Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Primera 2000.2005 Approved Nissan Primera 2005 lt
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download lt documenatation <<
Text preview - extract from the document
LIGHTING SYSTEM
K ELECTRICAL
A
B
SECTION
LIGHTING SYSTEM C
D
E
CONTENTS
PRECAUTION ........................................................... 4
. HEADLAMP (WITH DAYTIME) - CONVENTIONAL F
Precautions for Supplemental Restraint System TYPE - .................................................................... .. 18
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- System Description ................................................ 18 .
SIONER" ................................................................. 4
. DESCRIPTION ................................................... 18 . G
Precaution ............................................................... 4
. HEADLAMP OPERATION ................................. 18 .
Wiring Diagrams and Trouble Diagnosis ................. 4 . DAYTIME LIGHT OPERATION .......................... 18 .
HEADLAMP -CONVENTIONAL TYPE- .................... 5 . Schematic .............................................................. 19
.
H
System Description ................................................. 5
. Wiring Diagram -- H/LAMP -- .............................. 20 .
DESCRIPTION ..................................................... 5. Trouble Diagnoses ................................................ 23 .
LOW BEAM OPERATION .................................... 5 . Aiming Adjustment ............................................... .. 24 .
HIGH BEAM OPERATION/FLASH-TO-PASS Bulb Replacement ............................................... .. 24 . I
OPERATION ........................................................ 5
. HEADLAMP ...................................................... .. 24 .
Wiring Diagram -- H/LAMP -- ................................ 6 . CLEARANCE LAMP, FRONT TURN SIGNAL
Trouble Diagnoses .................................................. 7
. LAMP .................................................................. 24
. J
Aiming Adjustment .................................................. 7
. HEADLAMP (WITH DAYTIME) - XENON TYPE - ... 25
LOW BEAM .......................................................... 8
. System Description ................................................ 25 .
Bulb Replacement ................................................... 9
. Schematic .............................................................. 26
.
LT
HEADLAMP ......................................................... 9
. Wiring Diagram - DTRL - ....................................... 27 .
CLEARANCE LAMP, FRONT TURN SIGNAL Trouble Diagnoses ................................................ 30 .
LAMP ................................................................... 9
. DAYTIME LIGHT UNIT INSPECTION TABLE .. .. 30 .
Removal and Installation ......................................... 9 . Bulb Replacement ............................................... .. 30 . L
REMOVAL ............................................................ 9
. Aiming Adjustment ............................................... .. 30 .
INSTALLATION .................................................... 9. HEADLAMP AIMING CONTROL (MANUAL) ....... .. 31 .
HEADLAMP - XENON TYPE - ................................ 10 . Wiring Diagram -- H/AIM -- .................................. 31 . M
System Description ............................................... 10. Removal and Installation ....................................... 32 .
LOW BEAM OPERATION .................................. 10 . Switch Circuit Inspection ....................................... 32 .
HIGH BEAM OPERATION/FLASH-TO-PASS HEADLAMP AIMING CONTROL (AUTO) ............... 33 .
OPERATION ...................................................... 10. System Description ................................................ 33 .
Wiring Diagram - H/LAMP - ................................... 12 . Component Parts and Harness ............................. 33 .
Trouble Diagnosis ................................................. 14
. CONNECTOR LOCATION ................................. 33 .
Aiming Adjustment ................................................ 15. Wiring Diagram - H/AIM - ...................................... 34 .
LOW BEAM ........................................................ 15
. CONSULT-II ........................................................... 36.
Bulb Replacement ................................................. 16. CONSULT-II INSPECTION PROCEDURE ....... .. 36 .
XENON BULB (LOW BEAM) ............................. 16 . CONSULT-II DIAGNOSTIC TEST MODE FUNC-
HIGH BEAM ....................................................... 16
. TION ................................................................... 37
.
CLEARANCE LAMP, FRONT TURN SIGNAL INITIALIZATION ............................................... .. 37 .
LAMP ................................................................. 17
. SELF-DIAGNOSTIC RESULTS ITEM CHART ... 38
Removal and Installation ....................................... 17 . Check Power and Ground for Height Sensor ........ 38 .
REMOVAL .......................................................... 17
. Check Lighting Switch Circuit ................................ 39 .
INSTALLATION .................................................. 17 . Check Speed Signal Circuit Check ........................ 39 .
LT-1
Check Headlamp Aiming Motor ............................. 40 . Wiring Diagram -- F/FOG -- .................................72 .
Removal and installation ........................................ 41 . Aiming Adjustment ............................................... ..73 .
TURN SIGNAL AND HAZARD WARNING LAMPS... 42 Bulb Replacement ..................................................73 .
System Description ................................................ 42 . Removal and Installation ........................................73 .
TURN SIGNAL OPERATION .............................. 42 . REMOVAL ...........................................................73 .
HAZARD LAMP OPERATION ............................ 43 . INSTALLATION ...................................................74 .
MULTI-REMOTE CONTROL SYSTEM OPERA- REAR FOG LAMP ....................................................75 .
TION ................................................................... 43
. Wiring Diagram -- R/FOG -- /Without Front Fog
Wiring Diagram -- TURN -- .................................. 45 . Lamp .................................................................... ..75
.
Terminal and Reference Valve for Smart Entrance Wiring Diagram -- R/FOG -- /With Front Fog Lamp...76
Control Unit ............................................................ 47
. Bulb Replacement (Sedan) ....................................79 .
Turn Signal And Hazard Warning Lamp Do Not Bulb Replacement (Wagon) ................................. ..79 .
Operate .................................................................. 47
. Removal and Installation ........................................79 .
Turn Signal Lamps Do Not Operate But Hazard REMOVAL (SEDAN) ...........................................79 .
Warning Lamp Do Operate .................................... 48 . INSTALLATION (SEDAN) ................................. ..79 .
Hazard Warning Lamps Do Not Operate But Turn CLEARANCE LAMP/TAIL LAMP .......................... ..80 .
Signal Lamp Do Operate ....................................... 49 . Bulb Replacement (Clearance Lamp) ....................80 .
Turn Signal Lamps LH Do Not Operate ................. 51 . Bulb Replacement (Tail Lamp) ...............................80 .
Turn Signal Lamps RH Do Not Operate ................ 52 . Removal and Installation of Clearance Lamp ........80 .
LH and RH Turn Indicators Do Not Operate .......... 53 . Removal and Installation of Tail Lamp ...................80 .
Bulb Replacement ................................................. 54 . HIGH-MOUNTED STOP LAMP ................................81 .
FRONT TURN SIGNAL LAMP ........................... 54 . Bulb Replacement ..................................................81 .
SIDE TURN SIGNAL LAMP ............................... 54 . HIGH-MOUNTED STOP LAMP (SEDAN) ..........81 .
REAR TURN SIGNAL LAMP .............................. 54 . HIGH-MOUNTED STOP LAMP (WAGON) ....... ..81 .
Removal and Installation for Side Turn Signal Lamp 54 ... Removal and Installation ........................................81 .
Removaland Installation for Rear Turn Signal Lamp 54 ... HIGH-MOUNTED STOP LAMP (SEDAN) ..........81 .
LIGHTING AND TURN SIGNAL SWITCH ............... 55 . HIGH-MOUNTED STOP LAMP (WAGON) ....... ..81 .
Removal and Installation ....................................... 55 . REAR COMBINATION LAMP ..................................82 .
Switch Circuit Inspection ....................................... 55 . Wiring Diagram --STOP/L-- .................................82 .
HAZARD SWITCH ................................................... 56 . Bulb Replacement (Sedan) ....................................84 .
Removal and Installation ....................................... 56 . Bulb Replacement (Wagon) ................................. ..84 .
REMOVAL .......................................................... 56. Removal and Installation ........................................84 .
INSTALLATION ................................................... 56 . REMOVAL (SEDAN) ...........................................84 .
STOP LAMP ............................................................. 57
. INSTALLATION ...................................................84 .
Wiring Diagram -- STOP/L -- ............................... 57 . COMBINATION SWITCH .........................................86 .
Bulb Replacement ................................................. 59 . Removal and Installation ........................................86 .
STOP LAMP ....................................................... 59 . Switch Circuit Inspection ........................................87 .
Removal and Installation ....................................... 59 . ILLUMINATION .........................................................89 .
STOP LAMP ....................................................... 59 . System Description ................................................89 .
BACK-UP LAMP ...................................................... 60 . Schematic ..............................................................90
.
Wiring Diagram -- BACK/L -- ............................... 60 . Wiring Diagram .................................................... ..91.
Bulb Replacement (Sedan) ................................... 62 . INTERIOR ROOM LAMP .........................................96 .
Bulb Replacement (Wagon) ................................... 62 . System Description ................................................96 .
Removal and Installation (Sedan) .......................... 62 . POWER SUPPLY AND GROUND ......................96 .
Removal and Installation (Wagon) ......................... 62 . SWITCH OPERATION ........................................97 .
PARKING, LICENSE PLATE AND TAIL LAMPS ..... 63 . INTERIOR ROOM LAMP TIMER OPERATION...97
Wiring Diagram - TAIL/L -/LHD MODELS .............. 63 . ON-OFF CONTROL .......................................... ..97 .
Wiring Diagram - TAIL/L -/RHD MODELS ............. 66 . Schematic ..............................................................98
.
Bulb Replacement ................................................. 69 . Wiring Diagram - ROOM/L -/LHD MODELS ..........99 .
PARKING AND TAIL LAMPS .............................. 69 . Wiring Diagram - ROOM/L -/RHD MODELS ........ 103 .
LICENSE PLATE LAMP ..................................... 69 . Terminal and Reference Valve for Smart Entrance
Removal and Installation ....................................... 69 . Control Unit .......................................................... 107
.
PARKING AND TAIL LAMPS .............................. 69 . CONSULT-II Inspection Procedure ...................... 107 .
LICENSE PLATE LAMP ..................................... 69 . "ROOM LAMP" .................................................. 107 .
FRONT FOG LAMP ................................................. 71 . CONSULT-II Application Items ............................. 108 .
System Description ................................................ 71 . ROOM LAMP .................................................... 108 .
DESCRIPTION ................................................... 71 . Interior Room Lamp Timer Does Not Operate ..... 109 .
FOG LAMP OPERATION ................................... 71 . Interior Room Lamp Timer Does Not Cancel ....... 114 .
LT-2
Bulb Replacement ................................................118 . CAN Communication Unit For LHD Models without
INTERIOR ROOM LAMP ..................................118 . Tyre Pressure Monitoring System ....................... 132 . A
STEP LAMP ......................................................119. TYPE 7 ............................................................. 133
.
ASHTRAY .........................................................119
. TYPE 8 ............................................................. 134
.
Removal and Installation ......................................119 . TYPE 9 ............................................................. 135
. B
INTERIOR ROOM LAMP ..................................119 . TYPE 10 ........................................................... 136
.
STEP LAMP ......................................................119. TYPE 11 ........................................................... 137
.
ASHTRAY .........................................................119
. TYPE 12 ........................................................... 138
.
SPOT, VANITY MIRROR AND TRUNK (LUGGAGE) CAN Communication Unit For RHD Models with C
ROOM LAMPS ...................................................... 120 . Tyre Pressure Monitoring System ....................... 139 .
Wiring Diagram -- INT/L -- ................................ 120 . TYPE 13 ........................................................... 140
.
Bulb Replacement ............................................... 123 . TYPE 14 ........................................................... 141
. D
SPOT LAMP ..................................................... 123. TYPE 15 ........................................................... 142
.
TRUNK ROOM LAMP ...................................... 123 . TYPE 16 ........................................................... 143
.
LUGGAGE ROOM LAMP ................................ 123 . TYPE 17 ........................................................... 144
. E
Removal and Installation ..................................... 123 . TYPE 18 ........................................................... 145
.
SPOT LAMP ..................................................... 123. CAN Communication Unit For RHD Models without
TRUNK ROOM LAMP ...................................... 123 . Tyre Pressure Monitoring System ....................... 146 .
LUGGAGE ROOM LAMP ................................ 124 . TYPE 19 ........................................................... 147
. F
CAN COMMUNICATION ....................................... 125 . TYPE 20 ........................................................... 148
.
System Description ............................................. 125 . TYPE 21 ........................................................... 149
.
CANCommunicationUnitForLHDModelswith Tyre TYPE 22 ........................................................... 150
. G
Pressure Monitoring System ............................... 125 . TYPE 23 ........................................................... 151
.
TYPE 1 ............................................................. 126
. TYPE 24 ........................................................... 152
.
TYPE 2 ............................................................. 127
. BULB SPECIFICATIONS ....................................... 153 . H
TYPE 3 ............................................................. 128
. Headlamp ............................................................ 153
.
TYPE 4 ............................................................. 129
. Exterior Lamp ...................................................... 153
.
TYPE 5 ............................................................. 130
. Interior Lamp/Illumination .................................... 153 .
I
TYPE 6 ............................................................. 131
.
J
LT
L
M
LT-3
PRECAUTION
PRECAUTION PFP:00011
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EKS003T7
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harness connec-
tors.
Precaution EKS003T8
q Do not touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Do not
touch bulb by hand while it is lit or right after being turned off. Burning may result.
q Do not leave bulb out of headlamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of the headlamp. When replacing the bulb, be sure to replace it with a new one.
q Adjust aiming by tightening aiming screw. (To adjust it toward loosening side, first loosen adjusting screw,
and then make adjustment by tightening.)
q To remove soil or sealant of bulbs, do not use organic solvent (thinner, gasoline, etc.)
q When replacing bulb, be sure to hold bulb socket and pull it out straight. If wiring harness of the bulb is
pulled at an angle, the bulb may be caught in the lamp, making it difficult to take out.
Wiring Diagrams and Trouble Diagnosis EKS003T9
When you read wiring diagrams, refer to the following:
q Refer to GI-14, "How to Read Wiring Diagrams" in GI section
q Refer to PG-3, "POWER SUPPLY ROUTING" for power distribution circuit in PG section
When you perform trouble diagnosis, refer to the following:
q Refer to GI-11, "HOW TO FOLLOW TEST GROUPS IN TROUBLE DIAGNOSES" in GI section
q Refer toGI-24, "How to Perform Efficient Diagnosis for an Electrical Incident" in GI section
LT-4
HEADLAMP -CONVENTIONAL TYPE-
HEADLAMP -CONVENTIONAL TYPE- PFP:26010
A
System Description EKS004P6
DESCRIPTION
The headlamps are controlled by the lighting switch which is built into the combination switch. B
Power is supplied at all times
q to lighting switch terminal 8
q through 15A fuse (No. 41, located in the fuse and fusible link box), and C
q to lighting switch terminal 5
q through 15A fuse (No. 42, located in the fuse and fusible link box).
LOW BEAM OPERATION D
When the lighting switch is turned to the 2ND position and placed in LOW ("B") position, power is supplied
q from lighting switch terminal 10
E
q to terminal 5 of the headlamp LH, and
q from lighting switch terminal 7
q to terminal 5 of the headlamp RH. F
Terminal 2 of each headlamp supplies ground through body grounds E10 and E58.
With power and ground supplied, the low beams will illuminate.
HIGH BEAM OPERATION/FLASH-TO-PASS OPERATION G
When the lighting switch is turned to the 2ND position and placed in HIGH ("A") position or PASS ("C") posi-
tion, power is supplied
q from lighting switch terminal 9 H
q to terminal 4 of headlamp LH, and
q to combination meter terminal 20 (LHD models) or 7 (RHD models) for the HIGH BEAM indicator.
I
q from lighting switch terminal 6
q to terminal 4 of headlamp RH.
Ground is supplied to terminal 21 (LHD models) or 8 (RHD models) of the combination meter through body J
grounds M16, M50 and M70.
Ground is supplied to terminal 2 of each headlamp through body grounds E10 and E58.
With power and ground supplied, the high beams and the HIGH BEAM indicator illuminate.
LT
L
M
LT-5
HEADLAMP -CONVENTIONAL TYPE-
Wiring Diagram -- H/LAMP -- EKS004P7
MKWA0001E
LT-6
HEADLAMP -CONVENTIONAL TYPE-
Trouble Diagnoses EKS004P8
A
Symptom Possible cause Repair order
1. Check bulb.
1. Bulb 2. Check grounds E10 and E58. B
2. Grounds E10 and E58 3. Check 15A fuse (No. 41, located in fuse
LH headlamps do not operate. and fusible link box).
3. 15A fuse
Verify battery positive voltage is present
4. Lighting switch C
at terminal 8 of lighting switch.
4. Check lighting switch.
1. Check bulb.
D
1. Bulb 2. Check grounds E10 and E58.
2. Grounds E10 and E58 3. Check 15A fuse (No. 42, located in fuse
RH headlamps do not operate. and fusible link box).
3. 15A fuse E
Verify battery positive voltage is present
4. Lighting switch at terminal 5 of lighting switch.
4. Check lighting switch.
F
1. Check bulb.
1. Bulb 2. Check continuity between lighting switch
LH high beam does not operate, but LH
2. Open in LH high beams circuit terminal 9 (BR/R) and LH headlamp ter-
low beam operates. G
3. Lighting switch minal 4 (BR/R) for an open circuit.
3. Check lighting switch.
1. Check bulb.
1. Bulb H
2. Check continuity between lighting switch
LH low beam does not operate, but LH
2. Open in LH low beam circuit terminal 10 (R/Y) and LH headlamp ter-
high beam operates.
3. Lighting switch minal 5 (R/Y) for an open circuit.
3. Check lighting switch. I
1. Check bulb.
1. Bulb 2. Check continuity between lighting switch
RH high beam does not operate, but RH J
2. Open in RH high beams circuit terminal 6 (Y) and RH headlamp termi-
low beam operates.
3. Lighting switch nal 4 (Y) for an open circuit.
3. Check lighting switch.
1. Check bulb.
LT
1. Bulb 2. Check continuity between lighting switch
RH low beam does not operate, but RH
2. Open in RH low beam circuit terminal 7 (PV) and RH headlamp termi-
high beam operates.
3. Lighting switch nal 5 (PV) for an open circuit. L
3. Check lighting switch.
1. Check bulb in combination meter.
2. Check grounds M16, M50 and M70.
M
1. Bulb
High beam indicator does not work. 2. Grounds M16, M50 and M70 3. Check continuity between lighting switch
terminal 9 (BR/R) and combination
3. Open in high beam circuit
meter terminal 20 (BR/R) LHD or 7 (BR/
R) RHD for an open circuit.
Aiming Adjustment EKS004P9
When performing headlamp aiming adjustment, use an aiming machine, aiming wall screen or headlamp
tester. Aimers should be in good repair, calibrated and operated in accordance with respective operation man-
uals.
If any aimer is not available, aiming adjustment can be done as follows:
For details, refer to the regulations in your own country.
q Keep all tires inflated to correct pressures.
q Place vehicle and tester on one and same flat surface.
q See that there is no-load in vehicle (coolant, engine oil filled up to correct level and full fuel tank) other
than the driver (or equivalent weight placed in drivers position).
LT-7
HEADLAMP -CONVENTIONAL TYPE-
CAUTION:
Be sure aiming switch is set to "0" when performing aiming adjustment.
LOW BEAM
1. Turn headlamp low beam on.
LHD models
MKIA0048E
RHD models
MKIA0049E
2. Use adjusting pots to perform aiming adjustment.
q First tighten the adjusting pot all the way and then make adjustment by loosening the pot.
If the vehicle front body has been repaired and/or the headlamp assembly has been replaced, check aim-
ing. Use the aiming chart shown in the figure.
q Adjust headlamps so that main axis of light is parallel to cen-
ter line of body and is aligned with point P shown in illustra-
tion.
q Figure to the left shows headlamp aiming pattern for driving
on right side of road; for driving on left side of road, aiming
pattern is reversed.
q Dotted lines to point P in illustration show center of headlamp.
"H" : Horizontal center line of headlamps
"WL : Distance between each headlamp center
"
"L" : 25 m (98.43 in)
"C" : 250 mm (9.84 in)
qBasic illuminating area for adjustment should be within the
range shown in the figure. Adjust headlamps accordingly.
CAUTION:
Be sure aiming switch is set to "0" when preforming aiming
adjustment.
SEL254L
LT-8
HEADLAMP -CONVENTIONAL TYPE-
Bulb Replacement EKS004PA
HEADLAMP A
1. Disconnect connector of headlamp.
2. Unlock retaining spring, then remove bulb.
B
Headlamp (Low) : 12V - 55W (H7)
Headlamp (High) : 12V - 55W (H7)
C
D
MKIB0116E
CLEARANCE LAMP, FRONT TURN SIGNAL LAMP
E
1. Turn the bulbsocket counterclockwise and unlock it.
2. Remove the bulb from its socket.
Clearance lamp : 12V - 5W F
Front turn signal lamp : 12V - 21W
CAUTION:
G
q Do not touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
q Do not leave bulb out of headlamp reflector for a long time because dust, moisture smoke, etc.
may affect the performance of headlamp. When replacing bulb, be sure to replace it with new one. H
q When bulb is installed, be sure to lock rubber cap to ensure watertightness.
Removal and Installation EKS004PB I
REMOVAL
1. Disconnect connector of headlamp and clearance lamp.
2. Remove the front grille. Refer to EI-12, "FRONT GRILL" . J
3. Remove the headlamp mounting bolts.
4. Pull the headlamp toward the front of the vehicle.
LT
L
MKIB0117E
INSTALLATION M
q Install in the reverse order of removal, taking care of the following points.
Headlamp mounting screws and nut
Tightening torque : 4.4 - 5.8 N◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo