Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Frontier 2003-2005 Approved Nissan Frontier 2005 ACC
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<Text preview - extract from the documentB ENGINE
A
ACCELERATOR CONTROL SYSTEM
SECTION ACC ACC
C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . F
Components ............................................................ 2
. Accelerator Control .................................................. 4
.
Removal and Installation ......................................... 2
. ACCELERATOR PEDAL ...................................... 4 .
REMOVAL ............................................................ 2
. G
INSTALLATION .................................................... 2
.
INSPECTION AFTER INSTALLATION ................ 3 .
H
I
J
K
L
M
Revision: November 2005 ACC-1 2005 Frontier
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Components EBS00M6S
WBIA0594E
1. Non-adjustable accelerator pedal assembly
CAUTION:
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
Removal and Installation EBS00M6T
REMOVAL
1. Disconnect the negative battery terminal.
2. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
3. Remove the two upper and one lower accelerator pedal nuts.
4. Remove the accelerator pedal assembly.
CAUTION:
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor LBIA0333E
from the accelerator pedal bracket.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
Revision: November 2005 ACC-2 2005 Frontier
ACCELERATOR CONTROL SYSTEM
INSPECTION AFTER INSTALLATION
G Check that the accelerator pedal moves smoothly within the A
specified range.
Accelerator pedal - total pedal : 48 mm (1.89 in)
ACC
applied stroke "A"
G Check that the accelerator pedal smoothly returns to the original
position. C
G Perform an electrical inspection of the accelerator pedal position
sensor. Refer to EC-584, "DTC P2138 APP SENSOR" (QR),
EC-1289, "DTC P2138 APP SENSOR" (VQ).
D
CAUTION: LBIA0434E
When the harness connector of the accelerator pedal posi-
tion sensor is disconnected, perform Accelerator Pedal Released Position Learning. Refer to
EC-96, "Accelerator Pedal Released Position Learning" (QR), EC-720, "Accelerator Pedal E
Released Position Learning" (VQ).
F
G
H
I
J
K
L
M
Revision: November 2005 ACC-3 2005 Frontier
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Accelerator Control EBS00M6U
ACCELERATOR PEDAL
Unit: mm (in)
LBIA0434E
Accelerator pedal - total pedal applied stroke "A" 48 (1.89)
Revision: November 2005 ACC-4 2005 Frontier
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo