Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Altima 2000-2005 Approved Nissan Altima 2002 ACC
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<
Text preview - extract from the document
B ENGINE
A
ACCELERATOR CONTROL SYSTEM
SECTION ACC ACC
C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . F
Removal and Installation ......................................... 2
. Accelerator Control .................................................. 4
.
PEDAL TRAVEL ................................................... 4
.
G
H
I
J
K
L
M
ACC-1
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Removal and Installation EBS008QZ
1. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
LBIA0075E
2. Remove the upper and lower accelerator pedal nuts.
LBIA0060E
3. Remove the accelerator pedal and accelerator position sensor assembly.
a. Do not disassemble the pedal assembly. Do not remove the accelerator pedal position sensor from the
pedal assembly.
b. Avoid impact from dropping during handling.
c. Keep the pedal assembly away from water.
d. For electrical inspection of the accelerator pedal position sensor. Refer to EC-49, "Accelerator Pedal
Released Position Learning" .
ACC-2
ACCELERATOR CONTROL SYSTEM
4. Installation should be performed in the reverse procedure of
removal. A
q When the harness connector of the accelerator pedal position
sensor is disconnected, perform the "Accelerator pedal posi-
tion released learning". Refer to EC-49, "Accelerator Pedal ACC
Released Position Learning" .
q Check the accelerator pedal for smooth operation. There
should be no binding or sticking when applying or releasing
C
the accelerator pedal.
LBIA0061E
D
q Check that the accelerator pedal moves through the full spec-
ified distance of pedal travel.
E
Pedal travel : 52.6 - 58.2 mm (2.07 - 2.29 in)
A
F
G
LBIA0062E
H
I
J
K
L
M
ACC-3
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Accelerator Control EBS008R0
PEDAL TRAVEL
Accelerator control pedal - total travel 52.6 - 58.2 mm (2.07 - 2.29 in)
ACC-4
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo