Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Quest 2004-2009 Approved Nissan Quest 2004 IP

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download IP documenatation <<

Text preview - extract from the document

I BODY

B
SECTION
INSTRUMENT PANEL C

E
CONTENTS
PRECAUTIONS ......................................................... 2
. CONFIRM THE REPAIR ...................................... 6 . F
Precautions for Supplemental Restraint System Generic Squeak and Rattle Troubleshooting ........... 6 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- INSTRUMENT PANEL ......................................... 6 .
SIONER" ................................................................. 2
. CENTER CONSOLE ............................................ 6 . G
PREPARATION .......................................................... 3
. DOORS ................................................................ 6
.
Special Service Tools .............................................. 3
. TRUNK ................................................................. 7
.
Commercial Service Tools ....................................... 3 . SUNROOF/HEADLINING .................................... 7 .
H
SQUEAK AND RATTLE TROUBLE DIAGNOSIS ..... 4 OVERHEAD CONSOLE (FRONT AND REAR)..... 7
Work Flow ............................................................... 4
. SEATS .................................................................. 7
.
CUSTOMER INTERVIEW .................................... 4 . UNDERHOOD ...................................................... 7 .
DUPLICATE THE NOISE AND TEST DRIVE ...... 5 . Diagnostic Worksheet .............................................. 8. IP
CHECK RELATED SERVICE BULLETINS .......... 5 . INSTRUMENT PANEL ASSEMBLY ........................ 10 .
LOCATE THE NOISE AND IDENTIFY THE Removal and Installation ....................................... 10 .
ROOT CAUSE ..................................................... 5. REMOVAL AND INSTALLATION ....................... 11 . J
REPAIR THE CAUSE .......................................... 5 .

Revision: January 2005 IP-1 2004 Quest
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS001Z9

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.

Revision: January 2005 IP-2 2004 Quest
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools EIS001W5

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number B
(Kent-Moore No.) Description
Tool name
(J-39570) Locating the noise C
Chassis ear

SBT839 F
(J-43980) Repairing the cause of noise
NISSAN Squeak and Rattle kit
G

SBT840

Commercial Service Tools EIS001W6 J

(Kent-Moore No.)
Description
Tool name
K
(J-39565) Locating the noise
Engine ear

SIIA0995E M
Power tool Loosening bolts and nuts

PBIC0191E

Revision: January 2005 IP-3 2004 Quest
SQUEAK AND RATTLE TROUBLE DIAGNOSIS

SQUEAK AND RATTLE TROUBLE DIAGNOSIS PFP:00000

Work Flow EIS001W7

SBT842

CUSTOMER INTERVIEW
Interview the customer, if possible, to determine the conditions that exist when the noise occurs. Use the Diag-
nostic Worksheet during the interview to document the facts and conditions when the noise occurs and any
customer's comments; refer to IP-4, "CUSTOMER INTERVIEW" . This information is necessary to duplicate
the conditions that exist when the noise occurs.
q The customer may not be able to provide a detailed description or the location of the noise. Attempt to
obtain all the facts and conditions that exist when the noise occurs (or does not occur).
q If there is more than one noise in the vehicle, be sure to diagnose and repair the noise that the customer
is concerned about. This can be accomplished by test driving the vehicle with the customer.
q After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so the customer, service adviser and technician are all speaking the same language when
defining the noise.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo