Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Quest 2004-2009 Approved Nissan Quest 2007 FSU

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
FSU

>> Download FSU documenatation <<

Text preview - extract from the document

E SUSPENSION

SECTION
FRONT SUSPENSION
FSU B

FSU
CONTENTS
PRECAUTIONS ......................................................... 2 . INSTALLATION .................................................... 9
. F
Precautions ............................................................. 2
. Disassembly and Assembly ..................................... 9 .
PREPARATION .......................................................... 3. DISASSEMBLY .................................................... 9
.
Special Service Tools .............................................. 3 . INSPECTION AFTER DISASSEMBLY ............... 10 . G
Commercial Service Tools ....................................... 3 . ASSEMBLY ........................................................ 10
.
NOISE, VIBRATION, AND HARSHNESS (NVH) STABILIZER BAR .................................................... 11
.
TROUBLESHOOTING ............................................... 4 . Removal and Installation ....................................... 11.
H
NVH Troubleshooting Chart .................................... 4 . REMOVAL .......................................................... 11
.
FRONT SUSPENSION ASSEMBLY .......................... 5 . INSPECTION AFTER REMOVAL ...................... 11 .
Components ............................................................ 5
. INSTALLATION .................................................. 11
.
On-vehicle Service .................................................. 6. TRANSVERSE LINK ................................................ 13 . I
FRONT SUSPENSION PARTS ............................ 6 . Removal and Installation ....................................... 13.
Front Wheel Alignment ............................................ 6 . REMOVAL .......................................................... 13
.
DESCRIPTION ..................................................... 6 . INSPECTION AFTER REMOVAL ...................... 13 . J
PRELIMINARY INSPECTION .............................. 6 . INSTALLATION .................................................. 14
.
GENERAL INFORMATION AND RECOMMEN- FRONT SUSPENSION MEMBER ............................ 15 .
DATIONS ............................................................. 7
. Removal and Installation ....................................... 15.
K
THE ALIGNMENT PROCESS ............................. 7 . REMOVAL .......................................................... 15
.
CAMBER, CASTER AND KINGPIN INCLINA- INSPECTION AFTER REMOVAL ...................... 16 .
TION ..................................................................... 7
. INSTALLATION .................................................. 17
.
TOE-IN ................................................................. 7
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 18 . L
FRONT WHEEL TURNING ANGLE .................... 8 . General Specifications (Front) ............................... 18 .
COIL SPRING AND SHOCK ABSORBER ................ 9 . Front Wheel Alignment (Unladen*1) ...................... 18 .
Removal and Installation ......................................... 9 . Lower Ball Joint ..................................................... 19
. M
REMOVAL ............................................................ 9
. Wheelarch Height (Unladen*) ................................ 19 .

Revision: March 2006 FSU-1 2007 Quest
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions EES00208

G When installing rubber parts, final tightening must be car-
ried out under unladen condition* with tires on ground.
Oil will shorten the life of rubber bushings. Be sure to wipe
off any spilled oil.
*: Fuel, engine coolant and engine oil full. Spare tire, jack,
hand tools and mats in designated positions.
G After installing removed suspension parts, check wheel
alignment and adjust if necessary.
G Use flare nut wrench when removing or installing brake
tubes.
G Always torque brake lines when installing. SBR686C

G Lock nuts are unreusable parts; always use new ones.
When replacing, do not wipe the oil off the new lock nut before tightening.

Revision: March 2006 FSU-2 2007 Quest
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools EES00209

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description
B
(Kent-Moore No.)
Tool name
HT72520000 Removing outer tie-rod end and lower ball
(J25730-A) joint C
Ball joint remover

NT146

KV101J0010 Front suspension member removal FSU
(J-47242)
Engine support table

WBIA0658E
G
Commercial Service Tools EES0020A

Tool name Description
H
Attachment wheel alignment Measure wheel alignment
a: Screw M24 x 1.5 pitch
b: 35 mm (1.38 in) dia.
c: 65 mm (2.56 in) dia. I
d: 56 mm (2.20 in)
e: 12 mm (0.47 in)

NT148
J
Spring compressor Removing and installing coil spring

L
NT717

Engine lifting bracket Removing and installing suspension member
M

LEIA0062E

Power tool Loosening bolts and nuts

PBIC0190E

Revision: March 2006 FSU-3 2007 Quest
Symptom

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo