Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Primera 2000.2005 Approved Nissan Primera 2000 fa
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download fa documenatation <<
Text preview - extract from the document
FRONT AXLE &
FRONT SUSPENSION
SECTION FA
CONTENTS
PRECAUTIONS AND PREPARATION ..................... 2 FRONT AXLE ............................................................ 9
Precautions ............................................................ 2 Wheel Hub and Knuckle ...................................... 10
Special Service Tools ............................................ 2 Drive shaft............................................................ 14
NOISE, VIBRATION AND HARSHNESS (NVH) FRONT SUSPENSION ............................................ 25
TROUBLESHOOTING ............................................... 3 Coil Spring and Shock Absorber ......................... 26
NVH Troubleshooting Chart................................... 3 Third Link and Upper Link ................................... 27 FA
FRONT SUSPENSION SYSTEM .............................. 4 Transverse Link and Lower Ball Joint ................. 30
ON-VEHICLE SERVICE ............................................ 5 Stabilizer Bar........................................................ 30
Front Axle and Front Suspension Parts ................ 5 SERVICE DATA AND SPECIFICATIONS (SDS) ... 32
Front Wheel Bearing.............................................. 6 General Specifications ......................................... 32
Front Wheel Alignment .......................................... 6 Inspection and Adjustment .................................. 33
Drive Shaft ............................................................. 8
PRECAUTIONS AND PREPARATION
Precautions
q When installing each rubber part, final tightening must
be carried out under unladen condition* with tires on
ground.
*: Fuel, radiator coolant and engine oil full. Spare tire,
jack, hand tools and mats in designated positions.
q When removing each suspension part, check wheel
GG94310000
alignment and adjust if necessary.
q Use Tool when removing or installing brake tubes.
SBR500
q Always torque brake lines when installing.
Special Service Tools
Tool number
Description
Tool name
HT72520000 Removing tie-rod outer end and lower
Ball joint remover ball joint
a: 33 (1.30)
b: 50 (1.97)
v: 11.5 (0.453) Unit: mm (in)
NT546
HT71780000 Removing and installing coil spring
Spring compressor
NT144
GG94310000 Removing and installing brake piping
Flare nut torque wrench
NT406 a: 10 mm (0.39 in)
KV38106700 Installing drive shaft
KV38106800
Differential side oil seal
protector
LH : KV38106700
NT147 RH : KV38106800
IM23600800 Measure wheel alignment
Attachment a: Screw M24 x 1.5
Wheel alignment b: 35 (1.38) dia.
c: 65 (2.56) dia.
d: 56 (2.20)
NT148
e: 12 (0.47) Unit: mm (in)
ST35652000 Fixing strut assembly
Strut attachment
NT145
FA-2
Symptom
X: Applicable
Reference page
SION
ROAD
TIRES
DRIVE
Possible cause and
SHAFT
FRONT
FRONT
WHEEL
SUSPECTED PARTS
SUSPEN-
AXLE AND
Noise
Noise
Noise
Shake
Shake
Shake
Shake
Judder
Judder
Shimmy
Shimmy
Vibration
Vibration
or handling
or handling
or handling
Noise, Vibration
Shimmy, Judder
Poor quality ride
Poor quality ride
Poor quality ride
X
X
Excessive joint angle --
X
Joint sliding resistance FA-20
X
X
X
X
X
X
X
X
X
X
Imbalance --
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Improper installation, looseness FA-5
X
X
X
X
X
X
Shock absorber deformation, damage or deflection FA-27
X
X
X
X
X
X
Bushing or mounting deterioration FA-27, FA-27
X
X
X
X
X
Parts interference --
X
X
X
FA-3
Spring fatigue --
X
X
Suspension looseness FA-5
X
X
Incorrect wheel alignment FA-6
X
Stabilizer bar fatigue FA-30
X
Wheel bearing damage FA-6
X
X
X
X
X
X
X
X
X
Out-of-round FA-6
X
X
X
X
X
X
Incorrect air pressure --
X
X
X
X
X
Uneven tire wear --
X
X
X
X
X
X
X
X
X
Deformation or damage --
NVH Troubleshooting Chart
X
X
Non-uniformity --
X
X
X
X
X
Incorrect tire size --
X
X
X
X
X
X
X
X
DRIVE SHAFT Refer to DRIVE SHAFT in this chart.
X
X
X
X
X
X
X
X
X
X
X
X
FRONT AXLE AND FRONT SUSPENSION Refer to FRONT AXLE AND FRONT SUSPENSION in this chart.
X
X
X
X
X
X
X
X
X
X
X
X
TIRES Refer to TIRES in this chart.
X
X
X
X
X
X
X
X
X
X
X
X
ROAD WHEEL Refer to ROAD WHEEL in this chart.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
REAR AXLE AND REAR SUSPENSION NVH in RA section
X
X
X
X
X
X
X
X
X
X
X
X
X
BRAKES NVH in BR section
Use the chart below to help you find cause of the symptom. If necessary, repair or replace these parts.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
STEERING NHV in ST section
FRONT SUSPENSION SYSTEM
SEC. 391c400c401
When installing each rubber part, final tightening
must be carried out under unladen condition*
with tires on ground.
* Fuel, radiator coolant and engine oil full.
Spare tire, jack, hand tools and mats in
designated positions.
Shock absorber mounting insulator
88 - 123
Coil spring (9.0 - 12.5, 65 - 90)
18 - 21
(1.9 - 2.1,
Upper link bracket 14 - 15)
93 - 123
(9.5 - 12.5, 69 - 90)
Front suspension
61 - 80 member
(6.3 - 8.1,
45 - 59)
Shock absorber
Upper link
40 - 49
Third link Stay (4.1 - 4.9, 30 - 36)
Knuckle 98 - 114
(10.0 - 11.6,
73 - 84)
Drive shaft
118 - 147
Front (12 - 14, 87 - 108)
Transverse link
118 - 147
(12 - 14, 87 - 108)
42 - 49
(4.3 - 4.4,
31 - 36)
42 - 49 Stabilizer bar
(4.3 - 4.9, 31 - 36)
: N◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo