Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Armada 2004-2009 Approved Nissan Armada 2009 RF
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download RF documenatation <<
Text preview - extract from the document
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
A
SECTION RF ROOF
B
C
D
E
CONTENTS
BASIC INSPECTION ................................... 3
. SUNROOF MOTOR ASSEMBLY : Special Repair F
Requirement ...........................................................11
.
DIAGNOSIS AND REPAIR WORKFLOW ......... 3
.
Work Flow ................................................................ 3
. SUNROOF SWITCH CIRCUIT .......................... 12
G
Description ..............................................................12
.
INSPECTION AND ADJUSTMENT .................... 5
. Component Function Check .................................12 .
Diagnosis Procedure ..............................................12 .
ADDITIONAL SERVICE WHEN REPLACING H
CONTROL UNIT ......................................................... 5
. DOOR SWITCH ................................................. 14
ADDITIONAL SERVICE WHEN REPLACING Description ..............................................................14
.
CONTROL UNIT : Description ................................. 5 . Component Function Check .................................14 . I
ADDITIONAL SERVICE WHEN REPLACING Diagnosis Procedure ..............................................14 .
CONTROL UNIT : Special Repair Requirement ...... 5
ECU DIAGNOSIS ........................................ 17
.
BASIC INSPECTION .................................................. 5 . J
BASIC INSPECTION : Special Repair Require- BCM (BODY CONTROL MODULE) ................. 17
ment ......................................................................... 5
. Reference Value .....................................................17.
Terminal Layout ......................................................20
. RF
FUNCTION DIAGNOSIS .............................. 6
. Physical Values ......................................................20
.
Wiring Diagram .......................................................26
.
SUNROOF SYSTEM .......................................... 6
.
Fail Safe .................................................................30
.
System Diagram ...................................................... 6
. L
DTC Inspection Priority Chart ..............................31 .
System Description .................................................. 6
.
DTC Index ..............................................................31
.
Component Parts Location ..................................... 7
.
Component Description ........................................... 7
. SUNROOF SYSTEM ......................................... 33 M
Reference Value .....................................................33
.
DIAGNOSIS SYSTEM (BCM) ............................ 8
.
Wiring Diagram .......................................................34
.
COMMON ITEM .......................................................... 8
. N
COMMON ITEM : CONSULT-III Function (BCM - SYMPTOM DIAGNOSIS ............................. 39
.
COMMON ITEM) ...................................................... 8
. SUNROOF DOES NOT OPERATE PROPER-
RETAINED PWR ........................................................ 8
. LY ...................................................................... 39 O
RETAINED PWR : CONSULT-III Function (BCM - Diagnosis Procedure ..............................................39
.
RETAINED PWR) .................................................... 9
.
AUTO OPERATION DOES NOT OPERATE .... 40
Diagnosis Procedure ..............................................40
. P
COMPONENT DIAGNOSIS ........................ 10
.
POWER SUPPLY AND GROUND CIRCUIT .....10
. DOES NOT STOP FULLY-OPEN OR FULLY-
CLOSED POSITION .......................................... 41
SUNROOF MOTOR ASSEMBLY ............................. 10 . Diagnosis Procedure ..............................................41
.
SUNROOF MOTOR ASSEMBLY :
Diagnosis Procedure ............................................. 10
.
Revision: October 2008 RF-1 2009 Armada
RETAINED POWER OPERATION DOES NOT Precaution for Supplemental Restraint System
OPERATE PROPERLY .................................... 42
. (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
Diagnosis Procedure ............................................. 42
. SIONER" ................................................................ 50
.
Precaution .............................................................. 50
.
SUNROOF DOES NOT OPERATE ANTI-
PINCH FUNCTION ............................................ 43
. PREPARATION .......................................... 51
Diagnosis Procedure ............................................. 43
.
PREPARATION ................................................ 51
.
SQUEAK AND RATTLE TROUBLE DIAG- Special Service Tool .............................................. 51
.
NOSES .............................................................. 44
. Commercial Service Tool ....................................... 51
.
Work Flow .............................................................. 44
.
Inspection Procedure ............................................. 46.
ON-VEHICLE REPAIR ............................... 52
Diagnostic Worksheet ............................................ 48 . SUNROOF SYSTEM ........................................ 52
.
Inspection ............................................................... 52
.
PRECAUTION ............................................ 50
.
Exploded View ....................................................... 55
.
PRECAUTIONS ................................................ 50
. Removal and Installation ........................................ 56 .
Revision: October 2008 RF-2 2009 Armada
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
BASIC INSPECTION A
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow INFOID:0000000003709179
B
OVERALL SEQUENCE
C
D
E
F
G
H
I
J
RF
L
M
N
O
P
ALKIA0859GB
DETAILED FLOW
Revision: October 2008 RF-3 2009 Armada
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
1. GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when
the incident/malfunction occurred).
>> GO TO 2
2. CONFIRM THE SYMPTOM
Confirm the symptom described by the customer.
Verify relation between the symptom and the condition when the symptom is detected.
>> GO TO 3
3. PERFORM BASIC INSPECTION
Perform RF-5, "BASIC INSPECTION : Special Repair Requirement".
Inspection End>>GO TO 4
4. DETECT MALFUNCTIONING SYSTEM BY SYMPTOM DIAGNOSIS
Detect malfunctioning system according to symptom diagnosis based on the confirmed symptom in step 4,
and determine the trouble diagnosis order based on possible causes and symptom.
>> GO TO 5
5. DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the system.
NOTE:
The Diagnostic Procedure described based on open circuit inspection. A short circuit inspection is also
required for the circuit check in the Diagnostic Procedure.
Is malfunctioning part detected?
YES >> GO TO 6
NO >> Check voltage of related BCM terminals using CONSULT-III.
6. REPAIR OR REPLACE THE MALFUNCTIONING PART
1. Repair or replace the malfunctioning part.
2. Reconnect parts or connectors disconnected during Diagnostic Procedure.
>> GO TO 7
7. FINAL CHECK
When symptom was described from the customer, refer to confirmed symptom in step 3 or 4, and check that
the symptom is not detected.
Does the symptom reappear?
YES >> GO TO 5
NO >> Inspection End.
Revision: October 2008 RF-4 2009 Armada
INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
A
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000003709180 B
MEMORY RESET PROCEDURE
1. Please observe the following instructions at confirming the sunroof operation. C
NOTE:
Do not disconnect the electronic power while the sunroof is operating or within 5 seconds after the sunroof
stops. (to wipe-out the memory of lid position and operating friction.) D
2. Initialization of system should be conducted after the following conditions.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo