Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Quest 2004-2009 Approved Nissan Quest 2005 EI

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download EI documenatation <<

Text preview - extract from the document

I BODY

B
SECTION
EXTERIOR & INTERIOR C

E
CONTENTS
PRECAUTIONS ......................................................... 2
. FENDER PROTECTOR ........................................... 21 . F
Precautions for Supplemental Restraint System Removal and Installation ....................................... 21.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- FRONT ............................................................... 21
.
SIONER" ................................................................. 2
. LICENSE LAMP FINISHER ..................................... 22 . G
Precautions ............................................................. 2
. Removal and Installation ....................................... 22.
PREPARATION .......................................................... 3
. ROOF RACK ............................................................ 23
.
Special Service Tools .............................................. 3
. Removal and Installation ....................................... 23.
H
Commercial Service Tools ....................................... 3 . ROOF SIDE MOLDING ............................................ 24 .
SQUEAK AND RATTLE TROUBLE DIAGNOSIS ..... 4 Removal and Installation ....................................... 24.
Work Flow ............................................................... 4
. DOOR OUTSIDE MOLDING .................................... 25 .
CUSTOMER INTERVIEW .................................... 4 . Removal and Installation ....................................... 25. EI
DUPLICATE THE NOISE AND TEST DRIVE ...... 5 . FRONT DOOR OUTSIDE MOLDING ................. 25 .
CHECK RELATED SERVICE BULLETINS .......... 5 . SIDE GUARD MOLDING ......................................... 26 .
LOCATE THE NOISE AND IDENTIFY THE Removal and Installation ....................................... 26. J
ROOT CAUSE ..................................................... 5 . REMOVAL .......................................................... 26
.
REPAIR THE CAUSE .......................................... 5 . INSTALLATION .................................................. 26.
CONFIRM THE REPAIR ...................................... 6 . DOOR FINISHER ..................................................... 28
.
K
Generic Squeak and Rattle Troubleshooting .......... 6 . Removal and Installation ....................................... 28.
INSTRUMENT PANEL ......................................... 6 . FRONT DOOR ................................................... 28 .
CENTER CONSOLE ............................................ 6 . SLIDING DOOR ................................................. 29 .
DOORS ................................................................ 6
. BODY SIDE TRIM .................................................... 30
. L
BACK DOOR ........................................................ 7
. Removal and Installation ....................................... 30.
SUNROOF/HEADLINER ...................................... 7 . LEFT SIDE ......................................................... 30
.
OVERHEAD CONSOLE (FRONT AND REAR)..... 7 RIGHT SIDE AND REAR ................................... 32 . M
SEATS .................................................................. 7
. CENTER PILLAR LOWER FINISHER ............... 33 .
UNDERHOOD ...................................................... 7 . CENTER PILLAR UPPER FINISHER ................ 33 .
Diagnostic Worksheet ............................................. 8 . REAR CENTER PILLAR FINISHER ................... 33 .
CLIP AND FASTENER ............................................ 10 . DASH SIDE FINISHER ...................................... 33 .
Description ............................................................ 10
. FRONT PILLAR FINISHER ................................ 33 .
FRONT BUMPER .................................................... 13 . REAR LOWER FINISHER ASSEMBLY ............. 34 .
Removal and Installation ....................................... 13 . REAR PILLAR UPPER FINISHER ..................... 34 .
REAR BUMPER ...................................................... 15 . BACK DOOR LOWER FINISHER ...................... 34 .
Removal and Installation ....................................... 15 . BACK DOOR UPPER FINISHER ....................... 34 .
FRONT GRILLE ....................................................... 17
. FLOOR TRIM ........................................................... 35
.
Removal and Installation ....................................... 17 . Removal and Installation ....................................... 35.
COWL TOP .............................................................. 18
. HEADLINING ........................................................... 36
.
Removal and Installation ....................................... 18 . Removal and Installation ....................................... 36.
FRONT FENDER ..................................................... 20 .
Removal and Installation ....................................... 20 .

Revision: September 2004 EI-1 2005 Quest
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS001VA

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Precautions EIS001VB

q When removing or disassembling any part, be careful not to damage or deform it. Protect parts which may
get in the way with cloth.
q When removing parts with a screwdriver or other tool, protect parts by wrapping them with vinyl or tape.
q Keep removed parts protected with cloth.
q If a clip is deformed or damaged, replace it.
q If an unreusable part is removed, replace it with a new one.
q Tighten bolts and nuts firmly to the specified torque.
q After re-assembly has been completed, make sure each part functions correctly.
q Remove stains in the following way.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo