Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2006-2009 Approved Nissan Maxima 2006 ACC

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
ACC

>> Download ACC documenatation <<

Text preview - extract from the document

B ENGINE

ACC
SECTION
ACCELERATOR CONTROL SYSTEM C

E
CONTENTS
PRECAUTIONS ......................................................... 2
. ACCELERATOR CONTROL SYSTEM ...................... 3 . F
Precautions for Supplemental Restraint System Removal and Installation ......................................... 3
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- REMOVAL ............................................................ 3
.
SIONER" ................................................................. 2
. INSTALLATION .................................................... 3
. G
SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 .
Accelerator Control .................................................. 4
.
PEDAL TRAVEL ................................................... 4
.
H

Revision: October 2006 ACC-1 2006 Maxima
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EBS00RBM

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.

Revision: October 2006 ACC-2 2006 Maxima
ACCELERATOR CONTROL SYSTEM

ACCELERATOR CONTROL SYSTEM PFP:18005
A
Removal and Installation EBS00JTF

REMOVAL
1. Disconnect the negative battery cable.
ACC
2. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
C
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
D

E
LBIA0333E

3. Remove the upper accelerator pedal nuts and lower accelerator F
pedal bolt.
4. Remove the accelerator pedal and accelerator position sensor
assembly.
G
q For electrical inspection of the accelerator pedal position sen-
sor, refer to EC-604, "ACCELERATOR PEDAL POSITION
SENSOR" .
H
CAUTION:
q Do not disassemble the pedal assembly. Do not remove
the accelerator pedal position sensor from the pedal
assembly. LBIA0334E I
q Avoid impact from dropping during handling.

q Keep the pedal assembly away from water.
J
INSTALLATION
1. Installation is in the reverse order of removal.
q Check the accelerator pedal for smooth operation. There should be no binding or sticking when apply- K
ing or releasing the accelerator pedal.
q Check that the accelerator pedal moves through the full spec-
ified distance of pedal travel. L
Pedal travel A : 52.6 - 58.2 mm (2.07 - 2.29 in)
CAUTION:
When the harness connector of the accelerator pedal posi- M
tion sensor is disconnected, perform the "Accelerator pedal
released position learning". Refer to EC-79, "Accelerator
Pedal Released Position Learning" .

LBIA0062E

Revision: October 2006 ACC-3 2006 Maxima
SERVICE DATA AND SPECIFICATIONS (SDS)

SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030

Accelerator Control EBS00JTG

PEDAL TRAVEL
Accelerator control pedal - total travel 52.6 - 58.2 mm (2.07 - 2.29 in)

Revision: October 2006 ACC-4 2006 Maxima

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo