Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2006-2009 Approved Nissan Maxima 2006 PB
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download PB documenatation <<
Text preview - extract from the document
F BRAKES
A
B
SECTION
PARKING BRAKE SYSTEM C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2. PARKING BRAKE SHOE .......................................... 7 . PB
Precautions for Supplemental Restraint System Removal and Installation ......................................... 7 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- REMOVAL ............................................................ 7
.
SIONER" ................................................................. 2
. INSTALLATION .................................................... 7 . G
PREPARATION .......................................................... 3
. Inspection ................................................................ 8
.
Commercial Service Tools ....................................... 3 . Adjustment ............................................................... 8
.
PARKING BRAKE SYSTEM ..................................... 4 . SHOE CLEARANCE ............................................ 8 .
H
Components ............................................................ 4
. Breaking-in Drum and Lining ................................... 9 .
Removal and Installation ......................................... 4 . SERVICE DATA AND SPECIFICATIONS (SDS) ..... 10 .
REMOVAL ............................................................ 4
. Parking Brake Control ........................................... 10 .
INSTALLATION .................................................... 5 . Parking Drum Brake .............................................. 10 . I
Inspection ................................................................ 5
.
Adjustment .............................................................. 5
.
J
K
L
M
Revision: October 2006 PB-1 2006 Maxima
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EFS00684
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Revision: October 2006 PB-2 2006 Maxima
PREPARATION
PREPARATION PFP:00002
A
Commercial Service Tools EFS00685
Tool name Description
Power tool Removing fasteners B
C
PBIC0190E
D
E
PB
G
H
I
J
K
L
M
Revision: October 2006 PB-3 2006 Maxima
PARKING BRAKE SYSTEM
PARKING BRAKE SYSTEM PFP:36010
Components EFS004DY
WFIA0560E
1. Control lever 2. Control lever finisher 3. Cable assembly
4. Grommet 5. Front cable 6. Adjusting nut
Removal and Installation EFS004DZ
REMOVAL
1. Remove center console. Refer to IP-17, "Front Center Console".
2. Disconnect warning lamp connector.
3. Remove all parking brake cable nuts and bolts, loosen and
remove adjusting nut.
WFIA0096E
4. Remove the rear disc rotor. Refer to BR-30, "Removal and Installation of Caliper Assembly and Disc
Rotor".
Revision: October 2006 PB-4 2006 Maxima
PARKING BRAKE SYSTEM
5. Remove the lock plate bolt.
6. Remove the pin, then the parking brake cable. A
B
C
D
E
PB
G
LFIA0093E
INSTALLATION
Installation is in the reverse order of removal. H
q Adjust the parking brake cable. Refer to PB-5, "Adjustment" .
CAUTION:
Do not reuse adjusting nut. I
Inspection EFS004E0
q Check control lever for wear or other damage. Replace if necessary. J
q Check wires for discontinuity or deterioration. Replace if necessary.
q Check warning lamp and switch. Replace if necessary.
q Check parts at each connecting portion and, if found deformed or damaged, replace. K
q Check if the control lever stroke is within specification. Refer to PB-5, "Adjustment" .
Adjustment EFS004E1 L
1. Remove control lever finisher from the center console.
2. Fully engage the control lever.
3. Loosen the parking brake cable adjusting nut and fully release M
the control lever.
4. Adjust clearance of the rear parking brake shoes. Refer to PB-
8, "SHOE CLEARANCE" .
5. Depress the brake pedal fully more than five times.
6. Make sure that no drag exists while rotating the rear wheels.
7. Operate control lever 10 times or more with a full stroke [216
mm (8.5 in)].
8. Adjust control lever by turning adjusting nut.
9. Pull control lever with specified amount of force. Check control WFIA0095E
lever stroke and ensure smooth operation.
Lever stroke (num- :7-8
ber of notches)
Force : 196 N (20 kg-f, 44 lb-f)
Revision: October 2006 PB-5 2006 Maxima
PARKING BRAKE SYSTEM
10. After adjustment, check that there is no drag while the control lever is being released. If drag exists, per-
form the following:
q Remove the rear disc rotor, refer to BR-30, "Removal and
Installation of Caliper Assembly and Disc Rotor" . Verify the
toggle lever returns to stopper when the parking brake lever is
released.
LFIA0095E
q If toggle lever does not return to stopper, loosen adjusting nut.
q Install rear disc rotor and adjust shoe clearance. Refer to PB-
8, "SHOE CLEARANCE" .
LFIA0094E
Revision: October 2006 PB-6 2006 Maxima
PARKING BRAKE SHOE
PARKING BRAKE SHOE PFP:44060
A
Removal and Installation EFS004E2
REMOVAL
WARNING: B
Clean brakes with a vacuum dust collector to minimize the hazard of airborne particles or other mate-
rials.
1. Remove the wheel and tire. Refer to WT-5, "WHEEL AND TIRE ASSEMBLY" .
C
2. Remove the brake rotor with the parking brake lever completely disengaged.
3. If the brake rotor cannot be removed, remove as follows:
a. Secure the brake rotor with the wheel nut and remove the D
adjuster hole plug.
b. Insert a flat-bladed screwdriver through the plug opening and
rotate the star wheel on the adjuster assembly in the direction as E
shown to retract the parking brake shoes.
4. Remove the parking brake shoe springs.
5. Remove the parking brake shoes and adjuster. PB
WFIA0018E G
INSTALLATION
Installation is in the reverse order of removal noting the following:
H
q Apply brake grease to the contact areas shown. Refer to MA-9,
"RECOMMENDED FLUIDS AND LUBRICANTS" .
I
J
K
WFIA0019E
q Install the parking brake shoe springs as shown.
L
M
LFIA0090E
Revision: October 2006 PB-7 2006 Maxima
PARKING BRAKE SHOE
q The orientation of the adjuster is different from left to right.
Assemble the adjuster so that the threaded part is expanded
when rotating it to the direction as shown. Completely retract the
adjuster to assemble. When disassembling the adjuster, apply
brake grease to the threads.
q After installing parking brake shoes and rotor, adjust the parking
brake. Refer to PB-8, "SHOE CLEARANCE" .
WFIA0021E
Inspection EFS004E3
q Visually inspect the lining for abnormal wear, damage and peeling.
q Measure thickness "A" of the lining using a micrometer.
Standard lining thickness : 3.2 mm (0.126 in)
Lining wear limit "A" : 1.5 mm (0.059 in)
SBR021A
q Visually inspect the inside of the drum for abnormal wear, damage and cracks. Measure the inside diame-
ter of the drum using a pair of vernier calipers.
Standard inner diameter : 172.0 mm (6.77 in)
Maximum inner diameter : 173.0 mm (6.81 in)
CAUTION:
If necessary, remove the parking brake shoe and check as follows.
q Check the shoe sliding surface for abnormal wear and damage.
q Check the anchor pin for abnormal wear and corrosion.
q Check the return springs for sagging.
q Check the adjuster for rough operation.
Adjustment EFS00686
SHOE CLEARANCE
1. Make sure the parking brake control lever is fully released and parking brake cable adjusting nut is loos-
ened.
2. Remove the adjuster hole plug installed on the rotor. Using a
screwdriver, turn the adjuster as shown until the rotor is locked.
After locking, turn the adjuster in the opposite direction 5 or 6
notches.
3. Rotate the rotor to make sure that there is no drag. Install the
adjuster hole plug.
4. After adjusting the clearance of the rear shoes, adjust the park-
ing brake cable. Refer to PB-5, "Adjustment" .
q After replacing the shoes or the brake rotor or if the parking
brake does not function well, carry out the break-in procedure.
Refer to PB-9, "Breaking-in Drum and Lining" . SBR046C
Revision: October 2006 PB-8 2006 Maxima
PARKING BRAKE SHOE
Breaking-in Drum and Lining EFS004E4
A
CAUTION:
Do not carry out the break-in procedure excessively. Doing so may cause uneven or premature wear
of the brake shoe lining.
When new parking brake shoes or brake rotors are installed or when parking brake performance is poor, per- B
form the following break-in procedure.
1. Drive the unloaded vehicle on a safe, level and dry road.
2. Pull the parking brake control lever with a force of 147 N (15 kg, 33 lb). C
3. While pulling the lever, continue to drive the vehicle forward 100 meters (328 ft) at approximately 35 km/h
(22 MPH).
4. Allow the parking brake to cool down for approximately five minutes. D
5. Release the parking brake control lever and drive the vehicle under normal conditions for two minutes to
cool down the parking brake.
6. Repeat steps 1 through 5 three times and repeat just step 5 once more. E
7. After performing the break-in procedure, check the stroke of the parking brake control lever. If it is out of
specification, adjust again. Refer to PB-5, "Adjustment" .
PB
G
H
I
J
K
L
M
Revision: October 2006 PB-9 2006 Maxima
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Parking Brake Control EFS004E5
Control type Hand lever
Number of notches [under force of 196 N (20.4 kg, 44.9 lb)] 7-8
Number of notches when warning lamp switch comes on 1
Parking Drum Brake EFS004E6
Type DS17HF
Standard thickness (new) 3.2 mm (0.126 in)
Brake lining
Wear limit thickness 1.5 mm (0.059 in)
Standard inner diameter (new) 172 mm (6.77 in)
Drum (disc)
Wear limit of inner diameter 173 mm (6.81 in)
Revision: October 2006 PB-10 2006 Maxima
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo