003
NVH Troubleshooting Chart NDS0006M
Use chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
Refer to DRIVE SHAFT in this chart.
Refer to REAR AXLE in this chart.
NVH in RAX and RSU sections.
NVH in RFD section.
NVH in WT section.
NVH in WT section.
NVH in BR section.
NVH in PR section.
NVH in PS section.
RAX-11
RAX-5
--
--
--
Reference page
REAR AXLE AND REAR SUSPENSION
Improper installation, looseness
Joint sliding resistance
PROPELLER SHAFT
Excessive joint angle
Possible cause and SUSPECTED PARTS
Parts interference
ROAD WHEELS
DIFFERENTIAL
DRIVE SHAFT
REAR AXLE
STEERING
Imbalance
BRAKES
TIRES
DRIVE Noise
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo