Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Maxima 2006-2009 Approved Nissan Maxima 2007 FSU

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
FSU

>> Download FSU documenatation <<

Text preview - extract from the document

E SUSPENSION

B
SECTION
FRONT SUSPENSION C

FSU
CONTENTS
PRECAUTIONS ......................................................... 2 . Removal and Installation ......................................... 9 . F
Precautions for Supplemental Restraint System REMOVAL ............................................................ 9 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- INSTALLATION .................................................... 9 .
SIONER" ................................................................. 2
. Disassembly and Assembly ................................... 10 . G
Precautions ............................................................. 2
. DISASSEMBLY .................................................. 10 .
PREPARATION .......................................................... 3. INSPECTION AFTER DISASSEMBLY ............... 10 .
Special Service Tools .............................................. 3 . ........................................................................... 10
.
H
Commercial Service Tools ....................................... 3 . STABILIZER BAR .................................................... 12 .
NOISE, VIBRATION, AND HARSHNESS (NVH) Removal and Installation ....................................... 12 .
TROUBLESHOOTING ............................................... 4 . REMOVAL .......................................................... 12 .
NVH Troubleshooting Chart .................................... 4 . INSTALLATION .................................................. 12 . I
FRONT SUSPENSION ASSEMBLY .......................... 5 . Inspection .............................................................. 13
.
Components ............................................................ 5
. TRANSVERSE LINK ................................................ 14 .
On-vehicle Service .................................................. 6. Removal and Installation ....................................... 14 . J
FRONT SUSPENSION PARTS ............................ 6 . REMOVAL .......................................................... 14 .
Front Wheel Alignment ............................................ 6 . INSPECTION AFTER REMOVAL ...................... 14 .
DESCRIPTION ..................................................... 6 . INSTALLATION .................................................. 15 .
K
PRELIMINARY INSPECTION .............................. 6 . FRONT SUSPENSION MEMBER ............................ 16 .
GENERAL INFORMATION AND RECOMMEN- Removal and Installation ....................................... 16 .
DATIONS ............................................................. 7
. REMOVAL .......................................................... 16 .
THE ALIGNMENT PROCESS ............................. 7 . INSTALLATION .................................................. 18 . L
CAMBER, CASTER AND KINGPIN INCLINA- SERVICE DATA AND SPECIFICATIONS (SDS) ..... 19 .
TION ..................................................................... 7
. General Specifications ........................................... 19 .
TOE-IN ................................................................. 7
. Front Wheel Alignment (Unladen*1) ...................... 19 . M
FRONT WHEEL TURNING ANGLE .................... 8 . Lower Ball Joint ..................................................... 20 .
COIL SPRING AND SHOCK ABSORBER ................ 9 . Wheelarch Height (Unladen*) ................................ 20 .

Revision: May 2006 FSU-1 2007 Maxima
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EES0024Y

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
G Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Precautions EES0024Z

G When installing rubber parts, final tightening must be carried out under unladen condition* with
tires on ground.
Oil will shorten the life of rubber bushings. Be sure to wipe off any spilled oil.
*: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated posi-
tions.
G After installing removed suspension parts, check wheel alignment and adjust if necessary.
G Lock nuts are unreusable parts; always use new ones.
When replacing, do not wipe the oil off the new lock nut before tightening.

Revision: May 2006 FSU-2 2007 Maxima
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools EES0018J

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description
B
(Kent-Moore No.)
Tool name
HT72520000 Removing tie-rod outer end and lower ball
(J-25730-A) joint C
Ball joint remover

NT146

KV101J0010 Front suspension member removal FSU
(J-47242)
Engine support table

WBIA0658E
G
Commercial Service Tools EES0018K

Tool name Description
H
Attachment wheel alignment Measure wheel alignment
a: Screw M24 x 1.5 pitch
b: 35 mm (1.38 in) dia.
c: 65 mm (2.56 in) dia. I
d: 56 mm (2.20 in)
e: 12 mm (0.47 in)

NT148
J
Spring compressor Removing and installing coil spring

L
NT717

Power tool Loosening bolts and nuts
M

PBIC0190E

Revision: May 2006 FSU-3 2007 Maxima
Symptom

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo