Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Pathfinder 2004-2007 Approved Nissan Pathfinder 2005 ACC
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<Text preview - extract from the documentB ENGINE
A
ACCELERATOR CONTROL SYSTEM
SECTION ACC ACC
C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . ERATOR PEDAL .................................................. 4
. F
Components ............................................................ 2
. INSTALLATION .................................................... 4
.
Removal and Installation ......................................... 3
. INSPECTION AFTER INSTALLATION ................. 4 .
REMOVAL FOR ADJUSTABLE ACCELERATOR SERVICE DATA AND SPECIFICATIONS (SDS) ....... 5 . G
PEDAL ................................................................. 3
. Accelerator Control .................................................. 5
.
REMOVAL FOR NON-ADJUSTABLE ACCEL- ADJUSTABLE AND NON-ADJUSTABLE
ACCELERATOR PEDAL ...................................... 5 .
H
I
J
K
L
M
Revision: November 2005 ACC-1 2005 Pathfinder
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Components EBS00M4J
Adjustable Accelerator Pedal
WBIA0628E
1. Adjustable accelerator pedal assembly 2. Adjustable brake pedal cable 3. Adjustable brake pedal cable lock
tab (part of the cable)
Revision: November 2005 ACC-2 2005 Pathfinder
ACCELERATOR CONTROL SYSTEM
Non-adjustable Accelerator Pedal
A
ACC
C
D
E
F
G
H
WBIA0629E I
1. Non-adjustable accelerator pedal assembly
CAUTION:
G Before removal and installation, the adjustable accelerator and brake pedals must be in the front- J
most position, if equipped. This is to align the base position of the accelerator and brake pedals.
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor from the accelerator pedal bracket. K
G Do not disassemble the accelerator pedal adjusting mechanism.
G Avoid damage from dropping the accelerator pedal assembly during handling.
L
G Keep the accelerator pedal assembly away from water.
Removal and Installation EBS00KB3
REMOVAL FOR ADJUSTABLE ACCELERATOR PEDAL M
1. Move the accelerator and brake pedals to the frontmost position.
2. Turn the ignition switch OFF and disconnect the negative battery terminal.
3. Disconnect the adjustable pedal electric motor electrical connector.
4. Disconnect the adjustable pedal electric motor memory electrical connector, if equipped.
5. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
LBIA0333E
Revision: November 2005 ACC-3 2005 Pathfinder
ACCELERATOR CONTROL SYSTEM
6. Disconnect the adjustable brake pedal cable from the adjustable
accelerator pedal.
G Release the two lock tabs, then pull the adjustable brake
pedal cable to disconnect it from the adjustable accelerator
pedal.
LFIA0233E
7. Remove the two upper and one lower accelerator pedal nuts.
8. Remove the adjustable accelerator pedal assembly.
CAUTION:
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
G Do not disassemble the accelerator pedal adjusting mechanism.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
REMOVAL FOR NON-ADJUSTABLE ACCELERATOR PEDAL
1. Disconnect the negative battery terminal.
2. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
3. Remove the two upper and one lower accelerator pedal nuts.
4. Remove the accelerator pedal assembly.
CAUTION:
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor LBIA0333E
from the accelerator pedal bracket.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
INSPECTION AFTER INSTALLATION
G Check that the accelerator pedal moves smoothly within the
specified range.
Accelerator pedal - total pedal : 48 mm (1.89 in)
applied stroke "A"
G Check that the accelerator pedal smoothly returns to the original
position.
G Perform an electrical inspection of the accelerator pedal position
sensor. Refer to EC-650, "DTC P2138 APP SENSOR" .
CAUTION:
When the harness connector of the accelerator pedal posi- LBIA0434E
tion sensor is disconnected, perform Accelerator Pedal
Released Position Learning. Refer to EC-88, "Accelerator Pedal Released Position Learning" .
Revision: November 2005 ACC-4 2005 Pathfinder
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
A
Accelerator Control EBS00KB4
ADJUSTABLE AND NON-ADJUSTABLE ACCELERATOR PEDAL
Unit: mm (in)
ACC
C
D
E
LBIA0434E
Accelerator pedal - total pedal applied stroke "A" 48 (1.89)
F
G
H
I
J
K
L
M
Revision: November 2005 ACC-5 2005 Pathfinder
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: November 2005 ACC-6 2005 Pathfinder
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo