Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Quest 2004-2009 Approved Nissan Quest 2006 SC

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download SC documenatation <<

Text preview - extract from the document

K ELECTRICAL

B
SECTION
STARTING & CHARGING SYSTEM C

E
CONTENTS
PRECAUTIONS ......................................................... 2 . DIAGNOSTIC PROCEDURE 1 .......................... 15 . F
Precautions for Supplemental Restraint System DIAGNOSTIC PROCEDURE 2 .......................... 16 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- MINIMUM SPECIFICATION OF CRANKING
SIONER" ................................................................. 2. VOLTAGE REFERENCING COOLANT TEM- G
PREPARATION .......................................................... 3 . PERATURE ........................................................ 17 .
Special Service Tool ................................................ 3 . Removal and Installation ....................................... 17 .
Commercial Service Tools ....................................... 3 . 4-SPEED A/T MODELS ..................................... 17 .
H
BATTERY ................................................................... 4
. 5-SPEED A/T MODELS ..................................... 17 .
How to Handle Battery ............................................ 4 . Disassembly and Assembly ................................... 19 .
METHODS OF PREVENTING OVER-DIS- Inspection After Disassembly ................................ 20 .
CHARGE .............................................................. 4 . PINION/CLUTCH CHECK .................................. 20 . I
CHECKING ELECTROLYTE LEVEL ................... 4 . CHARGING SYSTEM .............................................. 21 .
SPECIFIC GRAVITY CHECK .............................. 5 . System Description ................................................ 21 .
CHARGING THE BATTERY ................................ 6 . Wiring Diagram -- CHARGE -- ............................ 22 . J
Trouble Diagnoses with Battery/Starting/Charging Trouble Diagnoses with Battery/Starting/Charging
System Tester ......................................................... 6 . System Tester ........................................................ 23.
DIAGNOSTIC RESULT ITEM CHART ................. 8 . DIAGNOSTIC RESULT ITEM CHART ............... 24 . SC
Removal and Installation ......................................... 9 . WORK FLOW ..................................................... 25 .
REMOVAL ............................................................ 9 . DIAGNOSTIC PROCEDURE 1 .......................... 26 .
INSTALLATION .................................................... 9 . DIAGNOSTIC PROCEDURE 2 .......................... 27 .
STARTING SYSTEM ............................................... 10 . DIAGNOSTIC PROCEDURE 3 .......................... 28 . L
System Description ............................................... 10 . MALFUNCTION INDICATOR ............................. 29 .
........................................................................... 10
. Removal and Installation ....................................... 29 .
Wiring Diagram -- START -- .................................11 . REMOVAL .......................................................... 29 . M
4-SPEED A/T MODEL ........................................11 . INSTALLATION .................................................. 29 .
5-SPEED A/T MODEL ....................................... 12 . SERVICE DATA AND SPECIFICATIONS (SDS) ..... 30 .
Trouble Diagnoses with Battery/Starting/Charging Battery ................................................................... 30
.
System Tester ....................................................... 13 . Starter .................................................................... 30
.
DIAGNOSTIC RESULT ITEM CHART ............... 13 . Generator .............................................................. 30
.
WORK FLOW ..................................................... 14 .

Revision: July 2006 SC-1 2006 Quest
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EKS00FA4

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.

Revision: July 2006 SC-2 2006 Quest
PREPARATION

PREPARATION PFP:00002
A
Special Service Tool EKS00FA6

Tool number
Description
Tool name B
J-44373 Model 620
Battery/Starting/Charging system
tester
C

D
SEL403X

F
Commercial Service Tools EKS00FA7

Tool number
Description G
Tool name
Power tool Loosening bolts and nuts

I
PBIC0190E

Revision: July 2006 SC-3 2006 Quest
BATTERY

BATTERY PFP:AYBGL

How to Handle Battery EKS00FA8

CAUTION:
q If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt
booster battery.
q After connecting battery cables, ensure that they are tightly clamped to battery terminals for good
contact.
q Never add distilled water through the hole used to check specific gravity.
METHODS OF PREVENTING OVER-DISCHARGE
The following precautions must be taken to prevent over-discharging
a battery.
q The battery surface (particularly its top) should always be kept
clean and dry.
q The terminal connections should be clean and tight.
q At every routine maintenance, check the electrolyte level.
This also applies to batteries designated as "low maintenance"
and "maintenance-free".

MEL040F

q When the vehicle is not going to be used over a long period of
time, disconnect the negative battery terminal.

MEL041F

q Check the charge condition of the battery.
Periodically check the specific gravity of the electrolyte. Keep a
close check on charge condition to prevent over-discharge.

MEL042F

CHECKING ELECTROLYTE LEVEL
WARNING:
Do not allow battery fluid to come in contact with skin, eyes, fabrics, or painted surfaces. After touch-
ing a battery, do not touch or rub your eyes until you have thoroughly washed your hands. If acid con-
tacts eyes, skin or clothing, immediately flush with water for 15 minutes and seek medical attention.

Revision: July 2006 SC-4 2006 Quest
BATTERY

q Remove the cell plug using a suitable tool.
q Add distilled water up to the MAX level. A

MEL043F

D
Sulfation
A battery will be completely discharged if it is left unattended
for a long time and the specific gravity will become less than
1.100. This may result in sulfation on the cell plates. E
To determine if a battery has been sulfated, note its voltage and
current when charging it. As shown in the figure, less current
and higher voltage are observed in the initial stage of charging F
sulfated batteries.
A sulfated battery may sometimes be brought back into service
by means of a long, slow charge, 12 hours or more, followed by
G
a battery capacity test.
WKIA4166E

SPECIFIC GRAVITY CHECK H
1. Read hydrometer and thermometer indications at eye level.
2. Use the following chart to correct your hydrometer reading
according to electrolyte temperature. I

SC
MEL042FA

Hydrometer Temperature Correction
L
Battery electrolyte temperature

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo