Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Micra 2003-2006 Approved 03k12e RF

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
RF


>> Download RF documenatation <<

Text preview - extract from the document
ROOF


I BODY

                                                                                                                                                             A


                                                                                                                                                             B
                                                                                                 SECTION
                                                                                                                                       ROOF                  C


                                                                                                                                                             D


                                                                                                                                                             E
                                                               CONTENTS
SUNROOF ................................................................. 2
                                                                     .           Sunroof Lid Weatherstrip Inspection ....................... 5     .         F
 Precautions for Supplemental Restraint System                                   Link and Wire Assembly Inspection ......................... 5     .
 (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-                                         Fitting Adjustment .................................................... 5
                                                                                                                                                   .
 SIONER" ................................................................. 2
                                                                     .             LONGITUDINAL/LATERAL CLEARANCE                                            G
 Precautions ............................................................. 2
                                                                     .             ADJUSTMENT ..................................................... 5
                                                                                                                                                   .
 System Description ................................................. 2
                                                                     .             SURFACE MISMATCH ADJUSTMENT ............... 6                   .
   RESUMING OPERATION .................................... 2         .           Removal and Installation ......................................... 7
                                                                                                                                                   .
                                                                                                                                                             H
 Component Parts Location ...................................... 3   .             SUNROOF UNIT .................................................. 8
                                                                                                                                                   .
 Wiring Diagram -- SROOF -- ................................ 4       .             GLASS LID ........................................................... 9
                                                                                                                                                   .
 Terminal and Reference Value for Sunroof Switch 5                   .....         SUNROOF MOTOR ............................................. 9   .
                                                                                                                                                             RF


                                                                                                                                                              J



                                                                                                                                                             K


                                                                                                                                                             L



                                                                                                                                                             M




                                                                          RF-1
                                                  SUNROOF

SUNROOF                                                             PFP:91210

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER"                                                                                             EIS004QU


The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
q    To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
     in the event of a collision which would result in air bag inflation, all maintenance must be per-
     formed by an authorized NISSAN/INFINITI dealer.
q    Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
     sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
     Bag Module, see the SRS section.
q    Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
     Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
     harness connectors.
Precautions                                                                                                     EIS004NM


q   If sunroof motor operation sound is noted but sunroof does not operate, replace motor assembly with
    glass lid fully closed.
q   If sunroof (glass lid and motor) does not operate when using sunroof switch then remove the front cover of
    the luggage compartment, and rotate motor gear box drive shaft with the emergency handle (in the tool
    box).
System Description                                                                                              EIS004NN


q   Operating sunroof switch allows glass lid open/close, and tilt UP and DOWN.
q   When sunroof switch is pressed firmly toward the OPEN side, glass lid automatically opens and automatic
    operation is stopped at a point 135 mm (5.31 in) to the fully closed position.
    NOTE:
    After the emergency handle is used to rotate the motor drive shaft, sunroof switch operation may not cor-
    respond to actual glass lid movement. When this happens, conduct resuming operation to restore normal
    operation.
RESUMING OPERATION
q   If actual glass lid operation does not correspond to expected
    operation, operate sunroof switch to slide glass lid toward area
    A in the figure. This should result in resumption of normal opera-
    tion.
    CAUTION:
    Before normal operation is resumed, expected sunroof
    switch operation and actual glass lid movement may not
    correspond. Make sure that neither head nor hands pro-
    trude from sunroof and conduct resuming operation.

                                                                                                            MIIA0058E




                                                      RF-2
                             SUNROOF

Component Parts Location   SMA for VIN >SJN**AK12U1202682          EIS004NO

                                                                              A


                                                                              B



                                                                              C



                                                            MIIB0009E         D


                                                                              E



                                                                              F


                                                                              G


                                                                              H


                                                                              RF


                                                                               J



                                                                              K


                                                                              L



                                                                              M




                                RF-3
                             SUNROOF

Wiring Diagram -- SROOF --   SMA for VIN >SJN**AK12U1202682          EIS004NP




                                                              MIWA0343E




                                RF-4
                                                         SUNROOF

Terminal and Reference Value for Sunroof Switch                                   SMA for VIN >SJN**AK12U1202682          EIS004NQ

                                                                                                                                     A
     TERMI-    WIRE
                                      ITEM                              CONDITION                          VOLTAGE
      NAL     COLOR
                        Sunroof tilt DOWN or CLOSE sig-   Sunroof switch tilt DOWN or CLOSE
       1        GY                                                                                   Approx. 0  Approx. 12           B
                        nal                               operation
       2         B      IGN power supply                                     --                         Battery voltage
       3         L      Sunroof tilt UP or OPEN signal    Sunroof switch tilt UP or OPEN operation   Approx. 0  Approx. 12           C
Sunroof Lid Weatherstrip Inspection                                                                                       EIS004NR


If there is water leakage around glass lid, close glass lid and flush with water to determine whether it is from                     D
damaged parts or a gap.
1. Remove glass lid assembly.
2. Visually check weatherstrip for damage, deterioration, or deformation. If excess wear or damage is                                E
     detected, replace glass lid assembly.
Link and Wire Assembly Inspection                                                                                         EIS004NS


1.    If the link coating peels off to show the base material and an abnormal noise is heard, replace it.                            F
2.    Visually confirm the wire and rail groove are properly greased. If necessary, apply body grease.
Fitting Adjustment                                                                                                        EIS004NT
                                                                                                                                     G


                                                                                                                                     H


                                                                                                                                     RF


                                                                                                                                      J



                                                                                                                                     K


                                                                                                                                     L


                                                                                                                     MIIA0048E
                                                                                                                                     M
LONGITUDINAL/LATERAL CLEARANCE ADJUSTMENT
1.    Tilt up glass lid to remove side trim upper and lower.
2.    After loosening glass lid mounting bolts (Torx bolt: T25, 3 each on left/right), tilt down glass lid.
3.    Adjust glass lid according to sections A



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo