Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Primera 2000.2005 Approved Nissan Primera 2000 ec_qg18
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ec_qg18 documenatation <<Text preview - extract from the document ENGINE CONTROL SYSTEM
SECTION EC
EC
CONTENTS
QG18DE ON BOARD DIAGNOSTIC SYSTEM
DESCRIPTION ...............................................................45
TROUBLE DIAGNOSIS -- INDEX..................................6
Introduction ................................................................45
Alphabetical & P No. Index for DTC ...........................6
Two Trip Detection Logic...........................................45
PRECAUTIONS ...............................................................9
Emission-related Diagnostic Information ...................46
Supplemental Restraint System (SRS) ``AIR
Malfunction Indicator (MI) ..........................................54
BAG'' and ``SEAT BELT PRE-TENSIONER''..............9
OBD System Operation Chart ...................................59
Precautions for On Board Diagnostic (OBD)
CONSULT-II...............................................................64
System of Engine ........................................................9
Generic Scan Tool (GST)..........................................74
Engine Fuel & Emission Control System ..................10
TROUBLE DIAGNOSIS -- INTRODUCTION ...............76
Precautions ................................................................11
Introduction ................................................................76
Wiring Diagrams and Trouble Diagnosis...................12
Work Flow..................................................................78
PREPARATION .............................................................13
TROUBLE DIAGNOSIS -- BASIC INSPECTION ........80
Special Service Tools ................................................13
Basic Inspection.........................................................80
Commercial Service Tool ..........................................13
TROUBLE DIAGNOSIS -- GENERAL
ENGINE AND EMISSION CONTROL OVERALL
DESCRIPTION ...............................................................90
SYSTEM.........................................................................14
DTC Inspection Priority Chart....................................90
Engine Control Component Parts Location...............14
Fail-safe Chart ...........................................................91
Circuit Diagram ..........................................................17
Symptom Matrix Chart...............................................92
System Diagram ........................................................18
CONSULT-II Reference Value in Data Monitor
Vacuum Hose Drawing..............................................19
Mode ..........................................................................96
System Chart .............................................................20
Major Sensor Reference Graph in Data Monitor
ENGINE AND EMISSION BASIC CONTROL
Mode ..........................................................................98
SYSTEM DESCRIPTION ...............................................21
ECM Terminals and Reference Value.....................101
Multiport Fuel Injection (MFI) System .......................21
TROUBLE DIAGNOSIS FOR INTERMITTENT
Electronic Ignition (EI) System ..................................23
INCIDENT.....................................................................108
Air Conditioning Cut Control......................................24
Description ...............................................................108
Fuel Cut Control (at no load & high engine
Diagnostic Procedure ..............................................108
speed) ........................................................................25
TROUBLE DIAGNOSIS FOR POWER SUPPLY........109
Evaporative Emission System ...................................25
Main Power Supply and Ground Circuit..................109
Positive Crankcase Ventilation ..................................28
DTC P0100 MASS AIR FLOW SENSOR (MAFS)......115
BASIC SERVICE PROCEDURE ...................................29
Component Description ...........................................115
Fuel Pressure Release ..............................................29
CONSULT-II Reference Value in Data Monitor
Fuel Pressure Check .................................................29
Mode ........................................................................115
Fuel Pressure Regulator Check ................................30
ECM Terminals and Reference Value.....................115
Injector .......................................................................30
On Board Diagnosis Logic.......................................115
Idle Speed/Ignition Timing/Idle Mixture Ratio
DTC Confirmation Procedure ..................................116
Adjustment .................................................................32
Wiring Diagram ........................................................117
Idle Air Volume Learning ...........................................43
Diagnostic Procedure ..............................................118
CONTENTS (Cont'd)
Component Inspection.............................................120 DTC P0132 FRONT HEATED OXYGEN SENSOR
DTC P0110 INTAKE AIR TEMPERATURE (FRONT HO2S) (RICH SHIFT MONITORING) ...........150
SENSOR ......................................................................121 Component Description ...........................................150
Component Description ...........................................121 CONSULT-II Reference Value in Data Monitor
On Board Diagnosis Logic.......................................121 Mode ........................................................................150
DTC Confirmation Procedure ..................................121 ECM Terminals and Reference Value.....................150
Wiring Diagram ........................................................122 On Board Diagnosis Logic.......................................151
Diagnostic Procedure ..............................................123 DTC Confirmation Procedure ..................................151
Component Inspection.............................................124 Overall Function Check ...........................................152
DTC P0115 ENGINE COOLANT TEMPERATURE Diagnostic Procedure ..............................................152
SENSOR(ECTS) (CIRCUIT) ........................................125 Component Inspection.............................................154
Component Description ...........................................125 DTC P0133 FRONT HEATED OXYGEN SENSOR
CONSULT-II Reference Value in Data Monitor (FRONT HO2S) (RESPONSE MONITORING)............156
Mode ........................................................................125 Component Description ...........................................156
On Board Diagnosis Logic.......................................125 CONSULT-II Reference Value in Data Monitor
DTC Confirmation Procedure ..................................126 Mode ........................................................................156
Wiring Diagram ........................................................127 ECM Terminals and Reference Value.....................156
Diagnostic Procedure ..............................................128 On Board Diagnosis Logic.......................................157
Component Inspection.............................................129 DTC Confirmation Procedure ..................................157
DTC P0120 THROTTLE POSITION SENSOR ...........130 Overall Function Check ...........................................158
Component Description ...........................................130 Wiring Diagram ........................................................159
CONSULT-II Reference Value in Data Monitor Diagnostic Procedure ..............................................160
Mode ........................................................................130 Component Inspection.............................................163
ECM Terminals and Reference Value.....................131 DTC P0134 FRONT HEATED OXYGEN SENSOR
On Board Diagnosis Logic.......................................131 (FRONT HO2S) (HIGH VOLTAGE).............................164
DTC Confirmation Procedure ..................................131 Component Description ...........................................164
Wiring Diagram ........................................................133 CONSULT-II Reference Value in Data Monitor
Diagnostic Procedure ..............................................134 Mode ........................................................................164
Component Inspection.............................................136 ECM Terminals and Reference Value.....................164
DTC P0130 FRONT HEATED OXYGEN SENSOR On Board Diagnosis Logic.......................................165
(FRONT HO2S) (CIRCUIT)..........................................138 DTC Confirmation Procedure ..................................165
Component Description ...........................................138 Wiring Diagram ........................................................166
CONSULT-II Reference Value in Data Monitor Diagnostic Procedure ..............................................167
Mode ........................................................................138 Component Inspection.............................................168
ECM Terminals and Reference Value.....................138 DTC P0135 FRONT HEATED OXYGEN SENSOR
On Board Diagnosis Logic.......................................139 HEATER.......................................................................169
DTC Confirmation Procedure ..................................139 Description ...............................................................169
Overall Function Check ...........................................140 CONSULT-II Reference Value in Data Monitor
Wiring Diagram ........................................................141 Mode ........................................................................169
Diagnostic Procedure ..............................................142 ECM Terminals and Reference Value.....................169
Component Inspection.............................................143 On Board Diagnosis Logic.......................................169
DTC P0131 FRONT HEATED OXYGEN SENSOR DTC Confirmation Procedure ..................................170
(FRONT HO2S) (LEAN SHIFT MONITORING) ..........144 Wiring Diagram ........................................................171
Component Description ...........................................144 Diagnostic Procedure ..............................................172
CONSULT-II Reference Value in Data Monitor Component Inspection.............................................173
Mode ........................................................................144 DTC P0137 REAR HEATED OXYGEN SENSOR
ECM Terminals and Reference Value.....................144 (REAR HO2S) (MIN. VOLTAGE MONITORING)........174
On Board Diagnosis Logic.......................................145 Component Description ...........................................174
DTC Confirmation Procedure ..................................145 CONSULT-II Reference Value in Data Monitor
Overall Function Check ...........................................146 Mode ........................................................................174
Diagnostic Procedure ..............................................146 ECM Terminals and Reference Value.....................174
Component Inspection.............................................148 On Board Diagnosis Logic.......................................174
EC-QG-2
CONTENTS (Cont'd)
DTC Confirmation Procedure ..................................175 DTC P0171 FUEL INJECTION SYSTEM
Overall Function Check ...........................................176 FUNCTION (LEAN SIDE) ............................................209
Wiring Diagram ........................................................177 On Board Diagnosis Logic.......................................209
Diagnostic Procedure ..............................................178 DTC Confirmation Procedure ..................................209
Component Inspection.............................................181 Wiring Diagram ........................................................210
DTC P0138 REAR HEATED OXYGEN SENSOR Diagnostic Procedure ..............................................211
(REAR HO2S) (MAX. VOLTAGE MONITORING) ......182 DTC P0172 FUEL INJECTION SYSTEM
Component Description ...........................................182 FUNCTION (RICH SIDE) .............................................215
CONSULT-II Reference Value in Data Monitor On Board Diagnosis Logic.......................................215
Mode ........................................................................182 DTC Confirmation Procedure ..................................215
ECM Terminals and Reference Value.....................182 Wiring Diagram ........................................................216
On Board Diagnosis Logic.......................................182 Diagnostic Procedure ..............................................217
DTC Confirmation Procedure ..................................183 DTC P0180 TANK FUEL TEMPERATURE
Overall Function Check ...........................................184 SENSOR ......................................................................221
Wiring Diagram ........................................................185 Component Description ...........................................221
Diagnostic Procedure ..............................................186 On Board Diagnosis Logic.......................................221
Component Inspection.............................................188 DTC Confirmation Procedure ..................................221
DTC P0139 REAR HEATED OXYGEN SENSOR Wiring Diagram ........................................................222
(REAR HO2S) (RESPONSE MONITORING)..............190 Diagnostic Procedure ..............................................223
Component Description ...........................................190 Component Inspection.............................................224
CONSULT-II Reference Value in Data Monitor DTC P0300 - P0304 NO. 4 - 1 CYLINDER
Mode ........................................................................190 MISFIRE, MULTIPLE CYLINDER MISFIRE ...............225
ECM Terminals and Reference Value.....................190 On Board Diagnosis Logic.......................................225
On Board Diagnosis Logic.......................................190 DTC Confirmation Procedure ..................................225
DTC Confirmation Procedure ..................................191 Diagnostic Procedure ..............................................226
Overall Function Check ...........................................192 DTC P0325 KNOCK SENSOR (KS) ...........................231
Wiring Diagram ........................................................193 Component Description ...........................................231
Diagnostic Procedure ..............................................194 ECM Terminals and Reference Value.....................231
Component Inspection.............................................197 On Board Diagnosis Logic.......................................231
DTC P0140 REAR HEATED OXYGEN SENSOR DTC Confirmation Procedure ..................................231
(REAR HO2S) (HIGH VOLTAGE)...............................198 Wiring Diagram ........................................................232
Component Description ...........................................198 Diagnostic Procedure ..............................................233
CONSULT-II Reference Value in Data Monitor Component Inspection.............................................234
Mode ........................................................................198 DTC P0335 CRANKSHAFT POSITION SENSOR
ECM Terminals and Reference Value.....................198 (POS)............................................................................235
On Board Diagnosis Logic.......................................198 Component Description ...........................................235
DTC Confirmation Procedure ..................................199 ECM Terminals and Reference Value.....................235
Overall Function Check ...........................................199 On Board Diagnosis Logic.......................................235
Wiring Diagram ........................................................200 DTC Confirmation Procedure ..................................236
Diagnostic Procedure ..............................................201 Wiring Diagram ........................................................237
Component Inspection.............................................202 Diagnostic Procedure ..............................................238
DTC P0141 REAR HEATED OXYGEN SENSOR Component Inspection.............................................240
HEATER.......................................................................204 DTC P0340 CAMSHAFT POSITION SENSOR
Description ...............................................................204 (CMPS) (PHASE).........................................................241
CONSULT-II Reference Value in Data Monitor Component Description ...........................................241
Mode ........................................................................204 ECM Terminals and Reference Value.....................241
ECM Terminals and Reference Value.....................204 On Board Diagnosis Logic.......................................241
On Board Diagnosis Logic.......................................204 DTC Confirmation Procedure ..................................242
DTC Confirmation Procedure ..................................205 Wiring Diagram ........................................................243
Wiring Diagram ........................................................206 Diagnostic Procedure ..............................................244
Diagnostic Procedure ..............................................207 Component Inspection.............................................246
Component Inspection.............................................208
EC-QG-3
CONTENTS (Cont'd)
DTC P0400 EGR FUNCTION (CLOSE)......................247 Wiring Diagram ........................................................275
Description ...............................................................247 Diagnostic Procedure ..............................................276
CONSULT-II Reference Value in Data Monitor Component Inspection.............................................277
Mode ........................................................................248 DTC P0510 CLOSED THROTTLE POSITION
ECM Terminals and Reference Value.....................248 SWITCH .......................................................................278
On Board Diagnosis Logic.......................................248 Component Description ...........................................278
DTC Confirmation Procedure ..................................249 CONSULT-II Reference Value in Data Monitor
Wiring Diagram ........................................................251 Mode ........................................................................278
Diagnostic Procedure ..............................................252 ECM Terminals and Reference Value.....................278
Component Inspection.............................................254 On Board Diagnosis Logic.......................................278
DTC P0403 EGR VOLUME CONTROL VALVE DTC Confirmation Procedure ..................................279
(CIRCUIT).....................................................................255 Overall Function Check ...........................................279
Description ...............................................................255 Wiring Diagram ........................................................280
CONSULT-II Reference Value in Data Monitor Diagnostic Procedure ..............................................281
Mode ........................................................................256 Component Inspection.............................................282
ECM Terminals and Reference Value.....................256 DTC P0605 ECM .........................................................284
On Board Diagnosis Logic.......................................256 Component Description ...........................................284
DTC Confirmation Procedure ..................................256 On Board Diagnosis Logic.......................................284
Wiring Diagram ........................................................257 DTC Confirmation Procedure ..................................284
Diagnostic Procedure ..............................................258 Diagnostic Procedure ..............................................284
Component Inspection.............................................259 DTC P1111 INTAKE VALVE TIMING CONTROL
DTC P0420 THREE WAY CATALYST FUNCTION ...260 SOLENOID VALVE......................................................285
On Board Diagnosis Logic.......................................260 Component Description ...........................................285
DTC Confirmation Procedure ..................................260 Operation .................................................................285
Overall Function Check ...........................................261 CONSULT-II Reference Value in Data Monitor
Diagnostic Procedure ..............................................261 Mode ........................................................................285
DTC P0443 EVAP CANISTER PURGE VOLUME ECM Terminals and Reference Value.....................285
CONTROL SOLENOID VALVE (CIRCUIT) ................264 On Board Diagnosis Logic.......................................285
Description ...............................................................264 DTC Confirmation Procedure ..................................286
CONSULT-II Reference Value in Data Monitor Wiring Diagram ........................................................287
Mode ........................................................................264 Diagnostic Procedure ..............................................288
ECM Terminals and Reference Value.....................265 Component Inspection.............................................289
On Board Diagnosis Logic.......................................265 DTC P1131 SWIRL CONTROL VALVE CONTROL
DTC Confirmation Procedure ..................................265 SOLENOID VALVE......................................................290
Wiring Diagram ........................................................266 Description ...............................................................290
Diagnostic Procedure ..............................................267 CONSULT-II Reference Value in Data Monitor
Component Inspection.............................................268 Mode ........................................................................290
DTC P0500 VEHICLE SPEED SENSOR (VSS) .........269 ECM Terminals and Reference Value.....................291
Component Description ...........................................269 Component Description ...........................................291
ECM Terminals and Reference Value.....................269 On Board Diagnosis Logic.......................................291
On Board Diagnosis Logic.......................................269 DTC Confirmation Procedure ..................................291
DTC Confirmation Procedure ..................................269 Wiring Diagram ........................................................292
Wiring Diagram ........................................................271 Diagnostic Procedure ..............................................293
Diagnostic Procedure ..............................................272 Component Inspection.............................................294
DTC P0505 IDLE AIR CONTROL VALVE (IACV) DTC P1217 OVERHEAT (COOLING SYSTEM) .........296
-- AUXILIARY AIR CONTROL (AAC) VALVE ..........273 System Description..................................................296
Description ...............................................................273 CONSULT-II Reference Value in Data Monitor
CONSULT-II Reference Value in Data Monitor Mode ........................................................................296
Mode ........................................................................274 ECM Terminals and Reference Value.....................297
ECM Terminals and Reference Value.....................274 On Board Diagnosis Logic.......................................297
On Board Diagnosis Logic.......................................274 Overall Function Check ...........................................298
DTC Confirmation Procedure ..................................274 Wiring Diagram ........................................................299
EC-QG-4
CONTENTS (Cont'd)
Diagnostic Procedure ..............................................301 Diagnostic Procedure ..............................................338
Main 12 Causes of Overheating..............................305 FUEL PUMP.................................................................340
Component Inspection.............................................306 System Description..................................................340
DTC P1401 EGR TEMPERATURE SENSOR.............307 Component Description ...........................................340
Component Description ...........................................307 CONSULT-II Reference Value in Data Monitor
On Board Diagnosis Logic.......................................307 Mode ........................................................................340
DTC Confirmation Procedure ..................................307 ECM Terminals and Reference Value.....................340
Wiring Diagram ........................................................309 Wiring Diagram ........................................................341
Diagnostic Procedure ..............................................310 Diagnostic Procedure ..............................................342
Component Inspection.............................................311 Component Inspection.............................................344
DTC P1402 EGR FUNCTION (OPEN) ........................312 POWER STEERING OIL PRESSURE SWITCH.........345
Description ...............................................................312 Component Description ...........................................345
CONSULT-II Reference Value in Data Monitor CONSULT-II Reference Value in Data Monitor
Mode ........................................................................313 Mode ........................................................................345
ECM Terminals and Reference Value.....................313 ECM Terminals and Reference Value.....................345
On Board Diagnosis Logic.......................................313 Wiring Diagram ........................................................346
DTC Confirmation Procedure ..................................314 Diagnostic Procedure ..............................................347
Wiring Diagram ........................................................316 Component Inspection.............................................349
Diagnostic Procedure ..............................................317 ELECTRICAL LOAD SIGNAL.....................................350
Component Inspection.............................................318 CONSULT-II Reference Value in Data Monitor
DTC P1706 PARK/NEUTRAL POSITION (PNP) Mode ........................................................................350
SWITCH .......................................................................320 ECM Terminals and Reference Value.....................350
Component Description ...........................................320 Wiring Diagram ........................................................351
CONSULT-II Reference Value in Data Monitor MI & DATA LINK CONNECTORS ..............................353
Mode ........................................................................320 Wiring Diagram ........................................................353
ECM Terminals and Reference Value.....................320
On Board Diagnosis Logic.......................................320
DTC Confirmation Procedure ..................................320 SERVICE DATA AND SPECIFICATIONS (SDS) .......354
Overall Function Check ...........................................321 Fuel Pressure Regulator..........................................354
Wiring Diagram ........................................................322 Idle Speed and Ignition Timing................................354
Diagnostic Procedure For M/T Models....................323 Mass Air Flow Sensor .............................................354
INJECTOR ...................................................................325 Intake Air Temperature Sensor ...............................354
Component Description ...........................................325 Engine Coolant Temperature Sensor......................354
CONSULT-II Reference Value in Data Monitor Throttle Position Sensor ..........................................354
Mode ........................................................................325 Front Heated Oxygen Sensor Heater......................354
ECM Terminals and Reference Value.....................325 Rear Heated Oxygen Sensor Heater ......................354
Wiring Diagram ........................................................326 Tank Fuel Temperature Sensor ..............................355
Diagnostic Procedure ..............................................327 Crankshaft Position Sensor (POS)..........................355
Component Inspection.............................................329 Camshaft Position Sensor (PHASE) .......................355
IGNITION SIGNAL.......................................................330 EGR Volume Control Valve.....................................355
Component Description ...........................................330 EGR Temperature Sensor.......................................355
CONSULT-II Reference Value in Data Monitor EVAP Canister Purge Volume Control Valve..........355
Mode ........................................................................330 IACV-AAC Valve......................................................355
ECM Terminals and Reference Value.....................330 Injector .....................................................................355
Wiring Diagram ........................................................331 Ignition Coil with Power Transistor..........................356
Diagnostic Procedure ..............................................333 Fuel Pump ...............................................................356
Component Inspection.............................................335
START SIGNAL...........................................................336
CONSULT-II Reference Value in Data Monitor
Mode ........................................................................336
ECM Terminals and Reference Value.....................336
Wiring Diagram ........................................................337
EC-QG-5
TROUBLE DIAGNOSIS -- INDEX QG18DE
Alphabetical & P No. Index for DTC
Alphabetical & P No. Index for DTC NCEC0001
ALPHABETICAL INDEX FOR DTC NCEC0001S01
DTC*5
Items
CONSULT-II Reference page
(CONSULT-II screen terms) ECM*1
GST*2
Unable to access ECM -- -- EC-QG-91
AIR TEMP SEN/CIRC*6 P0110 0110 EC-QG-121
CAM POS SEN/CIRC P0340 0340 EC-QG-241
CLOSED TP SW/CIRC*6 P0510 0510 EC-QG-278
COOLANT T SEN/CIRC*3 P0115 0115 EC-QG-125
CPS/CIRCUIT (POS)*6 P0335 0335 EC-QG-235
CYL 1 MISFIRE*6 P0301 0301 EC-QG-225
CYL 2 MISFIRE*6 P0302 0302 EC-QG-225
CYL 3 MISFIRE*6 P0303 0303 EC-QG-225
CYL 4 MISFIRE*6 P0304 0304 EC-QG-225
ECM*6 P0605 0605 EC-QG-284
EGR SYSTEM*6 P0400 0400 EC-QG-247
EGR SYSTEM*6 P1402 1402 EC-QG-312
EGR TEMP SEN/CIRC*6 P1401 1401 EC-QG-307
EGR VOL CON/V CIR*6 P0403 0403 EC-QG-255
ENG OVER TEMP P1217 P1217 EC-QG-296
FR O2 SE HEATER-B1*6 P0135 0135 EC-QG-169
FRONT O2 SENSOR-B1*6 P0130 0130 EC-QG-138
FRONT O2 SENSOR-B1*6 P0131 0131 EC-QG-144
FRONT O2 SENSOR-B1*6 P0132 0132 EC-QG-150
FRONT O2 SENSOR-B1*6 P0133 0133 EC-QG-156
FRONT O2 SENSOR-B1*6 P0134 0134 EC-QG-164
FUEL SYS-LEAN/BK1*6 P0171 0171 EC-QG-209
FUEL SYS-RIGH/BK1*6 P0172 0172 EC-QG-215
FUEL TEMP SEN/CIRC*6 P0180 0180 EC-QG-221
IACV/AAC VLV/CIRC*6 P0505 0505 EC-QG-273
INT/V TIM V/CIR-B1*6 P1111 1111 EC-QG-285
KNOCK SEN/CIRC-B1 P0325 0325 EC-QG-231
MAF SEN/CIRCUIT*3 P0100 0100 EC-QG-115
MULTI CYL MISFIRE*6 P0300 0300 EC-QG-225
NATS MALFUNCTION P1610 - P1615 1610 - 1615 Refer to EL section.
NO SELF DIAGNOSTIC FAILURE INDICATED P0000 0000 --
NO SELF DIAGNOSTIC FAILUTRE INDICATED No DTC Flashing*4 EC-QG-55
P-N POS SW/CIRCUIT*6 P1706 1706 EC-QG-320
PURG VOLUME CONT/V*6 P0443 0443 EC-QG-264
EC-QG-6
TROUBLE DIAGNOSIS -- INDEX QG18DE
Alphabetical & P No. Index for DTC (Cont'd)
DTC*5
Items
CONSULT-II Reference page
(CONSULT-II screen terms) ECM*1
GST*2
REAR O2 SENSOR-B1*6 P0137 0137 EC-QG-174
REAR O2 SENSOR*6 P0138 0138 EC-QG-182
REAR O2 SENSOR*6 P0139 0139 EC-QG-190
REAR O2 SENSOR*6 P0140 0140 EC-QG-198
RR O2 SE HEATER-B1*6 P0141 0141 EC-QG-204
SWIRL CONT SOL/V*6 P1131 1131 EC-QG-290
THRTL POS SEN/CIRC*3 P0120 0120 EC-QG-130
TW CATALYST SYS-B1*6 P0420 0420 EC-QG-260
VEH SPEED SEN/CIRC P0500 0500 EC-QG-241
*1: In Diagnostic Test Mode II (Self-diagnostic results). These numbers are controlled by NISSAN.
*2: These numbers are prescribed by ISO15031-6.
*3: When the fail-safe operation occurs, the MI illuminates.
*4: While engine is running.
*5: 1st trip DTC No. is the same as DTC No.
*6: Not available for ``Eastern Europe model''.
P NO. INDEX FOR DTC NCEC0001S02
DTC*5
Items
CONSULT-II Reference page
ECM*1 (CONSULT-II screen terms)
GST*2
-- -- Unable to access ECM EC-QG-91
No DTC Flashing*4 NO SELF DIAGNOSTIC FAILURE INDICATED EC-QG-55
P0000 0000 NO SELF DIAGNOSTIC FAILURE INDICATED --
P0100 0100 MAF SEN/CIRCUIT*3 EC-QG-115
P0110 0110 AIR TEMP SEN/CIRC*6 EC-QG-121
P0115 0115 COOLANT T SEN/CIRC*3 EC-QG-125
P0120 0120 THRTL POS SEN/CIRC*3 EC-QG-130
P0130 0130 FRONT O2 SENSOR-B1 EC-QG-138
P0131 0131 FRONT O2 SENSOR-B1*6 EC-QG-144
P0132 0132 FRONT O2 SENSOR-B1*6 EC-QG-150
P0133 0133 FRONT O2 SENSOR-B1*6 EC-QG-156
P0134 0134 FRONT O2 SENSOR-B1*6 EC-QG-164
P0135 0135 FR O2 SE HEATER-B1*6 EC-QG-169
P0137 0137 REAR O2 SENSOR-B1*6 EC-QG-174
P0138 0138 REAR O2 SENSOR-B1*6 EC-QG-182
P0139 0139 REAR O2 SENSOR-B1*6 EC-QG-190
P0140 0140 REAR O2 SENSOR-B1*6 EC-QG-198
P0141 0141 RR O2 SE HEATER-B1*6 EC-QG-204
P0171 0171 FUEL SYS-LEAN/BK1*6 EC-QG-209
EC-QG-7
TROUBLE DIAGNOSIS -- INDEX QG18DE
Alphabetical & P No. Index for DTC (Cont'd)
DTC*5
Items
CONSULT-II Reference page
ECM*1 (CONSULT-II screen terms)
GST*2
P0172 0172 FUEL SYS-RICH/BK1*6 EC-QG-215
P0180 0180 FUEL TEMP SEN/CIRC*6 EC-QG-221
P0300 0300 MULTI CYL MISFIRE*6 EC-QG-225
P0301 0301 CYL 1 MISFIRE*6 EC-QG-225
P0302 0302 CYL 2 MISFIRE*6 EC-QG-225
P0303 0303 CYL 3 MISFIRE*6 EC-QG-225
P0304 0304 CYL 4 MISFIRE*6 EC-QG-225
P0325 0325 KNOCK SEN/CIRC-B1 EC-QG-231
P0335 0335 CPS/CIRCUIT (POS)*6 EC-QG-235
P0340 0340 CAM POS SEN/CIRC EC-QG-241
P0400 0400 EGR SYSTEM*6 EC-QG-247
P0403 0403 EGR VOL CON/V CIR*6 EC-QG-255
P0420 0420 TW CATALYST SYS-B1*6 EC-QG-260
P0443 0443 PURG VOLUME CONT/V*6 EC-QG-264
P0500 0500 VEH SPEED SEN/CIRC EC-QG-269
P0505 0505 IACV/AAC VLV/CIRC*6 EC-QG-273
P0510 0510 CLOSED TP SW/CIRC*6 EC-QG-278
P0605 0605 ECM EC-QG-284
P1111 1111 INT/V TIM V/CIR-V1*6 EC-QG-285
P1131 1131 SWIRL CONT SOL/V*6 EC-QG-290
P1217 1217 ENG OVER TEMP EC-QG-296
P1401 1401 EGR TEMP SEN/CIRC*6 EC-QG-307
P1402 1402 EGR SYSTEM*6 EC-QG-312
P1610 - 1615 1610 - 1615 NATS MALFUNCTION Refer to EL section.
P1706 1706 P-N POS SW/CIRCUIT*6 EC-QG-320
*1: In Diagnostic Test Mode II (Self-diagnostic results). These numbers are controlled by NISSAN.
*2: These numbers are prescribed by ISO15031-6.
*3: When the fail-safe operation occurs, the MI illuminates.
*4: While engine is running.
*5: 1st trip DTC No. is the same as DTC No.
*6: Not available for ``Eastern Europe model''.
EC-QG-8
PRECAUTIONS QG18DE
Supplemental Restraint System (SRS) ``AIR BAG'' and ``SEAT BELT PRE-TENSIONER''
Supplemental Restraint System (SRS) ``AIR
BAG'' and ``SEAT BELT PRE-TENSIONER'' NCEC0002
The Supplemental Restraint System ``AIR BAG'' and ``SEAT BELT PRE-TENSIONER'', used along with a seat
belt, help to reduce the risk or severity of injury to the driver and front passenger in a frontal collision. The
Supplemental Restraint System consists of air bag modules (located in the center of the steering wheel and
on the instrument panel on the passenger side), seat belt pre-tensioners, a diagnosis sensor unit, warning
lamp, wiring harness and spiral cable.
In addition to the supplemental air bag modules for a frontal collision, the supplemental side air bag used along
with the seat belt helps to reduce the risk or severity of injury to the driver and front passenger in a side col-
lision. The supplemental side air bag consists of air bag modules (located in the outer side of front seats),
satellite sensor, diagnosis sensor unit (one of components of supplemental air bags for a frontal collision),
wiring harness, warning lamp (one of components of supplemental air bags for a frontal collision). Information
necessary to service the system safely is included in the RS section of this Service Manual.
WARNING:
+ To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be performed
by an authorized NISSAN dealer.
+ Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system.
+ Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses (except ``SEAT BELT PRE-TENSIONER'' connector) can be
identified with yellow harness connector (and with yellow harness protector or yellow insulation
tape before the harness connectors).
Precautions for On Board Diagnostic (OBD)
System of Engine NCEC0003
The ECM has an on board diagnostic system. It will light up the malfunction indicator (MI) to warn the driver
of a malfunction causing emission deterioration.
CAUTION:
+ Be sure to turn the ignition switch ``OFF'' and disconnect the negative battery terminal before any
repair or inspection work. The open/short circuit of related switches, sensors, solenoid valves, etc.
will cause the MI to light up.
+ Be sure to connect and lock the connectors securely after work. A loose (unlocked) connector will
cause the MI to light up due to the open circuit. (Be sure the connector is free from water, grease,
dirt, bent terminals, etc.)
+ Certain systems and components, especially those related to OBD, may use a new style slide-
locking type harness connector.
For description and how to disconnect, refer to EL section, ``Description'', ``HARNESS CONNEC-
TOR''.
+ Be sure to route and secure the harnesses properly after work. The interference of the harness with
a bracket, etc. may cause the MI to light up due to the short circuit.
+ Be sure to connect rubber tubes properly after work. A misconnected or disconnected rubber tube
may cause the MI to light up due to the malfunction of the EGR system or fuel injection system,
etc.
+ Be sure to erase the unnecessary malfunction information (repairs completed) from the ECM before
returning the vehicle to the customer.
EC-QG-9
PRECAUTIONS QG18DE
Engine Fuel & Emission Control System
Engine Fuel & Emission Control System NCEC0004
WIRELESS EQUIPMENT
q When installing C.B. ham radio or a
mobile phone, be sure to observe the
following as it may adversely affect
electronic control systems depending
ECM on installation location.
1) Keep the antenna as far as
q Do not disassemble ECM.
possible from the electronic control units.
q If a battery terminal is disconnected,
2) Keep the antenna feeder line more than
the memory will return to the ECM
20 cm (8 in) away from the harness
value.
of electronic controls.
The ECM will now start to self-control
BATTERY Do not let them run parallel for a long
at its initial value. Engine operation can
q Always use a 12 volt battery as power distance.
vary slightly when the terminal is
source. disconnected. However, this is not an 3) Adjust the antenna and feeder line so
q Do not attempt to disconnect battery indication of a problem. Do not replace that the standing-wave ratio can be
cables while engine is running. parts because of a slight variation. kept smaller.
4) Be sure to ground the radio to vehicle
body.
ENGINE CONTROL PARTS HANDLING
q Handle mass air flow sensor carefully to FUEL PUMP
avoid damage. WHEN STARTING q Do not operate fuel pump when there
q Do not disassemble mass air flow q Do not depress accelerator pedal when is no fuel in lines.
sensor. starting. q Tighten fuel hose clamps to the
q Do not clean mass air flow sensor with q Immediately after starting, do not rev up specified torque.
any type of detergent. engine unnecessarily.
q Do not disassemble IAC valve-AAC valve. q Do not rev up engine just prior to
ECM HARNESS HANDLING
q Even a slight leak in the air intake shutdown.
system can cause serious problems. q Securely connect ECM harness
connectors.
q Do not shock or jar the camshaft
position sensor and crankshaft position A poor connection can cause an
sensor. extremely high (surge) voltage to develop
in coil and condenser, thus
resulting in damage to ICs.
q Keep ECM harness at least 10 cm (4
in) away from adjacent harness, to
prevent an ECM system malfunction
due to receiving external noise,
degraded operation of ICs, etc.
q Keep ECM parts and harness dry.
q Before removing parts, turn off ignition
switch and then disconnect battery
ground cable.
SEF331WB
EC-QG-10
PRECAUTIONS QG18DE
Precautions
Precautions NCEC0005
+ Before connecting or disconnecting the ECM harness
connector, turn ignition switch OFF and disconnect nega-
tive battery terminal. Failure to do so may damage the
ECM because battery voltage is applied to ECM even if
ignition switch is turned off.
SEF289H
Protector Lever + When connecting or disconnecting ECM harness
connector, use lever as shown.
When connecting, fasten connector securely with lever
moved until it stops.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo