Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Micra 2003-2006 Approved sma CO-CR-001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
CO-CR-001


>> Download CO-CR-001 documenatation <<

Text preview - extract from the document
                                     PREPARATION
PREPARATION
Special Service Tools                     To ESM
 NISSAN Tool number
 (RENAULT tool number)                                  Description
 Tool name

 WS39930000                                             Pressing the tube of liquid gasket
 (   --    )
 Tube presser




                                            S-NT052


 EG17650301                                             Adapting radiator cap tester to radiator filler
 (   --     )                                           neck
 Radiator cap tester adapter                            a: 28 (1.10) dia.
                                                        b: 31.4 (1.236) dia.
                                                        c: 41.3 (1.626) dia.
                                                        Unit: mm (in)

                                            S-NT564


 KV99103510                                             Installing radiator upper and lower tanks
 (   --      )
 Radiator plate pliers A




                                            S-NT224


 KV99103520                                             Removing radiator upper and lower tanks
 (   --      )
 Radiator plate pliers B




                                            S-NT225


     --                                                 Leak checking
 (M.S. 554_07)                                          Checking reservoir tank and reservoir tank
 Tester                                                 cap




                                            MLIA0012E


     --                                                 Adapting tester to reservoir tank
 (M.S. 554_01)
 Reservoir tank tester adapter




                                            MLIA0013E


    --                                                  Adapting tester to reservoir tank cap
 (M.S. 554_06)
 Reservoir tank cap tester adapter




                                            MLIA0014E




                                        CO-1
                                               ENGINE COOLANT
ENGINE COOLANT
Inspection                                       To ESM
LEVEL CHECK
M/T Models without A/C and A/T Models
q   Check if the reservoir tank engine coolant level is within "MIN" to
    "MAX" when engine is cool.
q   adjust the engine coolant level as necessary.




                                                                                          SMA412B


M/T Models with A/C
q   Check if the reservoir tank coolant level is within MIN to MAX when engine is cool.
q   Adjust coolant if too much or too little.
                               Vehicle front




                                                                                          MBIB1360E




                                                                                          MBIA0092E




LEAK CHECK
M/T Model without A/C and A/T Models
q   To check for leakage, apply pressure to the cooling system with
    a radiator cap tester (commercial service tool) and radiator cap
    tester adapter (SST).
       Testing pressure : 157 kPa (1.57 bar, 1.6 kg/cm 2, 23 psi)
    WARNING:
    Never remove the radiator cap when the engine is hot. Seri-
    ous burns could occur from high pressure coolant escap-
    ing from the radiator.
    CAUTION:
    Higher pressure than specified may cause radiator damage.                             SLC134B




                                                     CO-2
                                           ENGINE COOLANT
     NOTE:
     In a case that engine coolant decreases, replenish radiator with engine coolant.
q    If anything is found, repair or replace damaged parts.
M/T Models with A/C
q    To check for leakage, fit the adapter to the reservoir tank (1),
     and then connect it to the tester.




                                                                                             MBIB1362E



q    Warm up the engine and turn it off.
q    Apply pressure to the cooling system and stop pumping.
        Testing pressure     : 10 kpa
                             (0.1 bar, 0.10 kg/cm2, 1.5 psi)
q    If the pressure drops, look for leakage.
q    Unscrew slowly the adapter from the reservoir tank to reduce
     the pressure in cooling system, and install the reservoir tank
     cap.
     WARNING:
     Never remove the reservoir tank cap when the engine is                                  MBIA0094E
     hot. Serious burns could occur from high pressure engine
     coolant escaping from the radiator.
     CAUTION:
     Higher pressure than specified may cause radiator damage.
Changing Engine coolant
WARNING:
q To avoid being scalded, never change the coolant when the engine is hot.
q Wrap a thick cloth around radiator cap and carefully remove the cap. First, turn the cap a quarter
  of a turn to release built-up pressure. Then turn the cap all the way.
DRAINING ENGINE COOLANT
M/T Models without A/C and A/T Models
1.   Disconnect radiator lower hose and radiator cap.
     CAUTION:
     Make sure to drain when the engine coolant temperature is cold.

2.   Remove reservoir tank and drain the engine coolant in the fol-
     lowing procedures.
a.   Move relay case in front of the battery.
b.   Disconnect the reservoir tank from fan shroud to remove. With
     force applied in the left direction of vehicle, pull up reservoir
     tank.
3.   Check drain coolant for contaminants such as rust, corrosion or
     discoloration.
     If contaminated, flush engine cooling system.
     Refer to CO-5, "FLUSHING COOLING SYSTEM" in this SMA                                    PBIC1476E
     file.


                                                    CO-3
                                                   ENGINE COOLANT
M/T Models with A/C
1.   Disconnect radiator lower hose and reservoir tank cap.
     CAUTION:
     Make sure to drain when the engine coolant temperature is cold.

2.   Remove reservoir tank and drain the engine coolant.
                                 : Vehicle front

3.   Check drain coolant for contaminants such as rust, corrosion or
     discoloration.
     If contaminated, flush engine cooling system.
     Refer to CO-5, "FLUSHING COOLING SYSTEM" in this SMA
     file.


                                                                       MBIB1360E


REFILLING ENGINE COOLANT
1.   Install reservoir tank.
2.   Connect radiator lower hose.
3.   Disconnect heater hose (at heater hose outlet side: upper side)
     as shown in figure. Keep hose end at the same height as that of
     before removal.




                                                                       PBIC1477E



4.   Fill radiator and reservoir tank to specified level.
     q   Pour coolant slowly of less than 2 (1-3/4 lmp qt) a
         minute to allow air in system to escape.
     q   When coolant from heater hose starts to drain, connect
         heater hose and continue to fill.
     q   Use Genuine Nissan Anti-freeze Coolant or equivalent
         mixed with water (distilled or demineralized).
         Refer to MA-18, "RECOMMENDED FLUIDS AND LUBRI-
         CANTS" on ESM.
                                                                       SMA182B




         Engine coolant capacity
         M/T models with A/C and A/T models
         With reservoir tank  : Approx. 4.9 (4-3/8 Imp qt)
         Reservoir tank           : 0.7    (5/8 lmp qt)




                                                                       SMA412B




                                                          CO-4
                                                  ENGINE COOLANT
         M/T models with A/C
         With reservoir tank : Approx. 5.3 (4-5/8 Imp qt)
         Reservoir tank      : 1.2 (1-1/8 lmp qt)

                                : Vehicle front




                                                                                                      MBIB1360E




                                                                                                      MBIA0092E

5.   Warm up engine to normal operating temperature with radiator cap installed.
6.   Warm up until thermostat opens. Keep warming at 3,000 rpm for approximately 10 minutes as guide.
     q For thermostat opening, touch radiator upper hose by hand to insure that water flow is hot.

     CAUTION:
     Be careful not to overheat.
7.   Stop the engine.
8.   After cooling engine [approximately 50



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo