Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Primera 2000.2005 Approved Nissan Primera 2005 rf
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download rf documenatation <<Text preview - extract from the documentROOF
I BODY
A
B
SECTION
ROOF C
D
E
CONTENTS
SUNROOF ................................................................. 2
. Fitting Adjustment .................................................... 4
. F
Precautions ............................................................. 2
. LONGITUDINAL/LATERAL CLEARANCE
System Description ................................................. 2
. ADJUSTMENT ..................................................... 4
.
RESUMING OPERATION .................................... 2 . SURFACE MISMATCH ADJUSTMENT ............... 5 . G
Component Parts Location ...................................... 2 . Removal and Installation ......................................... 6
.
Wiring Diagram -- SROOF -- ................................ 3 . SUNROOF UNIT .................................................. 7
.
Terminal and Reference Value for Sunroof Switch 4 ..... GLASS LID ........................................................... 8
.
H
Sunroof Lid Weatherstrip Inspection ....................... 4 . SUNSHADE ......................................................... 9
.
Link and Wire Assembly Inspection ........................ 4 . SUNROOF MOTOR ........................................... 10 .
RF
J
K
L
M
RF-1
SUNROOF
SUNROOF PFP:91210
Precautions EIS002FG
q If sunroof motor operation sound is noted but sunroof does not operate, replace motor assembly with
glass lid fully closed.
q If sunroof (glass lid and motor) does not operate when using sunroof switch then remove the front cover of
the luggage compartment, and rotate motor gear box drive shaft with the emergency handle (in the tool
box).
System Description EIS002FH
q Operating sunroof switch allows glass lid open/close, and tilt UP and DOWN.
q When sunroof switch is pressed firmly toward the OPEN side, glass lid automatically opens and automatic
operation is stopped at a point 135 mm (5.31 in) to the fully closed position.
NOTE:
After the emergency handle is used to rotate the motor drive shaft, sunroof switch operation may not cor-
respond to actual glass lid movement. When this happens, conduct resuming operation to restore normal
operation.
RESUMING OPERATION
q If actual glass lid operation does not correspond to expected
operation, operate sunroof switch to slide glass lid toward area
A in the figure. This should result in resumption of normal opera-
tion.
CAUTION:
Before normal operation is resumed, expected sunroof
switch operation and actual glass lid movement may not
correspond. Make sure that neither head nor hands pro-
trude from sunroof and conduct resuming operation.
MIIA0058E
Component Parts Location EIS002FI
MIIA0047E
RF-2
SUNROOF
Wiring Diagram -- SROOF -- EIS002FJ
A
B
C
D
E
F
G
H
RF
J
K
L
M
MKWA0275E
RF-3
SUNROOF
Terminal and Reference Value for Sunroof Switch EIS002FK
TERMI- WIRE
ITEM CONDITION VOLTAGE
NAL COLOR
Sunroof tilt DOWN or OPEN sig- Sunroof switch tilt DOWN or OPEN oper- Approx. 0 Approx.
1 L/B
nal ation 12
2 Y/G IGN power supply -- Battery voltage
Sunroof switch tilt UP or CLOSE opera- Approx. 0 Approx.
3 L/R Sunroof tilt UP or CLOSE signal
tion 12
Sunroof Lid Weatherstrip Inspection EIS002FM
If there is water leakage around glass lid, close glass lid and flush with water to determine whether it is from
damaged parts or a gap.
1. Remove glass lid assembly.
2. Visually check weatherstrip for damage, deterioration, or deformation. If excess wear or damage is
detected, replace glass lid assembly.
Link and Wire Assembly Inspection EIS002FN
1. If the link coating peels off to show the base material and an abnormal noise is heard, replace it.
2. Visually confirm the wire and rail groove are properly greased. If necessary, apply body grease.
Fitting Adjustment EIS002FO
MIIA0048E
LONGITUDINAL/LATERAL CLEARANCE ADJUSTMENT
1. Tilt up glass lid to remove side trim upper and lower.
2. After loosening glass lid mounting bolts (Torx bolt: T25, 3 each on left/right), tilt down glass lid.
3. Adjust glass lid according to sections A
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo