Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Almera 2000-2003.2006 Approved Nissan Almera 2006 Classic B10 LC_QG16
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download LC_QG16 documenatation <<Text preview - extract from the document ENGINE LUBRICATION AND COOLING SYSTEMS
SECTION LC
CONTENTS
PRECAUTIONS AND PREPARATION
Precautions .................................................................. 2
Preparation ................................................................... 3
ENGINE LUBRICATION SYSTEM
Lubrication Circuit ....................................................... 4
SERVICE DATA
Engine Lubrication System ....................................... 5
[QG16] PRECAUTIONS AND PREPARATION
Precautions
Liquid Gasket Application
REMOVING THE APPLIED LIQUID GASKET
A
After removing the bolts and nuts, remove the liquid gasket
using a seal cutter (A: KV10111100).
CAUTION:
Be careful not to damage the mating surfaces.
Use a plastic hammer to tap gently for locations hard to use
SLC581B the seal cutter during removal.
CAUTION:
When it is necessary to use the minus (-) screwdriver,
be careful not to damage the mating surfaces.
LIQUID GASKET APPLICATION PROCEDURE
1. Remove the liquid gasket on the applied surfaces and mat-
ing surfaces with a scraper.
Completely remove all liquid gasket at grooves, bolts and
bolt hole threads.
2. Clean these surfaces with white gasoline and completely
remove all moisture, oil and other foreign particles.
3. Apply genuine liquid gasket with the tube pressure (commer-
cial tool).
4. Apply the liquid gasket at designated locations with correct
lengths.
Apply the liquid gasket at the surfaces grooves.
Apply the inner side of the bolt hole.
Assemble within 5 minutes from liquid gasket application.
Wipe out the stained liquid gasket.
Do not tighten the bolts temporarily after installation.
Wait at least 30 minutes before refilling engine oil and cool-
ant.
CAUTION:
If instructed in this Manual, follow the instructions.
LC-2
PRECAUTIONS AND PREPARATION [QG16]
Preparation
Special Service Tool
Item Description
Seal cutter Removing applied liquid gasket
KV10111100
Commercial Service Tool
Item Description
Oil filter wrench Removing oil filter
LC-3
[QG16] ENGINE LUBRICATION SYSTEM
Lubrication Circuit
LC-4
SERVICE DATA [QG16]
Engine Lubrication System
Standard Value
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo