Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Micra 2003-2006 Approved 05k12e PB
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download PB documenatation <<
Text preview - extract from the document
PARKING BRAKE SYSTEM
F BRAKES
A
SECTION
PARKING BRAKE SYSTEM
PB B
C
D
E
CONTENTS
NOISE, VIBRATION AND HARSHNESS (NVH) Components ............................................................ 4
. PB
TROUBLESHOOTING ............................................... 2 . Removal and Installation ......................................... 4
.
NVH Troubleshooting Chart .................................... 2 . REMOVAL ............................................................ 4
.
PARKING BRAKE SYSTEM ..................................... 3 . INSTALLATION .................................................... 5
. G
On Board Inspection and Service ........................... 3 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 6 .
LEVER STROKE .................................................. 3 . Parking Brake .......................................................... 6
.
Adjustment .............................................................. 3
.
H
I
J
K
L
M
PB-1
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING PFP:00003
NVH Troubleshooting Chart EFS002FN
Use the chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
NVH in RSU section
NVH in RAX section
NVH in WT section
NVH in WT section
NVH in PS section
BR-28
BR-27
BR-28
BR-28
--
--
--
--
--
Reference page
Return spring damaged
Linings - uneven wear
Linings - damaged
Drum deformation
Drum imbalance
Drum deflection
ROAD WHEEL
SUSPENSION
Drum damage
Possible cause and
Drum runout
STEERING
SUSPECTED PARTS
Drum rust
TYRES
AXLE
Noise X X X X X X X X
Symptom BRAKE Shake X X X X X X
Shimmy, Judder X X X X X X X X X X X
X: Applicable
PB-2
PARKING BRAKE SYSTEM
PARKING BRAKE SYSTEM PFP:36010
A
On Board Inspection and Service EFS002FO
LEVER STROKE
q Operate parking brake lever with a force of 196 N (20 kg, 44.1 lb). Check if stroke is within specified num- B
ber of notches. (Check it by hearing clicks of ratchet.)
Lever stroke :11-12 notches
C
Adjustment EFS002FP
1. Insert a socket wrench into opening of parking brake lever.
Rotate adjusting nut to fully loosen cable, then return parking D
brake lever.
2. Depress the foot brake several times (about 2 or 3 times) and
adjust the rear shoe clearance.
E
NOTE:
Be sure to securely depress the foot brake.
PB
SFIA1111E
G
3. Rotate the road wheels to make sure that there is no drag.
4. Use the following procedure to adjust the cable.
a. Pull the lever up to the position where a socket wrench can be H
inserted.
b. Insert a socket wrench into the opening of the lever, and rotate
the adjusting nut to adjust lever stroke. I
NOTE:
Do not reuse adjusting nut after removing it.
J
MAA0182D
c. After operating the lever 3 to 4 times with a force of 196 N (20 kg, 44.1 lb), make sure that the lever stroke K
is within the specified number of notches.
d. With the lever completely returned, make sure that there is no drag on the rear brake.
L
M
PB-3
PARKING BRAKE SYSTEM
Components EFS002FQ
SFIA1110E
1. Device assembly 2. Screw 3. Warning lamp switch
4. Adjusting nut 5. Front cable 6. Rear left cable
7. Rear right cable
Removal and Installation EFS002FR
REMOVAL
1. Remove the console box. Refer to IP-9, "REMOVAL AND
INSTALLATION OF CONSOLE BOX." .
2. Disconnect warning lamp switch connector.
3. Loosen adjusting nut and separate the rear left and rear right
cable.
4. Remove device assembly tightening nuts, and remove device
assembly from vehicle.
SFIA0675J
5. Remove tire from vehicle.
6. Remove rear brake shoe and remove cable from the operating lever. Refer to BR-27, "Components" .
7. Remove the exhaust center tube and heat plate. Refer to EX-4, "EXHAUST SYSTEM" .
8. Disconnect the rear cable mount and remove it from the vehicle.
PB-4
PARKING BRAKE SYSTEM
INSTALLATION
1. Install in the reverse order of removal. Tighten nuts and bolts to the specified torque. A
2. Adjust the parking brake. Refer to PB-3, "Adjustment" .
B
C
D
E
PB
G
H
I
J
K
L
M
PB-5
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Parking Brake EFS002FS
Control type Center lever
Lever stroke [operating force 196 N (20 kg, 44.1 lb)] 11 - 12 notches
Full stroke 15 notches
Brake warning lamp stroke 1 notch or less
PB-6
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo