Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Quest 2004-2009 Approved Nissan Quest 2004 FAX
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download FAX documenatation <<Text preview - extract from the documentD DRIVELINE/AXLE
A
B
SECTION
FRONT AXLE C
FAX
E
CONTENTS
PRECAUTIONS ......................................................... 2
. INSPECTION AFTER REMOVAL ........................ 9 . F
Precautions ............................................................. 2
. INSTALLATION .................................................... 9 .
PREPARATION .......................................................... 3
. Removal and Installation (Right Side) ..................... 9 .
Special Service Tools .............................................. 3
. REMOVAL .......................................................... 10
. G
Commercial Service Tools ....................................... 3 . INSPECTION AFTER REMOVAL ...................... 10 .
NOISE, VIBRATION, AND HARSHNESS (NVH) INSTALLATION .................................................. 10 .
TROUBLESHOOTING ............................................... 4 . Disassembly and Assembly (Left Side) ................. 11 .
H
NVH Troubleshooting Chart .................................... 4 . DISASSEMBLY .................................................. 11 .
FRONT WHEEL HUB AND KNUCKLE ..................... 5 . INSPECTION AFTER DISASSEMBLY ............... 13 .
On-Vehicle Inspection and Service ......................... 5 . ASSEMBLY ........................................................ 13.
FRONT WHEEL BEARING .................................. 5 . Disassembly and Assembly (Right Side) ............... 17 . I
Removal and Installation ......................................... 5. DISASSEMBLY .................................................. 17 .
REMOVAL ............................................................ 5
. INSPECTION AFTER DISASSEMBLY ............... 19 .
INSPECTION AFTER REMOVAL ........................ 6 . ASSEMBLY ........................................................ 20. J
INSTALLATION .................................................... 6
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 23 .
FRONT DRIVE SHAFT .............................................. 8 . Wheel Bearing ....................................................... 23
.
Removal and Installation (Left Side) ....................... 8 . Drive Shaft ............................................................. 23
.
K
REMOVAL ............................................................ 8
. Damper .................................................................. 23
.
L
M
Revision: January 2005 FAX-1 2004 Quest
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions EDS000WC
CAUTION:
q When installing each rubber part, the final tightening must be carried out under unladen condi-
tion* with tires on the ground.
*Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated posi-
tions.
q After installing the removed suspension parts, check the front wheel alignment.
q Do not jack up the vehicle by the transverse link .
Observe the following precautions when disassembling and servicing drive shaft.
q Perform work in a location which is as dust-free as possible.
q Before disassembling and servicing, clean the outside of parts.
q Prevention of the entry of foreign objects must be taken into account during disassembly of the service
location.
q Disassembled parts must be carefully reassembled in the correct order. If work is interrupted, a clean
cover must be placed over parts.
q Paper shop cloths must be used. Fabric shop cloths must not be used because of the danger of lint adher-
ing to parts.
q Disassembled parts (except for rubber parts) should be cleaned with kerosene which shall be removed by
blowing with air or wiping with paper shop cloths.
Revision: January 2005 FAX-2 2004 Quest
PREPARATION
PREPARATION PFP:00002
A
Special Service Tools EDS000WD
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description B
(Kent-Moore No.)
Tool name
HT72520000 Removing outer tie-rod end and lower ball C
(J25730-A) joint
Ball joint remover
FAX
NT146
E
KV38106700 Installing drive shaft
(J34296) LH: KV38106700 (J34296)
KV38106800 RH: KV38106800 (J34297)
(J34297) F
Differential side oil seal protector
NT147 G
KV40107500 Removing drive shaft
( -- )
Drive shaft attachment H
I
ZZA1230D
Commercial Service Tools EDS000WE
J
Tool name Description
Power tool Loosening bolts and nuts
K
L
PBIC0190E
M
Revision: January 2005 FAX-3 2004 Quest
Symptom
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo