Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Infiniti Q45 FY33 F50 2001-2006 Approved 2003_Q45 rax
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download rax documenatation <<Text preview - extract from the documentREAR AXLE
D DRIVELINE/AXLE
A
B
SECTION
REAR AXLE C
RAX
E
CONTENTS
PRECAUTIONS ......................................................... 2. REAR DRIVE SHAFT ................................................ 9 . F
Cautions .................................................................. 2
. Removal and Installation ......................................... 9 .
PREPARATION .......................................................... 3
. REMOVAL ............................................................ 9
.
Special Service Tools .............................................. 3. INSPECTION AFTER REMOVAL ........................ 9 . G
Commercial Service Tools ....................................... 3 . INSTALLATION .................................................... 9 .
NOISE, VIBRATION AND HARSHNESS (NVH) Disassembly and Assembly ................................... 10 .
TROUBLESHOOTING ............................................... 4 . DISASSEMBLY .................................................. 10 .
H
NVH Troubleshooting Chart .................................... 4 . INSPECTION AFTER DISASSEMBLY ............... 11 .
WHEEL HUB ............................................................. 5
. ASSEMBLY ........................................................ 12.
On-Vehicle Inspection and Service ......................... 5 . SERVICE DATA ....................................................... 15.
WHEEL BEARING INSPECTION ........................ 5 . Wheel Bearing ....................................................... 15
. I
Removal and Installation ......................................... 5 . Drive Shaft ............................................................. 15
.
REMOVAL ............................................................ 5
. Z100D90F .......................................................... 15
.
INSPECTION AFTER REMOVAL ........................ 6 . Tightening Torque .................................................. 15
. J
INSTALLATION .................................................... 6 .
Disassembly and Assembly .................................... 6 .
DISASSEMBLY .................................................... 6 .
K
INSPECTION AFTER DISASSEMBLY ................ 7 .
ASSEMBLY .......................................................... 7
.
INSPECTION AFTER ASSEMBLY ...................... 8 .
L
M
Revision; 2004 April RAX-1 2003 Q45
PRECAUTIONS
PRECAUTIONS PFP:00001
Cautions EDS000WJ
Observe the following precautions when disassembling and servicing drive shaft.
q Perform work in a location which is as dust-free as possible.
q Before disassembling and servicing, clean the outside of parts.
q Disassembly and service location must be taken to prevent the entry of foreign objects.
q Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean
cover must be placed over parts.
q Paper shop cloth must be used. Fabric shop cloths must not be used because of the danger of lint adher-
ing to parts.
q Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by
blowing with air or wiping with paper shop cloths.
Revision; 2004 April RAX-2 2003 Q45
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools EDS000WK
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
B
(Kent-Moore No.) Description
Tool name
C
ST3306 1000
(J8107-2)
Drift Removing wheel bearing outer side inner race RAX
a: 28.5 mm (1.12 in) dia.
b: 38.0 mm (1.50 in) dia.
ZZA0969D
E
KV381 00500
( -- ) F
Drift Installing drive shaft plug
a: 80 mm (3.15 in) dia
b: 60 mm (2.36 in) dia
G
ZZA0701D
KV381 02200 H
( -- )
Drift Installing drive shaft plug
a: 90 mm (3.54 in) dia
b: 31 mm (1.22 in) dia I
ZZA0920D
Commercial Service Tools EDS000WL
J
Tool name Description
K
q Removing wheel nuts
Power tool
q Removing brake caliper assembly
L
PBIC0190E
M
Revision; 2004 April RAX-3 2003 Q45
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING PFP:00003
NVH Troubleshooting Chart EDS000WM
Use chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
Refer to DRIVE SHAFT in this chart.
Refer to REAR AXLE in this chart.
NVH in FAX and FSU sections.
RAX-11
RAX-5
NVH in RFD section.
NVH in WT section.
NVH in WT section.
NVH in PR section.
NVH in BR section.
--
--
--
NVH in PS section.
Reference page
FRONT AXLE AND FRONT SUSPENSION
Improper installation, looseness
Joint sliding resistance
Possible cause and SUSPECTED PARTS
PROPELLER SHAFT
Excessive joint angle
Parts interference
DIFFERENTIAL
ROAD WHEEL
DRIVE SHAFT
REAR AXLE
STEERING
Imbalance
BRAKES
TIRES
DRIVE Noise
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo