Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Infiniti QX56 JA60 2004-2005 Approved 2005_QX56 acc
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download acc documenatation <<
Text preview - extract from the document
B ENGINE
A
ACCELERATOR CONTROL SYSTEM
SECTION ACC ACC
C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . F
Removal and Installation ......................................... 2
. Accelerator Control .................................................. 4
.
REMOVAL ............................................................ 2
. ADJUSTABLE ACCELERATOR PEDAL .............. 4 .
INSTALLATION .................................................... 3
. G
INSPECTION AFTER INSTALLATION ................ 3 .
H
I
J
K
L
M
Revision: October 2005 ACC-1 2005 QX56
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Removal and Installation EBS00M3Z
Adjustable Accelerator Pedal
LBIA0379E
1. Adjustable accelerator pedal assem- 2. A/T control cable mounting bracket (part 3. Adjustable pedal electric motor (part
bly of the accelerator pedal assembly) of the accelerator pedal assembly)
4. Adjustable brake pedal cable (part
of the accelerator pedal assembly)
CAUTION:
G Do not disassemble the accelerator pedal adjusting mechanism.
G Before removal and installation the accelerator and brake pedals must be in the frontmost posi-
tion. This is to align the base position of the accelerator and brake pedals.
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
REMOVAL
1. Move the accelerator and brake pedals to the frontmost position.
2. Turn the ignition switch OFF and disconnect the negative battery terminal.
3. Disconnect the adjustable brake pedal cable from the adjustable brake pedal.
G Unlock, then pull the adjustable brake pedal cable to disconnect it from the adjustable brake pedal.
Revision: October 2005 ACC-2 2005 QX56
ACCELERATOR CONTROL SYSTEM
4. Disconnect the adjustable pedal electric motor electrical connec-
tor. A
5. Disconnect the adjustable pedal electric motor memory electri-
cal connector, if equipped.
6. Disconnect the accelerator position sensor electrical connector. ACC
7. Remove the two upper and one lower accelerator pedal nuts.
8. Remove the adjustable accelerator pedal assembly.
C
LBIA0380E
D
INSTALLATION
Installation is in the reverse order of removal.
INSPECTION AFTER INSTALLATION E
G Check that the accelerator pedal moves smoothly within the specified ranges.
Adjustable accelerator pedal ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo