Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Mitsubishi Lancer Evolution 2003-2005 Approved Mitsubishi Lancer Evolution 2003 BM GR00000600-4

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download GR00000600-4 documenatation <<

Text preview - extract from the document

                                                                                                     4-1


                                                  GROUP 4


                             CORROSION
                             PROTECTION
                                                  CONTENTS

BODY SEALING LOCATIONS . . . . .                   4-2   UNDERBODY ANTICORROSION
                                                         AGENT LOCATIONS . . . . . . . . . . . . .   4-7
UNDERCOAT APPLICATION
LOCATIONS . . . . . . . . . . . . . . . . . . .    4-6
4-2                                             CORROSION PROTECTION
                                                BODY SEALING LOCATIONS

                                  BODY SEALING LOCATIONS
                                                                                                      M4040001000138
If the sealant application is directly visible on the        NOTE: The bold dotted line indicates the application
outer plate and requires appearance quality of the           area on the rear.
application in areas such as the drip rail, pillar, clinch
and so on, then apply the sealant so that it is flat, or
wipe off any excess mounding after the application.
Be careful not to obstruct the water draining hole.
.




FLOOR



                                         1                   2
                                                                                                3




                                                    4



                                                                                                       AB202132AB


UPPER BODY




                          5



                                                                                                          7



                              6
                                                                                                      AB202133AB




                                     TSB Revision
                        CORROSION PROTECTION
                         BODY SEALING LOCATIONS
                                                                     4-3
SIDE BODY




                                                                         12
            8

                                                       11
                9                                 10           AB202134 AB

  1                                     2




                        AB202135AB                          AB202136AB


  3                                     4




                        AB202137AB                          AB202138AB




                    TSB Revision
4-4           CORROSION PROTECTION
               BODY SEALING LOCATIONS

  5                        6




          AB202139AB                    AB202140AB


  7                        8




          AB202141AB                    AB202142AB


  9                       10




          AB202143AB                    AB202144AB


 11                       12




          AB202145AB                    AB202146AB



      TSB Revision
                CORROSION PROTECTION
                 BODY SEALING LOCATIONS
                                                     4-5

HOOD                           FRONT DOOR




                AB202131AB                  AB202147AB


REAR DOOR                      TRUNK LID




                AB202148 AB                 AB202149AB




            TSB Revision
4-6                                           CORROSION PROTECTION
                                        UNDERCOAT APPLICATION LOCATIONS

                 UNDERCOAT APPLICATION LOCATIONS
                                                                                                  M4040003000112
The under parts of the body is undercoated for anti-      Tape the areas marked with an asterisks to protect
corrosive, anti-rust, anti-chipping, and anti-vibration   those areas from getting any undercoating on those
performance.                                              areas.
After correcting the body, restore as shown in the
instructions of the figure, if necessary.



                               *                                      *      *                *




                                *                                    *      *

      : UNDERCOAT [FILM THICKNESS IS AT LEAST 0.5 mm (0.02 inch)]                                 AB202123AB




                                    TSB Revision
                                         CORROSION PROTECTION
                              UNDERBODY ANTICORROSION AGENT LOCATIONS
                                                                                                            4-7
     UNDERBODY ANTICORROSION AGENT LOCATIONS
                                                                                                     M4040009000024
In order to provide a greater corrosion resistance,        NOTE: .
underbody corrosion prevention treatment should be          

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo