Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Primera 2000.2005 Approved Nissan Primera 2005 fax
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download fax documenatation <<Text preview - extract from the documentFRONT AXLE
D DRIVELINE/AXLE
A
B
SECTION
FRONT AXLE C
FAX
E
CONTENTS
PRECAUTIONS ......................................................... 2 . INSTALLATION .................................................... 8 . F
Caution .................................................................... 2
. Disassembly and Assembly ................................. .... 8 .
Precautions for Brake System ................................. 2 . DISASSEMBLY .................................................... 8 .
PREPARATION .......................................................... 3. INSPECTION AFTER DISASSEMBLY ................. 9 . G
Special Service Tools .............................................. 3 . ASSEMBLY ...................................................... .... 9
.
Commercial Service Tools ....................................... 5 . FRONT DRIVE SHAFT .......................................... .. 11 .
NOISE, VIBRATION, AND HARSHNESS (NVH) Removal and Installation ....................................... 11 .
H
TROUBLESHOOTING ............................................... 6 . REMOVAL .......................................................... 11
.
NVH Troubleshooting Chart .................................... 6 . INSPECTION AFTER REMOVAL ...................... 12 .
FRONT WHEEL HUB AND KNUCKLE ..................... 7 . INSTALLATION .................................................. 12 .
On-Vehicle Inspection ............................................. 7 . Disassembly and Assembly ................................. .. 14 . I
FRONT WHEEL BEARINGS ............................... 7 . DISASSEMBLY .................................................. 14 .
Removal and Installation ......................................... 7 . INSPECTION AFTER DISASSEMBLY ............... 16 .
REMOVAL ............................................................ 7
. ASSEMBLY ...................................................... .. 17
. J
SERVICE DATA AND SPECIFICATIONS (SDS) ..... 22 .
Wheel Bearing ....................................................... 22
.
Drive Shaft ........................................................... .. 22
.
K
Dynamic Damper ................................................... 23 .
L
M
FAX-1
PRECAUTIONS
PRECAUTIONS PFP:00001
Caution EDS000NA
Observe the following precautions when disassembling and servicing drive shaft.
q The joint of drive shaft cannot be disassembled. Do not attempt to disassemble it.
q Perform work in a location which is as dust-free and dirt-free as possible.
q Before disassembling and servicing, clean the outside of parts.
q The disassembly and service location must be clean. Care must be taken to prevent parts from becoming
dirty and to prevent the entry of foreign objects.
q Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean
cover must be placed over parts.
q Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adher-
ing to parts.
q Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by
blowing with air or wiping with paper shop cloths.
Precautions for Brake System EDS000NB
q When installing rubber parts, final tightening must be carried out
under unladen condition* with tires on ground.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand
tools and mats in designated positions.
q Use flare nut wrench when removing or installing brake tubes.
q After installing removed suspension parts, check wheel align-
ment and adjust if necessary.
q Always torque brake lines when installing.
SBR686C
FAX-2
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools EDS000NC
Tool name
Description
Tool number B
C
Hub lock nuts wrench Installing the drive shaft
KV40104000 Installing and removing hub lock nut
FAX
ZZA0802D
Protector E
KV38107800
a: 29 mm (1.14 in) dia. Installing the drive shaft
KV38105500
a: 40 mm (1.57 in) dia.
F
ZZA0835D
G
Drift
ST17130000
Disassembling support bearings
a: 32 mm (1.26 in) dia. H
b: 60 mm (1.57 in) dia.
ZZA0836D
I
Drift
ST35271000 Assembling support bearings J
a: 72 mm (2.83 in) dia. Installing wheel bearings
b: 63 mm (2.48 in) dia.
ZZA0837D K
Drift
L
ST33252000
Assembling support bearings
a: 82 mm (3.23 in) dia.
b: 60 mm (2.36 in) dia.
M
ZZA0838D
Drift
KV38100500
Installing ABS sensor rotors
a: 80 mm (3.15 in) dia.
b: 60 mm (2.36 in) dia.
ZZA0701D
Collar
KV40101840
Installing ABS sensor rotors
a: 67 mm (2.64 in) dia.
b: 85 mm (3.35 in) dia.
ZZA1113D
FAX-3
PREPARATION
Tool name
Description
Tool number
Sliding hammer
Removing wheel hubs
ST36230000
ZZA0803D
Attachment
Removing wheel hubs
KV40104100
ZZA0804D
Drift
ST33061000 Removing inner race on outer side of
a: 28.5 mm (1.122 in) dia. wheel bearings
b: 38.0 mm (1.50 in) dia.
ZZA0969D
Bearing replacer Removing inner race on outer side of
ST30031000 wheel bearings
ZZA0700D
Drift
KV40100621
Installing wheel bearings
a: 76 mm (2.99 in) dia.
b: 69 mm (2.72 in) dia.
ZZA0814D
Drift
ST30613000
Installing and removing wheel bearing
a: 72 mm (2.83 in) dia.
b: 48 mm (1.89 in) dia.
ZZA0830D
Drift
ST27863000
Installing and removing wheel bearing
a: 75 mm (2.95 in) dia.
b: 62 mm (2.44 in) dia.
ZZA0832D
FAX-4
PREPARATION
Tool name
Description A
Tool number
Drift B
ST33400001
Installing wheel hub
a: 72 mm (2.83 in) dia.
b: 63 mm (2.48 in) dia.
C
ZZA0814D
FAX
Boot band tool
Installing boot bands
KV40107300
E
ZZA1229D
Commercial Service Tools EDS000ND
F
Tool name Description
G
1. Flare nut crowfoot
2. Torque wrench Removing and installing brake piping H
a: 10 mm (0.39 in)
S-NT360
I
J
K
L
M
FAX-5
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING PFP:00003
NVH Troubleshooting Chart EDS000NE
Use the chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
Refer to FAX-7, "FRONT WHEEL HUB AND KNUCKLE"
Refer to FAX-7, "FRONT WHEEL HUB AND KNUCKLE"
--
Reference page
NVH in WT section.
NVH in WT section.
NVH in PS section.
Improper installation, looseness
Wheel bearing damage
Parts interference
Possible cause and SUSPECTED PARTS
ROAD WHEEL
STEERING
TIRES
Noise
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo