Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Primera 2000.2005 Approved Nissan Primera 2005 ip
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ip documenatation <<
Text preview - extract from the document
INSTRUMENT PANEL
I BODY
A
B
SECTION
INSTRUMENT PANEL C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2
. DISPLAY ............................................................... 6
. F
Precautions for Supplemental Restraint System AUDIO UNIT ......................................................... 6
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- GLOVE BOX .................................................... .... 6
.
SIONER" ................................................................. 2
. INSTRUMENT LOWER PANEL ........................... 7 . G
Precautions ............................................................. 2
. INSTRUMENT LOWER ASSISTANCE PANEL..... 7
INSTRUMENT PANEL ASSEMBLY .......................... 3 . PASSENGER AIR BAG MODULE ................... .... 7 .
Component Parts Drawing ...................................... 3 . STEERING LOCK ESCUTCHEON ...................... 7 .
H
Removal and Installation ......................................... 4. STEERING COLUMN COVER ............................. 7 .
TABLE OF WORK ITEM ...................................... 4 . INSTRUMENT INNER COVER PROTECTOR ..... 7
METER FINISHER ............................................... 4 . INSTRUMENT LOWER DRIVER PANEL ......... .... 8 .
CLUSTER LID A .................................................. 5. GPS ANTENNA .................................................... 8 . IP
COMBINATION METER ...................................... 5 . FRONT PILLAR GARNISH .................................. 8 .
A/T OR M/T FINISHER ........................................ 5 . INSTRUMENT PANEL ......................................... 8 .
CONSOLE ............................................................ 5
. Disassembly and Assembly ................................. .... 8 . J
INSTRUMENT LOWER COVER .......................... 5 . INSTRUMENT FINISHER D, ASHTRAY AND
FRONT FLOOR CONSOLE ................................. 5 . AUDIO .................................................................. 8
.
INSTRUMENT FINISHER E ................................ 6 . GLOVE BOX .................................................... .... 9
.
K
CLUSTER LID C .................................................. 6.
L
M
IP-1
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS002FQ
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harness connec-
tors.
Precautions EIS002FR
q Disconnect both battery cables in advance.
q Disconnect air bag system line in advance.
q Never tamper with or force air bag lid open, as this may adversely affect air bag performance.
q Be careful not to scratch pad and other parts.
q When removing or disassembling any part, be careful not to damage or deform it. Protect parts, which
may get in the way with cloth.
q When removing parts with a screwdriver or other tool, protect parts by wrapping them with vinyl or tape.
q Keep removed parts protected with cloth.
q If a clip is deformed or damaged, replace it.
q If an unreusable part is removed, replace it with a new one.
q Tighten bolts and nuts firmly to the specified torque.
q After re-assembly has been completed, make sure each part functions correctly.
q Remove stains in the following way.
Water-soluble stains:
Dip a soft cloth in warm water, and then squeeze it tightly. After wiping the stain, wipe with a soft dry cloth.
Oil stain:
Dissolve a synthetic detergent in warm water (density of 2 to 3% or less), dip the cloth, then clean off the stain
with the cloth. Next, dip the cloth in fresh water and squeeze it tightly. Then clean off the detergent completely.
Then wipe the area with a soft dry cloth.
q Do not use any organic solvent, such as thinner or benzine.
IP-2
INSTRUMENT PANEL ASSEMBLY
INSTRUMENT PANEL ASSEMBLY PFP:68200
A
Component Parts Drawing EIS002FS
B
C
D
E
F
G
H
IP
J
K
L
M
MIIA0035E
1. Instrument cluster lid A 2. Combination meter finisher (LH) 3. Combination meter
4. Combination meter finisher (RH) 5. Steering lock escutcheon 6. Steering column cover
7. Instrument inner cover protector 8. Instrument panel & pad 9. Instrument lower driver panel
10. Instrument lower cover (RH) 11. Display 12. Instrument lower cover (LH)
13. Instrument lower assistance panel 14. Glove box striker 15. Instrument lower panel
16. Glove box 17. Glove box pin 18. A/T or M/T finisher
19. Front floor console 20. Audio unit (Instrument finisher D) 21. Instrument finisher E
22. Console finisher 23 Center console 24 Hazard switch
25. Cluster lid C
IP-3
INSTRUMENT PANEL ASSEMBLY
Removal and Installation EIS002FT
TABLE OF WORK ITEM
Navigation display
Components Instrument panel Combination meter Console
and Audio
Combination meter finisher [1] [1]
Instrument cluster lid A [2] [2]
Combination meter [3] [3]
A/T or M/T finisher [4] [1] [1]
Console [5] [2] [2]
Instrument lower cover [6] [3]
Front floor console [7] [4]
Instrument finisher E [8] [5]
Cluster lid C [9] [6]
Display [10] [7]
Audio [11] [8]
Glove box [12]
Instrument lower panel [13]
Glove box striker [14]
Instrument lower assistance panel [15]
Front passenger air bag module [16]
Steering lock escutcheon [17]
Steering column cover [18]
Instrument inner cover protector [20]
Instrument lower driver panel [20]
GPS antenna [21]
Front pillar garnish [22]
Instrument panel [23]
[ ]: The number shows the removal order.
METER FINISHER
q Insert a clip remover or similar tool into side of combination
meter finisher. Pull to remove it.
MIIA0036E
IP-4
INSTRUMENT PANEL ASSEMBLY
CLUSTER LID A
q Remove screws, and pull instrument cluster lid A forward to A
unfasten clips.
B
C
SIIA0415J D
COMBINATION METER
q Remove screws, and remove connectors. Then remove combination meter. E
A/T OR M/T FINISHER
q Insert a screwdriver, wrapped with a shop cloth, into cutout on
rearward of finisher, and lift up to unfasten metal clips. F
G
H
MIIA0037E
IP
CONSOLE
q Remove mounting screws and cap with screws and lift up to remove it.
INSTRUMENT LOWER COVER J
q Undo resin pawl on vehicle rear side by pulling to left side. Then
slide cover toward rear to remove. (Left side)
q Pull to vehicle right side and undo resin pawl to remove. (Right K
side)
L
M
MIIA0038E
FRONT FLOOR CONSOLE
q Remove screws and cap with screws, and remove front floor console.
IP-5
INSTRUMENT PANEL ASSEMBLY
INSTRUMENT FINISHER E
q Insert a screwdriver, wrapped with shop cloth, into the cutout on
instrument finisher E, and pull instrument finisher E downward to
remove.
SIIA0419J
CLUSTER LID C
1. Remove instrument finisher E, and remove screw.
2. Remove mounting screws of lower side.
3. Pull both sides of cluster lid C, unfasten lower side metal clips
and resin tabs.
4. Unfasten upper side metal clips, and remove cluster lid C.
5. Remove hazard switch connector and other connectors.
MIIA0039E
DISPLAY
q Remove screws and disconnect connector, and remove display unit.
AUDIO UNIT
q Remove screws and disconnect connectors, and remove audio unit.
NOTE:
When removal and installation, protect the audio unit from cracks or damage with a shop cloth or equiva-
lent.
GLOVE BOX
1. Open glove box, and remove dumper clip.
2. Remove glove box pin from inside, and remove glove box.
MIIA0040E
IP-6
INSTRUMENT PANEL ASSEMBLY
INSTRUMENT LOWER PANEL
q Remove clips. Then pull to remove instrument lower panel from A
blower unit lower side pawl.
B
C
SIIA0421J D
INSTRUMENT LOWER ASSISTANCE PANEL
1. Remove installation screws on glove box striker. E
2. Open lid, and remove passenger air bag module connector from
lid.
3. Remove screws, and pull straight foreward to remove instru- F
ment lower assistance panel.
4. Reconnect glove box lamp connector.
G
MIIA0041E
H
PASSENGER AIR BAG MODULE
q Reconnect passenger air bag module connector. Then remove mounting bolts, and remove passenger air
bag module. Refer to SRS-36, "FRONT PASSENGER AIR BAG MODULE" . IP
STEERING LOCK ESCUTCHEON
q Pull to remove steering lock escutcheon.
J
STEERING COLUMN COVER
q Remove steering lock escutcheon first. Remove screws.
INSTRUMENT INNER COVER PROTECTOR K
q Remove screws, and push instrument inner cover protector
straight forward to unfasten the pawl.
L
M
MIIA0109E
IP-7
INSTRUMENT PANEL ASSEMBLY
INSTRUMENT LOWER DRIVER PANEL
1. Remove screws, and pull driver-side instrument lower panel
straight forward to unfasten the clip.
2. Reconnect connectors and aspirator duct.
MIIA0042E
GPS ANTENNA
q Undo screws. Disconnect and remove connector.
FRONT PILLAR GARNISH
q Pull front pillar garnish straight forward to inner side of vehicle. Unfasten and remove metal clip. Refer to
EI-25, "BODY SIDE TRIM" .
INSTRUMENT PANEL
1. Remove key interlock cable. Refer to AT-402, "KEY INTERLOCK CABLE" .
2. Remove nuts, and lower steering column.
MIIA0043E
3. Remove bolts, nuts and screw from the instrument panel, and
remove the instrument panel.
NOTE:
When installing, check that the locating pin on back off the instru-
ment panel is completely seated in locating hole on body.
MIIA0044E
Disassembly and Assembly EIS002FU
INSTRUMENT FINISHER D, ASHTRAY AND AUDIO
1. Remove mounting screws, and remove instrument finisher D.
2. Remove mounting screws, and remove ashtray.
MIIA0045E
IP-8
INSTRUMENT PANEL ASSEMBLY
GLOVE BOX
q Remove screws, and remove glove box lock. A
B
C
MIIA0046E D
E
F
G
H
IP
J
K
L
M
IP-9
INSTRUMENT PANEL ASSEMBLY
IP-10
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo