Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Jeep Cherokee XJ 1997.1999-2001 Approved 1999 XJ Jeep Cherokee EXJ_8CA

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download EXJ_8CA documenatation <<

Text preview - extract from the document

XJ                                                                                               CHARGING SYSTEM                8C - 1



                                            CHARGING SYSTEM
                                                         CONTENTS

                                                           page                                                                  page

GENERAL INFORMATION                                                 REMOVAL AND INSTALLATION
 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1    GENERATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

GENERAL INFORMATION                                                 REMOVAL
                                                                      (1) Disconnect the negative battery cable.
INTRODUCTION                                                          (2) Remove the accessory drive belt. Refer to
  The generator assembly is serviced as a complete                  Group 7, Cooling System for procedure.
assembly. If the generator should be faulty, replace                  (3) Remove the nut securing battery output cable
the entire assembly. The only serviceable part is the               to B+ terminal (Fig. 1) at rear of generator.
drive pulley.


REMOVAL AND INSTALLATION
GENERATOR
WARNING: DISCONNECT NEGATIVE CABLE FROM
BATTERY BEFORE REMOVING BATTERY OUTPUT
WIRE FROM GENERATOR. FAILURE TO DO SO
CAN RESULT IN INJURY.


CAUTION: Never force a belt over a pulley rim
using a screwdriver. The synthetic fiber of the belt
can be damaged.


CAUTION: When installing a serpentine accessory
drive belt, the belt must be routed correctly. The
water pump will be rotating in the wrong direction if
the belt is installed incorrectly, causing the engine
to overheat. Refer to belt routing label in engine
compartment, or refer to Belt Schematics in Group                                   Fig. 1 Generator Terminals
7, Cooling System.
8C - 2    CHARGING SYSTEM                                                                          XJ
REMOVAL AND INSTALLATION (Continued)
  (4) Unplug the field terminal connector (Fig. 1) at
rear of generator.
  (5) Remove the upper generator mounting bolt
(Fig. 2).




                                                                    Fig. 3 Generator Mounting




             Fig. 2 Generator Mounting
  (6) Remove the lower generator mounting bolt
(Fig. 2) and remove generator from the vehicle.

INSTALLATION
  (1) Install the generator into the generator
bracket.
  (2) Install the lower generator mounting bolt (Fig.
3).
  (3) Install the upper generator mounting bolt (Fig.
3).
  (4) Tighten the mounting bolts to proper torque.
  

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo