Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Jeep Cherokee XJ 1997.1999-2001 Approved 1999 XJ Jeep Cherokee EXJ_13
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download EXJ_13 documenatation <<Text preview - extract from the documentXJ FRAME AND BUMPERS 13 - 1
FRAME AND BUMPERS
CONTENTS
page page
BUMPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
BUMPERS
INDEX
page page
REMOVAL AND INSTALLATION REAR BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FRONT BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . 1 REAR BUMPER END CAP . . . . . . . . . . . . . . . . . . 2
FRONT BUMPER END CAP . . . . . . . . . . . . . . . . . 1 REAR TOW HOOK . . . . . . . . . . . . . . . . . . . . . . . . 4
FRONT TOW HOOK . . . . . . . . . . . . . . . . . . . . . . . 2
REMOVAL AND INSTALLATION FRONT BUMPER
FRONT BUMPER END CAP REMOVAL
(1) Remove bumper end caps.
REMOVAL (2) If equipped, disengage fog lamp wire harness
(1) Remove the rivet attaching the end cap to the connectors.
air deflector. (3) Disconnect vacuum line from reservoir (Fig. 3).
(2) Remove the bolts and nuts attaching the end (4) Remove Torx-head bolts that attach bumper to
cap to the bumper (Fig. 1). mounting brackets (Fig. 1).
(3) Pull back the wheelhouse liner and remove the (5) Remove bumper from vehicle.
screws attaching the end cap to the front fender. (6) If necessary, remove bolts attaching bumper
(4) Lifting the end cap from the bottom, tilt mounting brackets to frame.
slightly upward and slide it outward to disengage the
retainer tab from the bumper (Fig. 2). INSTALLATION
(5) Separate the end cap from the bumper. (1) If removed, install bolts attaching bumper
mounting brackets to frame. Tighten bolts to 55 N
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo