
F BRAKES
A
B
SECTION
PARKING BRAKE SYSTEM C
D
E
CONTENTS
PARKING BRAKE CONTROL .................................. 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . PB
Components ............................................................ 2
. Drum Brake ............................................................. 4
.
Removal and Installation ......................................... 2 . Parking Brake Control ............................................. 4
.
Inspection ................................................................ 2
. G
Adjustment .............................................................. 3
.
H
I
J
K
L
M
PB-1
PARKING BRAKE CONTROL
PARKING BRAKE CONTROL PFP:36010
Components EFS001J0
LBR393
Removal and Installation EFS001J1
1. To remove parking brake pedal, remove lower instrument panel
on driver side. Refer to IP-10, "INSTRUMENT PANEL ASSEM-
BLY" .
2. Disconnect parking brake switch electrical connector.
3. Remove nuts, slacken off and remove adjusting nut.
4. Remove pedal assembly from vehicle and remove front cable
from pedal assembly.
LBR394
Inspection EFS001J2
1. Check parking brake pedal assembly for wear or other damage. Replace if necessary.
2. Check cables for discontinuity or deterioration. Replace if necessary.
3. Check warning lamp and switch. Replace if necessary.
4. Check parts at each connection portion and, if found deformed or damaged, replace.
PB-2
PARKING BRAKE CONTROL
Adjustment EFS001J3
A
Pay attention to the following point after adjustment.
1. Ensure there is no drag when pedal is released.
2. Loosen parking brake cable. B
3. Depress parking brake pedal fully more than five times.
4. Operate control pedal 10 times or more with a full stroke [169
mm (6.6 in)]. C
5. Adjust cable by turning adjusting nut.
6. Depress pedal with specified amount of force. Check pedal
stroke and ensure smooth operation. D
WBR348
Force : 196 N (20 kg, 44 lb)
Number of notches
E
KA24DE models :6