Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Altima 2000-2005 Approved Nissan Altima 2005 ACC
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<
Text preview - extract from the document
B ENGINE
A
ACCELERATOR CONTROL SYSTEM
SECTION ACC ACC
C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . F
Removal and Installation ......................................... 2
. Accelerator Control .................................................. 4
.
REMOVAL ............................................................ 2
. PEDAL TRAVEL ................................................... 4
.
INSTALLATION .................................................... 2
. G
H
I
J
K
L
M
Revision: March 2005 ACC-1 2005 Altima
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Removal and Installation EBS00J8R
REMOVAL
1. Disconnect the battery negative terminal.
2. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
LBIA0333E
3. Remove the upper accelerator pedal nuts and lower accelerator
pedal bolt.
LBIA0334E
4. Remove the accelerator pedal and accelerator position sensor assembly.
q For electrical inspection of the accelerator pedal position sensor. Refer to EC-571, "ACCELERATOR
PEDAL POSITION SENSOR" (QR25DE), EC-1286, "ACCELERATOR PEDAL POSITION SENSOR"
(VQ35DE).
CAUTION:
q Do not disassemble the pedal assembly. Do not remove the accelerator pedal position sensor
from the pedal assembly.
q Avoid impact from dropping during handling.
q Keep the pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
q Check the accelerator pedal for smooth operation. There should
be no binding or sticking when applying or releasing the acceler-
ator pedal.
LBIA0334E
Revision: March 2005 ACC-2 2005 Altima
ACCELERATOR CONTROL SYSTEM
q Check that the accelerator pedal moves through the full speci-
fied distance of pedal travel. A
Pedal travel "A" : 52.6 - 58.2 mm (2.07 - 2.29 in)
ACC
C
LBIA0062E
D
CAUTION:
When the harness connector of the accelerator pedal position sensor is disconnected, perform the
"Accelerator pedal released position learning". Refer to EC-93, "Accelerator Pedal Released Position
Learning" (QR25DE), EC-711, "Accelerator Pedal Released Position Learning" (VQ35DE). E
F
G
H
I
J
K
L
M
Revision: March 2005 ACC-3 2005 Altima
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Accelerator Control EBS00J8S
PEDAL TRAVEL
LBIA0062E
Accelerator pedal - total travel "A" 52.6 - 58.2 mm (2.07 - 2.29 in)
Revision: March 2005 ACC-4 2005 Altima
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo