Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2006-2009 Approved Nissan Maxima 2007 FAX
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download FAX documenatation <<
Text preview - extract from the document
D DRIVELINE/AXLE
A
B
SECTION
FRONT AXLE C
FAX
E
CONTENTS
PRECAUTIONS ......................................................... 2
. FRONT DRIVE SHAFT ............................................ 11 . F
Precautions ............................................................. 2
. Removal and Installation ....................................... 11 .
PREPARATION .......................................................... 3
. REMOVAL .......................................................... 11
.
Special Service Tools .............................................. 3
. INSPECTION AFTER REMOVAL ...................... 13 . G
Commercial Service Tools ....................................... 3 . INSTALLATION .................................................. 13 .
NOISE, VIBRATION, AND HARSHNESS (NVH) Disassembly and Assembly ................................... 14 .
TROUBLESHOOTING ............................................... 4 . DISASSEMBLY .................................................. 15 .
H
NVH Troubleshooting Chart .................................... 4 . INSPECTION AFTER DISASSEMBLY ............... 16 .
WHEEL HUB AND KNUCKLE .................................. 5 . ASSEMBLY ........................................................ 17.
On-vehicle Service .................................................. 5
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 21 .
FRONT WHEEL BEARING .................................. 5 . Drive Shaft ............................................................. 21
. I
Removal and Installation ......................................... 6. Wheel Bearing (Front) ........................................... 21 .
REMOVAL ............................................................ 7
. Damper .................................................................. 21
.
INSPECTION AFTER REMOVAL ........................ 8 . Boot Bands ............................................................ 21
. J
INSTALLATION .................................................... 8
.
Disassembly and Assembly .................................... 8 .
DISASSEMBLY .................................................... 8.
K
ASSEMBLY .......................................................... 9
.
L
M
Revision: May 2006 FAX-1 2007 Maxima
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions EDS003AY
CAUTION:
G When installing each rubber part, final tightening must be carried out under unladen condition*
with tires on ground.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated
positions.
G After installing removed suspension parts, check the wheel alignment.
G Do not jack up at lower links.
Observe the following precautions when disassembling and servicing drive shaft.
G Perform work in a location which is as dust-free as possible.
G Before disassembling and servicing, clean the outside of parts.
G Prevention of the entry of foreign objects must be taken into account during disassembly of the service
location.
G Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean
cover must be placed over parts.
G Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adher-
ing to parts.
G Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by
blowing with air or wiping with paper shop cloths.
Revision: May 2006 FAX-2 2007 Maxima
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools EDS003AZ
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description B
(Kent-Moore No.)
Tool name
HT72520000 Removing tie-rod outer end and lower ball C
(J-25730-A) joint
Ball joint remover
FAX
NT146
E
KV38106700 Installing drive shaft
(J-34296) LH: KV38106700 (J34296)
KV38106800 RH: KV38106800 (J34297)
(J-34297) F
Differential side oil seal protector
NT147 G
KV40107300 Installing boot bands
( -- )
Boot Band crimping tool H
I
ZZA1229D
KV40107500 Removing drive shaft (VQ35DE)
( -- ) J
Drive shaft attachment
K
ZZA1230D
Commercial Service Tools EDS003B0 L
Tool name Description
Power tool Loosening bolts and nuts
M
PBIC0190E
Revision: May 2006 FAX-3 2007 Maxima
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING PFP:00003
NVH Troubleshooting Chart EDS001EO
Use the chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
FSU-4, "NVH Troubleshooting Chart"
Refer to DRIVE SHAFT in this chart.
WT-4, "NVH Troubleshooting Chart"
WT-4, "NVH Troubleshooting Chart"
BR-5, "NVH Troubleshooting Chart"
PS-5, "NVH Troubleshooting Chart"
Refer to AXLE in this chart.
FAX-14
FAX-6
FAX-5
--
--
--
Reference page
Improper installation, looseness
Wheel bearing damage
Joint sliding resistance
Excessive joint angle
Parts interference
Possible cause and SUSPECTED PARTS
ROAD WHEEL
DRIVE SHAFT
SUSPENSION
STEERING
Imbalance
BRAKES
TIRES
AXLE
Noise, Vibration ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo