Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Micra 2003-2006 Approved sma BRC-ESP_TCS_ABS-001

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download BRC-ESP_TCS_ABS-001 documenatation <<

Text preview - extract from the document

                                            PRECAUTIONS
PRECAUTIONS
Precautions for Brake System                                     To ESM
q   Recommended fluid is brake fluid "DOT 3" or "DOT 4".
q   Do not reuse drained brake fluid.
q   Be careful not to splash brake fluid on painted areas such as body. If brake fluid is splashed, wipe it off
    and flush area with water immediately.
q   Do not use mineral oils such as gasoline or kerosene to clean. They will ruin rubber parts and cause
    improper operation.
q   Using a flare nut torque wrench, securely tighten brake tube
    flare nuts.
q   Brake system is an important safety part. If a brake fluid leak is
    detected, always disassemble the affected part. If a malfunction
    is detected, replace part with a new one.
q   Before working, turn ignition switch OFF and disconnect electri-
    cal connectors of ABS actuator and electric unit (control unit) or
    battery negative terminals.
q   When installing brake piping, be sure to check torque.
q   After removing/installing any hydraulic parts of the brake or ESP                                 SBR820BA
    system (such as actuator and piping parts, etc.), bleed air from
    the system.




                                                  BRC-1
                                                 ON-VEHICLE SERVICE
ON-VEHICLE SERVICE
Adjustment of Steering Angle Sensor Neutral Position                                          To ESM
In case of doing work that applies to the list below, make sure to adjust neutral position of steering angle sen-
sor before running vehicle.
                                  Situation                             Adjustment of Steering Angle Sensor Neutral Position
    Disconnecting/connecting the battery                                                         

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo