Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Micra 2003-2006 Approved sma BR-001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download BR-001 documenatation <<

Text preview - extract from the document

                                                BRAKE FLUID
BRAKE FLUID                To ESM
Drain and Refill
CAUTION:
q  Refill with new brake fluid "DOT 3" or "DOT 4".
q  Do not mix different types of brake fluid (DOT 3, DOT 4).
q  Never reuse drained brake fluid.
q  Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is
   splashed on painted areas, wash it away with water immediately.
q  Pour brake fluid above MIN line of reservoir tank.
q  After pouring, reservoir cap must be securely tightened up to last.
q  After pouring the fluid, there should be no fluid leakage from any section.
1.   Turn ignition switch OFF, and remove ABS actuator connector.
2.   Connect a vinyl tube to the air bleeder.
3.   Drain brake fluid gradually from the air bleeder of each wheel
     while depressing the brake pedal.




                                                                                               BRA0007D




4.   Make sure that there is no foreign material in the reservoir tank,
     and refill with new brake fluid.
5.   Rest foot on brake pedal. Loosen air bleeder. Slowly depress
     pedal until it stops. Tighten air bleeder. Release brake pedal.
     Repeat this process a few times, then pause to add new brake
     fluid to master cylinder. Continue until new brake fluid flows out.
     For information regarding air bleeding work, refer to BR-10,
     "Bleeding Brake System" on ESM.


                                                                                               BRA0006D




                                                      BR-1

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo